MiniFinder Xtreme Manuale utente
MiniFinder®Xtreme
User Manual
English
© 2020 MiniFinder® All rights reserved
Updated: 2020/11/18
User Manual
www.mininder.com 1of 16
minifinder xtreme
Thank you for purchasing a MiniFinder®product. We believe you made the right choice. MiniFinder®
Xtreme is full of smart features that help you monitor, protect and locate your loved ones remotely.
Before you start using your Xtreme, please read this manual in its entirety.
Thank you!Thank you!
PACKAGE CONTENTSPACKAGE CONTENTS
HARDWARE REVIEWHARDWARE REVIEW
1 MiniFinder Xtreme 1
CB
LED Light Magnets
Function Key
To charge the battery in the GPS tracker, unscrew the small metal cap on the side of the unit
and connect the power adapter.
Here shows an LED light that indicates the status of the unit in three different colors, red,
blue and purple.
A
B
CHere shows the bottom of the unit. The two enclosed steel plates are two super magnets. The
button in the middle is a “Function key” which is activated when i.e. an unauthorized person
dismantles the device. The owner is notied via MiniFinder GO about “Function key” being
activated. The alarm button is congured in the MiniFinder GO system.
A
Power Connector
Metal Cap
2
2 Charger
User Manual
www.mininder.com 2of 16
minifinder xtreme
CHARGINGCHARGING
A
B
Unscrew the small metal cap on the side of the unit
with hand or a small screwdriver.
Insert the power adapter into the unit’s connector as
shown on the right. Then plug the adapter into the
power outlet to start charging.
For the rst time charging, the battery should be charged between 8h to 12h. Next time charging,
device is fully charged after approx. 4h.
START-UPSTART-UP
To start your Xtreme for the rst time, open the steel cover at the bottom of the unit. Behind the SIM
card is a small red lever. Use a pen and pull the lever to the left (as shown in the picture). The LED
will now ash, which means your device is on.
Remember to charge your device on time! You will receive an alarm message at a low battery level. If
the battery becomes fully discharged, you will need to restart the GPS Tracker: after fully charged, pull
the red lever rst to the right and then left again to start it.
User Manual
www.mininder.com 3of 16
minifinder xtreme
DOWNLOAD MINIFINDER GO APPDOWNLOAD MINIFINDER GO APP
To set up and track MiniFinder Xtreme, you need to download MiniFinder GO GPS Tracking System APP.
Download the app by searching the “MiniFinder GO GPS Tracking” in Apple App Store
or Google Play store. Install the app to log in with your created or assigned login details.
If you read the documentation on your mobile phone, please click on the link below to
download the APP.
Apple iPhone: https://apple.co/2P3oYxN Android: http://bit.ly/2IengsS
EXPLANATION OF LED LIGHTSEXPLANATION OF LED LIGHTS
BLUE LED:
1 sec Slow blink =
Connected to GPS satellite
No light =
Sleep mode or turned off
RED LED:
1 sec Slow blink =
Connected to GSM network
0.1 sec
PURPLE LED:
1 sec Slow blink =
Connected to GPS & GSM network
Fast blink =
Searching for GPS & GSM network
User Manual
www.mininder.com 4of 16
minifinder xtreme
APP OverviewAPP Overview
After logging in to the MiniFinder GO APP, you can see this view.
This consists of 9 different parts:
1. Menu (Device list)
2. Alarm notication
3. Create / Edit GeoFence
4. Applications settings
5. Application info & Help
6. View the position of my mobile phone
7. Zoom in / out
8. View street information of a selected GPS device
9. GPS device location indication on the map
Menu/Device ListMenu/Device List
Click the menu icon to open the menu. The menu consists of one or more devices (GPSs) depending
on how many licenses you have in the system.
1. Unit name
2. Time for last position
3. Status icons: Vehicle battery voltage, GPS signal,
GSM signal and motion
4. Action menu (history, settings, ...)
Xtreme #12345
User Manual
www.mininder.com 5of 16
minifinder xtreme
Device StatusDevice Status
A GPS unit can have three different colors indicating status. Green (Online), Orange (Passive),
Red (Passive) and White (Ofine).
A) Green: The device is online and sending position right now.
B) Orange: The device is passive and has sent last position more than 10 minutes ago.
C) Red: The device is passive and has sent last position more than 1 hour ago.
D) White: The device is ofine.
Action MenuAction Menu
At the far right of the row of units is an Action Menu (three vertical points). In the Action Menu you
can see history (History) and settings (Setup).
Regardless of the device’s status, you can always press the device row to display the latest
position on the map.
Xtreme #12345
User Manual
www.mininder.com 6of 16
minifinder xtreme
HistoryHistory
See positioning history on the map based on date and time.
- Start by clicking the Action Menu (1), then click “History” (2).
- Select a time period and then click “View History” to display the device’s positioning history.
Xtreme #12345
Alarm NoticationAlarm Notication
The MiniFinder GO app supports various types of alarms: Geofence alarm, speeding alarm, etc. All
alarms send an alarm notication to the phone’s or tablet’s screen. Audio alert, vibration and ashing
alarm can be activated when opening the APP.
Images below show examples of alarm notications:
- An example of notications on the phone screen. - A ashing bell at the top right corner of the app
- Click on the ashing alarm bell to see active alarms. Click on active alarms to conrm and move them
to the alarm history.
Xtreme #12345
Xtreme #12345
User Manual
www.mininder.com 7of 16
minifinder xtreme
- The following information is displayed for positioning history:
1. A is the start position
2. B is the end position
3. Indicates a particularly selected position
4. The start date and time
5. The end date and time
6. Drag the blue dot to see a particular
position (3) on the map.
- When bringing up the sub screen, the detailed statistics are shown, including total distance,
total time and max speed. To clear the selected history, simply click “Clear History”
User Manual
www.mininder.com 8of 16
minifinder xtreme
Speeding AlarmSpeeding Alarm
Click Action Menu (1) of the device that you want to set Speeding Alarm to, and then click “Setup” (2).
Activate ”Speeding Alarm” (1). Drag the circle to a desired speed (2). Finally, click “Apply” (3) to set
the alarm for speeding.
Rename DeviceRename Device
Edit device name through Device Setting.
Click the Action Menu (1) and then click on the “Setup” (2). Edit device name (3) with your preference.
Then click “Apply” (4) to save the changes.
Xtreme #12345
User Manual
www.mininder.com 9of 16
minifinder xtreme
CommentsComments
In the comment section, you can add additional information about your MiniFinder.
To create a comment:
- Click on the action menu and then click on “Comment”.
- Enter your comment in “Write comment” and then click “Save”.
2
1
Altri manuali per Xtreme
2
Indice
Altri manuali MiniFinder GPS
MiniFinder
MiniFinder Nano Manuale utente
MiniFinder
MiniFinder Atto Pro 4G Manuale utente
MiniFinder
MiniFinder Atto Pro Manuale utente
MiniFinder
MiniFinder Pico 4G Manuale utente
MiniFinder
MiniFinder Xtreme Manuale utente
MiniFinder
MiniFinder PICO Manuale utente
MiniFinder
MiniFinder Zepto Manuale utente
MiniFinder
MiniFinder PICO Manuale utente
MiniFinder
MiniFinder WeHunt Manuale utente
MiniFinder
MiniFinder PICO Manuale utente
