MINN KOTA RIPTIDE TERROVA Manuale utente

RIPTIDE TERROVA

BOW-MOUNT TROLLING MOTOR

Installation Instructions

INTRODUCTION

Made by Minn Kota

Johnson Outdoors

Marine Electronics, Inc.

121 Power Drive

Mankato, MN 56001 USA

Trolling Motors

Produced in XXXX

PRODUCT DESCRIPTION

MODEL XXXXXXX

XXV DC

XX A

SER NO YYDDDC00000

NOTICE: The serial number on your Riptide Terrova is

located inside the mount below the motor rests. EXAMPLE

THANK YOU

Thank you for choosing Minn Kota. We believe that you should spend more time ﬁshing and less time positioning your boat. That’s why

we build the smartest, toughest, most intuitive trolling motors on the water. Every aspect of a Minn Kota trolling motor is thought out and

rethought until it’s good enough to bear our name. Countless hours of research and testing provide you the Minn Kota advantage that can

truly take you “Anywhere. Anytime.” We don’t believe in shortcuts. We are Minn Kota. And we are never done helping you catch more ﬁsh.

REGISTRATION

Remember to keep your receipt and immediately register your

trolling motor on our website at minnkotamotors.com/register.

SERIAL NUMBER

Your Minn Kota 11-character serial number is very important. It

helps to determine the speciﬁc model and year of manufacture.

When contacting Consumer Service or registering your product,

you will need to know your product’s serial number. A duplicate

copy of your serial number label has been included, which can also

be entered into the One-Boat Network App for future reference.

NOTICE: Do not return your Minn Kota motor to your retailer. Your retailer is not authorized to repair or replace this unit. You may obtain

service by: calling Minn Kota at (800) 227-6433; returning your motor to the Minn Kota Factory Service Center; sending or taking your

motor to any Minn Kota authorized service center. A list of authorized service centers is available on our website, at minnkotamotors.com.

Please include proof of purchase, serial number and purchase date for warranty service with any of the above options.

MOTOR INFORMATION (For Consumer Reference Only)

Model: ___________________________________________________________________________________________________

Serial Number: _____________________________________________________________________________________________

Purchase Date: _____________________________________________________________________________________________

Store Where Purchased: ______________________________________________________________________________________

Made for iPhone®11 and iPhone X

For updated iOS, Humminbird® and Minn Kota® compatibility, visit minnkotamotors.com

Use of the Made for Apple badge means that an accessory has been designed to connect speciﬁcally to the Apple product(s) identiﬁed

in the badge, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation

of this device or its compliance with safety and regulatory standards. iPhone is a trademark of Apple Inc., registered in the U.S. and other

countries. The trademark "iPhone" is used in Japan with a license from Airphone K.K.

Android™ is a trademark of Google LLC. The Android™ robot is reproduced or modiﬁed from work created and shared by Google and used

according to terms described in the Creative Commons 3.0 Attribution License.

Made for

Android

™

minnkotamotors.com | 3

SAFETY CONSIDERATIONS

Please thoroughly read the user manual. Follow all instructions and heed all safety and cautionary notices. Use of this motor is only

permitted for persons that have read and understood these user instructions. Minors may use this motor only under adult supervision.

WARNING

You are responsible for the safe and prudent operation of your vessel. We have designed your Minn Kota product to be an accurate

and reliable tool that will enhance boat operation and improve your ability to catch ﬁsh. This product does not relieve you from the

responsibility for safe operation of your boat. You must avoid hazards to navigation and always maintain a permanent watch so you can

respond to situations as they develop. You must always be prepared to regain manual control of your boat. Learn to operate your Minn

Kota product in an area free from hazards and obstacles.

WARNING

Never run the motor out of the water, as this may result in injuries from the rotating propeller. The motor should be disconnected from

the power source when it is not in use or is o the water. When connecting the power-supply cables of the motor to the battery, ensure

that they are not kinked or subject to chafe and route them in such a way that persons cannot trip over them. Before using the motor

make sure that the insulation of the power cables is not damaged. Disregarding these safety precautions may result in electric shorts

of battery(s) and/or motor. Always disconnect motor from battery(s) before cleaning or checking the propeller. Avoid submerging the

complete motor as water may enter the lower unit through control head and shaft. If the motor is used while water is present in the lower

unit considerable damage to the motor can occur. This damage will not be covered by warranty.

WARNING

Take care that neither you nor other persons approach the turning propeller too closely, neither with body parts nor with objects.

