Thank you very much for purchasing Minimo ONE Series POLYTOR Power Pack.
This product is the polytor power pack for polytor handpieces. Read carefully this instruction
manual before use. Also read carefully the instruction manuals of handpieces. Please keep this
instruction manual near the power pack for any operators to refer to whenever operating this
system. If you lost your instruction manual, download it from our website.
Introduction
1 2
Caution
Warning
■For your ear protection, wearing earplugs on work is recommended while using ultrasonic devices.
○Unexpected damage may occur caused by loud sound while working.
■Do not turn the ULTRASONIC ON/OFF switch and hand switch on if the SENTAN TOOL was not fixed firmly.
○Reduction of output voltage and overheating of handpiece may result in fire and malfunction.
●Read the precautions below to ensure safe use and handling. These precautions are intended to
protect you and others around you. Read and follow them carefully to avoid injury, damage to the
product or damage to property.
●User may bear administrative responsibilities for operation and maintenance.
■ About Warning and Caution
Safety instructions are classified as Warning and Caution in accordance with the risk.
Warning Caution
■ About Symbols
This symbol denotes that an instruction must
be obeyed at all times. This symbol denotes that the action is prohibited.
The symbols have the following meanings.
Cautions for handling and operation
This indicates that incorrect
operation presents significant
danger of accident, resulting in
death or serious injury to users.
This indicates that incorrect
operation presents possibility of
injury to users or damage to the
product.
Warning
■If each cords are damaged, replace it with new cords(separately sold).
○Failure to do so could result in fire, electric shock, and/or failure.
■Keep the main switch off when connecting handpieces to power pack.
○Failure to do so could result in fire, electric shock, and/or failure.
■Keep away from cutting fluids, water and/or oil mist.
○Failure to do so could result in fire, electric shock, and/or failure.
■Do not plug in and out with wet hands.
○Wet hands could result in electric shock.
■If the power cord is damaged, replace it with new power cord (separately sold).
○Failure to do so could result in fire and/or electric shock.
■Plug the power cord to a grounded outlet.
○
Plugging into an outlet without ground could result in electric shock, static electricity injury, network disturbance, noise breakout and/or etc.
■Do not use the power pack with any input voltage except the voltage instructed on power pack.
○Failure to do so could result in fire and/or electric shock.
■Do not close the air holes on the top of the power pack.
○Failure to do so could result in increasing temperature inside of the power pack, resulting in fire and/or failure.
■Always wear safety glasses and a mask for dust.
○Chips and/or dust left after grinding/polishing process could result in unexpected injury.
■Always ask us for repair.
○Failure to do so could result in fire, electric shock, and/or failure.
○Also this may have a significant impact on its safety and performance.
■Do not modify and/or disassemble the power pack.
○Failure to do so could result in fire, electric shock, and/or failure.
○Also this may have a significant impact on its safety and performance.
■
In case of abnormal noise, smoke, and/or bad smell, turn off the main power and unplug the power cord.
○Failure to do so could result in fire and/or electric shock.
■Do not use in a place with corrosive gas such as chlorine gas, hydrogen sulfide and/or sulfurous acid gas.
○Failure to do so could result in fire, electric shock, and/or failure.
■Do not drop and/or hit.
○Failure to do so could result in malfunction and/or failure.
■Do not use in a place near machines remarkably emitting electric noise.
○Failure to do so could result in malfunction and/or failure.
■Do not use electronic apparatus, signal cable and such equipments near this product.
○Noise may affect operation of the device.
■Use the power pack in a place without condensation.
○Failure to do so could result in fire, electric shock, and/or failure.
■Use in temperature between 0 - 40℃.
○Failure to do so could result in malfunction and/or failure.
■Do not put heavy things on the power cord.
○The damaged power cord may result in fire, electric shock, and/or failure.
■Do not put the power cord near heater.
○Failure to do so could result in fire, electric shock, and/or failure.
■Do not pull the power cord when unplugging.
○The damaged power cord could result in fire, electric shock, and/or failure.
■For maintenance, unplug the power cord for safety.
○Failure to do so could result in electric shock and/or failure.
■
For disposal of this power pack, please follow the instruction of your local government or the shop you purchased the product.
■Do not allow children to use this product. Also, keep away from children.
■Be careful for dust, oil, water not to enter the inside of the power pack.
If entering, turn off the main switch and unplug the power cord. Then, ask us for repair.
○Failure to do so could result in fire, electric shock, and/or failure.
■When you leave the workshop, turn off the main switch and unplug the power cord from the outlet for safety.
■
Do not touch joint part of holder, holder and SENTAN TOOL while handpiece is in operation and immediately after stopping.
○There is a risk of burn and injury due to high temperature.
