MinimumRC Minimoa Manuale utente

Indice

Altri manuali MinimumRC Giocattolo

MinimumRC

MinimumRC Cessna L-19 Manuale utente

MinimumRC

MinimumRC P40 Q Series Manuale utente

MinimumRC

MinimumRC T-28 Trojan Manuale utente

MinimumRC

MinimumRC J-3 Manuale utente

MinimumRC

MinimumRC F8F-RareBear Pro Manuale utente

MinimumRC

MinimumRC P-51 Mustang Manuale utente

MinimumRC

MinimumRC F8F Rare Bear Manuale

MinimumRC

MinimumRC NANCHANG CJ-6 Manuale utente

MinimumRC

MinimumRC Messerschmitt BF-109 Manuale utente

MinimumRC

MinimumRC T-28 Trojan Manuale utente

MinimumRC

MinimumRC DH-88 Comet Manuale utente

MinimumRC

MinimumRC Butterfly V1 Manuale utente

MinimumRC

MinimumRC Ju-87 Manuale utente

MinimumRC

MinimumRC Beech V-35 Manuale

MinimumRC

MinimumRC Flycat Manuale utente

MinimumRC

MinimumRC Fan-Jet 600 Manuale utente

MinimumRC

MinimumRC Spacewalker V2 Manuale utente

MinimumRC

MinimumRC Tigermoth Manuale utente

MinimumRC

MinimumRC ASG-32 Manuale utente

MinimumRC

MinimumRC LISA Manuale utente

MinimumRC

MinimumRC A6M5-Q Series Manuale utente

MinimumRC

MinimumRC A6M5-D Manuale utente

MinimumRC

MinimumRC Shrimp V2 Manuale utente

MinimumRC

MinimumRC Cessna-152 Manuale utente

Manuali Giocattolo popolari di altre marche

marklin

marklin 37321 Manuale utente

Canon

Canon PAPER CRAFT Manuale utente

GREAT PLANES

GREAT PLANES Pitts M-12S Manuale utente

NOCH

NOCH 14261 Manuale utente

Hausler

Hausler 450 SE V2 Manuale utente

Dynaflite

Dynaflite Daydream Manuale utente

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuale

Kenner

Kenner Batman 63651 Manuale utente

LEGO

LEGO 8527 Manuale utente

iKarus

iKarus ECO 8 Manuale utente

Multiplex

Multiplex EasyStar II Manuale di istruzioni

Walkera

Walkera 38 Manuale di istruzioni

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuale utente

MD

MD MXION SWD Manuale utente

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuale utente

marklin

marklin 39671 Manuale utente

Meccano

Meccano 15103 Manuale utente

LEGO

LEGO TECHNIC 8735 Manuale utente

Assembly Instructions

Important notification

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for

bonding wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next installation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be

used for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. assemble the wooden base.

2. Wooden parts of the fuselage.

3. Assemble the wooden parts of the fuselage. Please pay attention to the opening direction of

the servo base and do not reverse it.

4. fix the motor with a tie, and the fixed end of the tie should be just at the bottom. After fixing,

502 glue shall be applied to the side for reinforcement.

5. Details.

6. Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the

servos arms return to their neutral point. Test whether the servos are working correctly, and

install the servo arms according to the position shown in the picture.

Note: Please make sure that the servos have been tested and installed in strict accordance with

the following picture. After assembling the model, it will be not able to adjust.

7. (bottom view) The servos are installed and fixed under the plywood board.

8. Align the scribed line on the inner side of the fuselage and fix the wooden s tructure with glue.

9. Press the top and bottom strip of the fuselage and bend them into the corresponding shape of

the fuselage.

10. Fix the top and bottom strip of the fuselage with glue.

11. Details: cut off the position where the fuselage side strip interferes with the tie.

12. Fix the receiver with Velcro, connect the cables, and fix the cables with tie. The power wire

shall pass through the hole on the wooden part and be placed on the upper part of the fuselage.

Test whether the servos and motor are working correctly.

13. Fix the vertical tail with stickers.

14. Combine the fuselage.

15. Paste the fuselage sticker.

16. Paste the fuselage sticker.

17. Paste the fuselage sticker.

18. Paste the fuselage sticker.

19. Paste the fuselage sticker.

20. Use the end of a screw driver to score through the half-cut line of the horizontal tail surface.

21. Use the end of a screw driver to score through the half-cut line of the wings.

22. Use the end of a screw driver to score through the half-cut line of the wings.

23. Install the tail.

24. Attach the inner part of the wings to the fuselage.

25. Attach the outer part of the wings.