The motor is powerful and may endanger or injure you or others. While the motor is running watch out for persons swimming and for

ﬂoating objects. Persons who lack the ability to run the motor or whose reactions are impaired by alcohol, drugs, medication, or other

substances are not permitted to use this motor. This motor is not suitable for use in strong currents. The constant noise pressure level of

the motor during use is less than 70dB(A). The overall vibration level does not exceed 2,5 m/sec2.

WARNING

When stowing or deploying the motor, keep ﬁngers clear of all hinge and pivot points and all moving parts. In the event of unexpected

operation, remove power leads from the battery.

WARNING

It is recommended to only use Johnson Outdoors approved accessories with your Minn Kota motor. Using non-approved accessories

including to mount or control your motor may cause damage, unexpected motor operation and injury. Be sure to use the product and

approved accessories, including remotes, safely and in the manner directed to avoid accidental or unexpected motor operation. Keep all

factory installed parts in place including motor and accessory covers, enclosures and guards.

KNOW YOUR BOAT

KeelKeel

BowBow

HullHull

BowBow

SternStern

PortPort

PortPort StarboardStarboard

StarboardStarboard

GunwaleGunwale

TransomTransom

InboardInboard

OutboardOutboard

minnkotamotors.com | 5

INSTALLATION

INSTALLATION PARTS LIST

Item /Assembly Part # Description Qty.

Includes 1-4 2994864 BAG ASSEMBLY - (BOLT, NUT, WASHERS) 1

1 2263462 SCREW-1/4-20 X 2" S/S PPH ADJT 6

2 2261713 WASHER-1/4 FLAT 18-8 SS 6

3 2263103 NUT-1/4-20 NYLOCK SS 6

4 2301720 WASHER-MOUNTING - RUBBER 6

5✖MOTOR ASSEMBLY 1

6 2390802 LANYARD w/CARARBINER IP RMT U2 1

7 411690-1 TROLLING MOTOR REMOTE 1

Includes 8-11 1378170 PROP KIT 2091170 PWR PRP GENII *55LB* 1

Includes 8-11 1378132 PROP IND 233160 WDLS WDG II *80LB* 1

Includes 8-11 1378160 PROP KIT 2341160 112# WW2 *112LB* 1

82092600 PIN-DRIVE 1.06" LG (SS) *55LB* 1

2262658 PIN-DRIVE 1" X 3/16" S/S *80LB* *112LB* 1

92151726 WASHER-5/16 STD (S/S) *55LB* 1

2091701 WASHER-PROP (LARGE) *80LB* *112LB* 1

10 2053101 NUT-PROP,NYLOC (MED) 5/16 SS *55LB* 1

2093101 NUT-PROP,NYLOC,LG, 3/8 SS *80LB* *112LB* 1

2091170 PROP-PWR (3 5/8") REAMED *55LB* 1

2331161 PROP-WW2 4" WELDED *80LB* 1

2341161 PROP-WW2 4.5" WELDED *112LB* 1

12 490384-4 CABLE, ETHERNET (M12-M12), 30' 1

13 490380-1 CABLE, ETHERNET PIGTAIL-700 HD 1

14 2992371 STABILIZER, BWMT ES TM ASM *72"* 1

HH 2996400 HEADING SENSOR ASSEMBLY 1

p2327135 MANUAL, RT TERROVA 3 PM 1

p2327137 MANUAL-INSTLL GD RT T3 PM 1

p2377179 INSTR.SHEET, MKA-60 STABILIZER *72"* 1

p2397110 MANUAL, WIRELESS REMOTE 1

p2397115 GUIDE-QCK REFERENCE iP 4.0 1

p2294950 INSTRUCTIONS,OBN & REMOTE PAIR 1

BATTERYMETER

TESTWITHMOTOROFF

TEST

RIPTIDETERROVA

1313

HHHH

1212

991010 881111

1414

AAAA

BBBB

CCCC

DDDD

INSTALLING THE RIPTIDE TERROVA

Your new Riptide Terrova comes with everything you’ll need to directly install it to the boat. This motor can be directly mounted to the boat or

coupled with a Minn Kota quick release bracket for ease of mounting and removal. For installation with a quick release bracket, refer to the

installation instructions provided with the bracket. For compatible quick release mounting brackets and to locate your nearest dealer, visit

minnkotamotors.com. To install the motor directly to the boat, please follow the instructions provided in this manual. Please review the parts list,

mounting considerations and tools needed for installation prior to getting started. For additional product support, please visit minnkotamotors.com.

pNot shown on Parts Diagram.

