Minar LEE-1001DMX Manuale utente
LED LIGHT ENGINE
INSTRUCTION MANUAL
10W LED DMX Illuminator
MODEL: LEE-1001DMX
A. INSTRUCTION FOR LED LIGHT ENGINE
Voltage: 12DC
Avoid use in high temperature areas. (Below 104 Degrees)
Color: White
Light Source: 10W LED
Power Consumption: 15W
LED Life: 50,000 hours
Max. Quantity for Fiber Connection: 400 X 0.75mm fiber optic per port
Wheels: 1 Twinkle and 1 Color
B. INSTALLATION:
C. Light Engine Setting
1. DIP address setting:
No. 1-9 as DIP address or program number.
No. 10 and 11 as Remote Control must be in ON position for remote to work.
No. 11 is Master/Slave
No. 12 is optional
2. The connection of DMX Signal Control Mode:
3. The connection of Master/Slave Control Mode:
4. Signal Wire and Connector Link:
6. Remote Control:
DIP 10 and 11 must be in the ON position. DIP 1-9 and 12 must be in OFF position. Press the
Clear or Cancel key to clear any previous programs. Choose program from chart and press
corresponding number, then press enter key.
Program number is larger than keys on remote:
Example: You want program 7. Press cancel then key 6 key 1 then enter. (6 + 1 = 7)
Example2: You want program 9. Press cancel then key 4 key 5 or key 3 key 6 then enter (4 + 5 =9) or (3
+ 6 = 9)
Example 3: You want program 18. Press cancel then key 6,6,6 then enter. (6 + 6 + 6 = 18) Or push key 1
18 times then enter.
