MIMAKI JFX 200-2513 Manuale

Make sure to wear the attached

goggles and glove when you work.

JFX200-2513 / JFX500-2131

Cleaning procedure of head nozzle

Only when the nozzle drop out doesn’t recover with cleaning, daily care and maintenance, please clean

the head nozzle following the procedure below.

Procedure

1. Remove the left side cover of

the machine.

Remove the screw and remove the

cover.

2. Move the carriage(head) to the maintenance space.

(1) Press the key in LOCAL.

(2) Press the key.

(3) Press to select [HEAD MAINT.].

(4) Press the key.

•

Before performing the maintenance, please make sure to attend the training by our engineers. Maintenance

without training may cause failure of the head.

• During maintenance, never rub the nozzles of the head. If rub the nozzle part, the water-repellent surface is

degraded and the head might need to be replaced.

Supply goods for cleaning

Nozzle swab (100) Cleaning stick (50) F200/LF200 Cleaning liquid

for maintenance (100mℓ)

No.SPC-0421 No.SPC-0527 No.SPC-0568

• Make sure to use designated supply goods for nozzle cleaning. Other cleaning goods may cause early

deterioration of the head.

• Head will move for maintenance, please be careful.

[JFX200] Remove the screws

at two positions.

[JFX500] Remove the screws

at four positions.

Cover

Cover

MAINT.

© 2016 MIMAKI ENGINEERING CO., LTD. M018365-00(D203018-10)-15042016

3. Wet a new “nozzle swab” or “clean stick” with the cleaning

solution.

Please wet enough the cleaning solution.

4. Clean the nozzle surface.

(1) Press the "nozzle swab" or "cleaning stick", absorbing cleaning liquid,

against nozzle surface softly for about 10 seconds.

(2) Perform the work (1) to the entire nozzle surface.

5. Press the key after the cleaning.

After initial operation, carriage (head) return to the original position.

Please close the cover.

6. Implement the cleaning [NORMAL].

Please operate with reference to Chapter 4 of the Operation Manual.

7. Perform test printing and check the print result.

Repeat the cleaning and test printing until the result becomes normal.

• Please do not reuse the used clean stick.

It may cause nozzle clogging.

• Please do not rub the nozzle surface and press down strongly

sponge part with your fingers. Nozzle surface is damaged, and it

may cause the discharging defects.

• Please do not re-use the clean stick which was used once. Always

use a new clean stick seconds.

Press softly for 10 seconds

Nozzle surface

KT

Altri manuali per JFX 200-2513

5

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali MIMAKI Plotter

MIMAKI

MIMAKI CG-60SRIII Manuale utente

MIMAKI

MIMAKI JV400-SUV Series Manuale di manutenzione

MIMAKI

MIMAKI Tx400 Manuale utente

MIMAKI

MIMAKI CF3-1631 Manuale utente

MIMAKI

MIMAKI JV400-SUV Series Guida rapida

MIMAKI

MIMAKI DM2-1810 Manuale utente

MIMAKI

MIMAKI JV3 Series Manuale utente

MIMAKI

MIMAKI TS34-1800A Guida di riferimento

MIMAKI

MIMAKI TEXTILE JET TX400 Manuale utente

MIMAKI

MIMAKI CJV30 Series Manuale utente

MIMAKI

MIMAKI UJF-7151 plus Manuale utente

MIMAKI

MIMAKI JV33 Series Istruzioni operative

MIMAKI

MIMAKI ME-300STII Manuale utente

MIMAKI

MIMAKI CG-60SL Istruzioni per il montaggio

MIMAKI

MIMAKI APC-130 Manuale utente

MIMAKI

MIMAKI CF2 Series Manuale utente

MIMAKI

MIMAKI CG-60st Manuale utente

MIMAKI

MIMAKI CJV150 series Manuale utente

MIMAKI

MIMAKI CF-0912 Manuale utente

MIMAKI

MIMAKI JV33 Series Istruzioni per il montaggio

MIMAKI

MIMAKI JV33-260 Manuale utente

MIMAKI

MIMAKI CG-60AR Istruzioni per l'installazione

MIMAKI

MIMAKI TPC-1000 Manuale utente

MIMAKI

MIMAKI CG-AR Series Manuale di manutenzione

Manuali Plotter popolari di altre marche

MUTOH

MUTOH Kona 760 Manuale utente

HP

HP 7475a Manuale utente

Vulcan-Hart

Vulcan-Hart FC-500VC Manuale utente

Roland

Roland TrueVIS VG-640 Manuale del proprietario

Furuno

Furuno RP-180 Manuale utente

Roland

Roland VersaCamm SP-540V Manuale utente

Ioline

Ioline Summit Manuale utente

Summa

Summa S CLASS Manuale utente

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuale utente

Furuno

Furuno RP-17 Manuale utente

HP

HP 7470A Manuale utente

SII

SII LP-1010 Manuale utente

Great Computer

Great Computer JII-61 Manuale utente

Roland

Roland VersaUv LEF - 12i Manuale utente

Lectra

Lectra Alys 120 Manuale utente

MUTOH

MUTOH Ultima SC-850D Manuale utente

Skycut

Skycut D Series Manuale utente

Commodore

Commodore 1520 Manuale utente