✖This part is included in an assembly and cannot be ordered individually.

INSTALLING THE RIPTIDE TERROVA

It is recommended that the motor be mounted as close to the centerline of the boat as

possible. Make sure the area under the mounting location is clear to drill holes and install

nuts and washers. Make sure the motor rest is positioned far enough beyond the edge of

the boat. The motor must not encounter any obstructions as it is lowered into the water

or raised into the boat when stowed and deployed. Consider a quick release or adapter

bracket with the installation of your motor. To view a list of accessories, please visit

minnkotamotors.com.

INSTALLING THE RIPTIDE TERROVA

a. Place the mount on an elevated, level surface such

as a workbench or the tailgate of a pickup. The

motor, as removed from the box, should be in the

stowed position.

b. Remove the four sideplate screws using a #3 Phillips

screwdriver. Two of these screws will be located on

each side of the mount.

DeployedDeployed StowedStowed

Sideplate ScrewSideplate Screw

• #3 Phillips Screwdriver

• Drill

• 9/32” Drill Bit

• 7/16” Box/Open End Wrench

• 9/16” Box/Open End Wrench

• Awl or similar Marking Tool

• Flat-blade Screwdriver

• Pliers or Vice Grip

• A second person to help with

the installation

NOTICE: This motor weighs approximately

65lbs. We recommend having a second person help

with the installation.

MOUNTING CONSIDERATIONS

TOOLS AND RESOURCES REQUIRED

INSTALLATION

11b

View accessories

available for your

trolling motor at

minnkotamotors.com.

minnkotamotors.com | 7

INSTALLING THE RIPTIDE TERROVA

Deck of BoatDeck of Boat

KeelKeel

Power CablesPower Cables

Right SideplateRight Sideplate

Left SideplateLeft Sideplate

Base ExtrusionBase Extrusion

WARNING

Make sure the motor is mounted on a level surface and is not

connected to a power source.

c. Remove the Right Sideplate.

d. Swing the Left Sideplate out and away from the

Base Extrusion.

e. Make sure that the Power Cables from the battery

are disconnected, or that the breaker,

if equipped, is "o."

f. Place the mount as close to the centerline or keel

of the boat as possible. The motor can be installed

on either the Port or Starboard side of the boat

based on personal preference. Check placement

with the motor in the stowed and deployed positions.

Review the mounting considerations at the beginning

of the installation.

INSTALLING THE RIPTIDE TERROVA

ITEM(S) NEEDED

#4 x 6

Drilling LocationsDrilling Locations

1-1/2"1-1/2"

MinimumMinimum

GunwaleGunwale

ShaftShaft

Base ExtrusionBase Extrusion

g. When the motor is in the deployed position, make

sure that the Shaft is 1-1/2" out past the Gunwale of

the boat. The lower unit, when stowed and deployed

must not encounter any obstructions.

h. Check to be sure that the mount is level. Use the

Rubber Washers (Item #4) provided to create a level

surface if necessary.

i. With an Awl or similar tool, mark all six mounting

holes in the Base Extrusion.

j. Drill through the deck of the boat using a 9/32" Drill

Bit on the marked locations.

minnkotamotors.com | 9

INSTALLING THE RIPTIDE TERROVA

#1 x 6 #4 x 6 #3 x 6#2 x 6

ScrewScrew

Rubber WasherRubber Washer

Boat DeckBoat Deck

Nylock NutNylock Nut Flat WasherFlat Washer

Right SideplateRight Sideplate

Left SideplateLeft Sideplate

Base ExtrusionBase Extrusion

ITEM(S) NEEDED

NOTICE: To prevent seizing of the stainless steel

hardware, do not use high speed installation tools.

Wetting the screws or applying an anti-seize may help

prevent seizing.

k. Put a 1/4-20 x 3 1/2" (Item #1) Screw into each of

the drilled locations. The Screw should pass through

the Base Extrusion and the boat deck. If the Rubber

Washers (Item #4) are used, they should sit between

the Base Extrusion and boat deck. Make sure to

secure the motor with screws on each side of the

Base Extrusion.

l. Place a Flat Washer (Item #2) and then a Nylock

Nut (Item #3) at the end of each screw and secure

with a 7/16” Box End Wrench. Make sure all

hardware is secure.

m. Replace the Right Sideplate.

n. Swing the Left Sideplate back into its correct

position on the Base Extrusion.

ADVANCED GPS NAVIGATION

Sideplate ScrewSideplate Screw

9o. Replace the four sideplate screws using a #3 Phillips

Screwdriver. Two of these screws will be located on

each side of the mount.

