Miller Electric Delta-Fab Manuale utente
Delta-Fab
Input Power 3-Phase, 230/460/575 V
Rated Output
375 A at 100% Duty Cycle
450 A at 60% Duty Cycle
Voltage 10–45 V
Weight 374 lb (170 kg)
Industrial Applications
Heavy-to-Light Fabrication
Processes
MIG (GMAW)
with mild steel, flux cored,
stainless steel, and
aluminum wires
Quick
Specs
Delta-Fab™System MIG Welding
Power Source
Issued Nov. 2009 • Index No. DC/15
24A Wire Feeder
Input Power 24 VAC/ 7A
Electrode Wire Diameter Capacity
.023–3/32 in (0.08 –2.4 mm)
Wire Speed 75– 750 IPM (1.9– 19 m/min)
Remote Voltage Control Standard
Weight 40 lb (18 kg)
Large analog volt and ammeters for
easy viewing.
Solid-state weld contactor provides
longevity to match the ultra-durable
and reliable reputation of the Delta-Fab.
Large output voltage range provides
more flexibility on a variety of wire
diameters. Also aids operator with
voltage losses that occur when operating
long distances from power source.
115 VAC duplex receptacle provides
15 amps of auxiliary power.
Four-Drive-Roll feeding system with
independent tension control handles
small and large diameter wires. (Drive
rolls and guides ordered separately.)
Remote voltage control is standard.
Parameter adjustments can be made
in weld cell or at a remote location.
Run-in standard on 24A for better
arc-starting performance on a variety
of wires.
14-pin select is easy to set up with
no external switches to put in the
wrong position.
14-pin receptacle provides quick,
direct connection to wire feeders and
accessories.
The Power of Blue®
.
Welder is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
See option and package
descriptions on page 3.
NEW!MIGPower Source Solutions
Line voltage compensation keeps
welding parameters constant even
when input voltages change ±10%.
Eliminates need to change welding
parameters throughout the day.
Material specific output studs
provide the flexibility to produce the
optimal arc characteristics for
aluminum, stainless steel and all
other materials.
Thermal overload protection
automatically shuts down the system
to prevent high repair costs.
Auto Remote Sense™automatically
selects remote control requirements
through the 14-pin receptacle.
Eliminates switches and confusion
for the operator.
Delta-Fab™System
MIGRunner®Package shown
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
Equipment Sales US and Canada
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
1
2
3
4
Delta-Fab
CV Welding Power Source
High Temp
Shutdown ON
OFF
MILLER ELECTRIC MFG. CO., APPLETON, WI.
MADE IN
1
2
4
3
5
6
2
Control Panels
Performance Data
1. Voltage Meter
2. High Temperature Shutdown Light
3. Amperage Meter
4. Power Switch with Indicator Light
Note: Weld output studs are energized by controls on the wirefeeder.
Turn off power before connecting remote device.
1. Voltage/Wire Speed Meter*
2. Voltage/Wire Speed Switch*
3. Remote Voltage Control Standard
4. Wire Speed Control
5. Jog/Purge Switch
6. Trigger Hold Switch
*Optional
Note: Power switch is on rear panel.
Rated Welding Output
375 A at 35 VDC,
100% Duty Cycle
Voltage Range DC
10–45
Amps Input at Rated Load Output, 60 Hz, Three-Phase
230 V 460 V 575 V KVA KW
69 34.5 27.5 27.5 17.5
4* 2* 1.6* 1.61* 0.46*
Dimensions
H: 30 in (762 mm)
(including lift eye)
W: 23 in (585 mm)
D: 30-1/2 in (775 mm)
(including strain relief)
Net
Weight
374 lb
(170 kg)
Delta-Fab Specifications (Subject to change without notice.)
24A Wire Feeder Specifications (Subject to change without notice.)
*While idling.
VOLT/AMP CURVE – DELTA-FAB
800
600
500
400
1000
100
% DUTY CYCLE
WELDING AMPS
DUTY CYCLE CHART – DELTA-FAB
1510 20 50403025 60 70 80 90 100
DC AMPS
1000 200 600500400300 700 800
200
250
150
40
30
50
60
0
DC VOLTS
20
10
300
MAX
MIN
Input Power
24 VAC, 7 A, 60 Hz
Electrode Wire
Diameter Capacity
.023– 3/32 in (0.08 – 2.4 mm)
Maximum Spool
Size Capacity
60 lb (27 kg)
Wire Feed Speed
75 – 750 IPM
(1.9– 19 m/min)
(Use with CV
Power Sources.)
Conforms to European standards.
Certified to both the Canadian and U.S. Standards for welding equipment.
Dimensions
H: 11 in (279 mm)
W: 10-3/4 in (273 mm)
D: 23-1/2 in (597 mm)
Net Weight
40 lb (18 kg)
3
Genuine Miller Options
Digital Meter #186 498 Field
Dual-function, back-lit LCD digital meter
with selector switch. The digital meter
allows the wire feed speed to be preset in
meters per minute or inches per minute.
The voltage function will only monitor and
display the arc voltage. The voltage display
can also be calibrated if required.
Preflow/Postflow and Spot Control
#186 496 Field
Installs inside feeder under an easy access
hinged cover. Provides up to 5 seconds of
spot weld time and has adjustable timers
(0.25 to 5 sec.) for controlling gas flow
prior to arc initiation and after completion
of weld.
Option #1: Delta-Fab™System
Option #2: Delta-Fab™System Stationary Package
Option #3: Delta-Fab™System MIGRunner®Package
Packages
Purchase running gear and MIG kit
separately.
Delta-Fab™System
#951 022 (230/460/575 V, 60 Hz)
Comes complete With:
Delta-Fab™power source
24A wire feeder
Bernard®Q-Gun™
Stationary display without running
gear/cylinder rack.
Delta-Fab™System Stationary Package
#951 233 (230/460/575 V, 60 Hz)
Comes complete With:
Delta-Fab™power source
24A wire feeder
Bernard®Q-Gun™
Industrial MIG 4/0 Kit:
Smith®regulator/flowmeter with 10 ft
(3 m) gas hose, 10 ft (3 m) 4/0 feeder
weld cable with lugs, and 15 ft (4.6 m)
work cable with 600-amp C-clamp
MIGRunner system with factory-installed
running gear/cylinder rack.
Delta-Fab™System MIGRunner Package
#951 232 (230/460/575 V, 60 Hz)
Comes complete With:
Delta-Fab™power source
24A wire feeder
Bernard®Q-Gun™
Industrial MIG 4/0 Kit:
Smith®regulator/flowmeter with 10 ft
(3 m) gas hose, 10 ft (3 m) 4/0 feeder
weld cable with lugs, and 15 ft (4.6 m)
work cable with 600-amp C-clamp
Factory installed running gear/cylinder
rack
NEW!MIGPower Source Solutions
Industrial MIG 4/0 Kit #300 390
Consists of Smith®regulator/flowmeter
with 10 ft (3 m) gas hose, 10 ft (3 m)
4/0 feeder weld cable with lugs, and 15 ft
(4.6 m) work cable with 600-amp C-clamp.
Standard Running
Gear #042 886
The large 10 in
(254 mm) rear
wheels and 5 in
(127 mm) front
casters on this
running gear provide excellent mobility on
the shop floor, making it easier to move the
power source. Very easy to install. Handles
double as weld cable holder.
Standard Cylinder Rack #042 887
Holds two cylinders. Only installs on
Standard Running Gear.
Turntable Assembly #146 236
Allows rotation of the feeder as the operator
changes work positions. Reduces strain
and bending on the gun cable.
Wire Reel Assembly #108 008
For 60 lb (27 kg) coil of wire.
(Cannot use when handle is installed.)
Feeder Cart #043 698 Field
A low-profile creeper cart with high-quality
rubber casters, front swivel and rear rigid.
Carrying Handle #193 762
For lifting and moving feeder.
Spool Cover #057 607
For 12 in (304 mm) spool.
Hanging Bail #058 435
Suspends feeder over the work area.
Reel Cover #058 256
For 60 lb (27 kg) coil.
Spool Adapter #047 141
For use with 14 lb (6.4 kg) spool
of Lincoln self-shielding wire.
Extension Cords
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
Used to extend interconnecting cords.
Distributed by:
Equipment and Options Stock No. Description Qty. Price
Delta-Fab System Power Source, Feeder & Gun Only #951 022 230/460/575 V, 60 Hz
Delta-Fab System Stationary Package #951 233 230/460/575 V, 60 Hz
Delta-Fab System MIGRunner Package #951 232 230/460/575 V, 60 Hz
Digital Meter #186 498 Field
Preflow/Postflow and Spot Control #186 496 Field
Accessories
Industrial MIG 4/0 Kit #300 390 Includes Smith regulator/flowmeter with 10 ft (3 m) gas hose,
10 ft (3 m) 4/0 feeder weld cable with lugs, and 15 ft (4.6 m) work cable
with 600-amp C-clamp
Standard Running Gear #042 886
Standard Cylinder Rack #042 887
Wire Reel Assembly #108 008 For 60 lb (27.2 kg) coil
Feeder Cart #043 698 Field
Carrying Handle #193 762
Turntable Assembly #146 236
Hanging Bail #058 435
Spool Cover #057 607 For 12 in ( 304 mm) spool
Reel Cover #058 256 For 60 lb (27.2 kg) coil
Spool Adapter #047 141 For 14 lb (6.4 kg) Lincoln spool
Extension Cords
Date: Total Quoted Price:
Ordering Information
Litho in USA
Hanging Bail
Spool Cover
Feeder Cart
Turntable
Assembly
Wire Reel
Assembly
Carrying Handle
Genuine Miller Accessories
Altri manuali per Delta-Fab
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Miller Electric Sistema di saldatura
Miller Electric
Miller Electric Spoolmatic 30A Manuale utente
Miller Electric
Miller Electric Spectrum 1251 Manuale utente
Miller Electric
Miller Electric SRH-503 Manuale utente
Miller Electric
Miller Electric SW3 Manuale utente
Miller Electric
Miller Electric Millermatic 150 Manuale utente
Miller Electric
Miller Electric MP-65E Manuale utente
Miller Electric
Miller Electric DS-74D16 Swingarc Manuale utente
Miller Electric
Miller Electric MIGHT High Power TIG 150 Manuale utente
Miller Electric
Miller Electric Spectrum 875 Auto-Line Manuale utente
Miller Electric
Miller Electric Big Blue 502P Manuale utente
Miller Electric
Miller Electric SuitCase X-TREME 8VS WCC Manuale utente
Miller Electric
Miller Electric SuitCase X-TREME 8 OS Manuale utente
Miller Electric
Miller Electric XMS 4000 Manuale utente
Miller Electric
Miller Electric Big Blue 300 P Manuale utente
Miller Electric
Miller Electric XMT 350 CC/CV Manuale utente
Miller Electric
Miller Electric STR 450 Manuale utente
Miller Electric
Miller Electric SR-200 Manuale utente
Miller Electric
Miller Electric 145 Manuale utente
Miller Electric
Miller Electric 172 M-10 Gun Manuale utente
Miller Electric
Miller Electric Snap Start II Manuale utente