On motors with a shaft 60” or more, the Advanced GPS Navigation

Cable must exit the Coil Cord leaving three or more open coils

between where the cable exit and the motor base, as assembled by

the factory. Routing the Cable in any other manner will not allow the

motor to stow properly. When identifying features and establishing

connections, make sure to follow the critical cable routing.

Critical Cable Routing

BATTERYMETER

TESTWITHMOTOROFF

TEST

RIPTIDETERROVA

BATTERYMETER

TESTWITHMOTOROFF

TEST

RIPTIDETERROVA

At leastAt least

3 Coils3 Coils

Shafts 60 inches or more Shafts less that 60 inches

MotorMotor

BaseBase

MotorMotor

BaseBase

ShaftShaft

ShaftShaft AdvancedAdvanced

GPSGPS

NavigationNavigation AdvancedAdvanced

GPSGPS

NavigationNavigation

Your Minn Kota trolling motor and Humminbird ﬁsh ﬁnder communicate with each other to change the way you ﬁsh. Advanced GPS

Navigation oers a large array of features including controlling speed, steering, Spot-Lock, and the ability to record and retrace paths on

the water, all at your ﬁngertips. To learn more about the GPS capabilities available with your new motor, please refer to the Advanced GPS

Navigation Owner’s Manual by visiting minnkotamotors.com.

The wireless remote and GPS controller make up the Advanced GPS Navigation system. A wireless remote comes paired to the controller

from the factory. The GPS controller contains a very sensitive compass and is where all GPS satellite and remote signals are received. The

GPS controller is located in the trolling motor Control Head and may be connected to a ﬁsh ﬁnder from an Accessory Cable that exits the

Control Head. If the Advanced GPS Navigation system will be used with a ﬁsh ﬁnder, the Ethernet link between the trolling motor and the

ﬁsh ﬁnder should be connected.

ADVANCED GPS NAVIGATION

ROUTING THE ADVANCED GPS NAVIGATION CABLE

Altri manuali per RIPTIDE TERROVA

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali MINN KOTA Motore

MINN KOTA

MINN KOTA ULTERRA Guida alla risoluzione dei problemi

MINN KOTA

MINN KOTA RIPTIDE POWERDRIVE Manuale utente

MINN KOTA

MINN KOTA ULTERRA QUEST Manuale utente

MINN KOTA

MINN KOTA FORTREX Manuale utente

MINN KOTA

MINN KOTA ULTERRA Manuale utente

MINN KOTA

MINN KOTA VANTAGE Manuale utente

MINN KOTA

MINN KOTA TERROVA Manuale utente

MINN KOTA

MINN KOTA RIPTIDE INSTINCT QUEST Manuale utente

MINN KOTA

MINN KOTA ULTERRA Manuale utente

MINN KOTA

MINN KOTA 1810244 Manuale utente

MINN KOTA

MINN KOTA Riptide Ulterra Manuale utente

MINN KOTA

MINN KOTA Endura 50 Manuale utente

MINN KOTA

MINN KOTA MAXXUM Series Manuale utente

MINN KOTA

MINN KOTA RIPTIDE POWERDRIVE Manuale utente

MINN KOTA

MINN KOTA EO 1/2 HP Manuale utente

MINN KOTA

MINN KOTA RIPTIDE TERROVA 1363707 Manuale utente

MINN KOTA

MINN KOTA EDGE 30 Manuale utente

MINN KOTA

MINN KOTA Riptide 80 ST Manuale utente

MINN KOTA

MINN KOTA ULTREX Manuale utente

MINN KOTA

MINN KOTA RIPTIDE TERROVA Manuale utente

MINN KOTA

MINN KOTA EDGE Manuale utente

MINN KOTA

MINN KOTA RIPTIDE TERROVA Manuale utente

MINN KOTA

MINN KOTA TRAXXIS Manuale utente

MINN KOTA

MINN KOTA MKA 32 QRB Manuale utente

Manuali Motore popolari di altre marche

Rotax

Rotax 125 senior MAX evo Manuale utente

Kohler

Kohler K361 Manuale utente

MTD

MTD OHV Series Manuale utente

Kohler

Kohler COMMAND CH18-745 Manuale utente

Mercury

Mercury D4.2L D-Tronic Manuale utente

Selve

Selve SE Plus-RC Series Manuale utente

Perkins

Perkins 1206E-E66TA Manuale utente

Skov

Skov DA 174 Manuale

Rossi

Rossi TX11 Series Manuale utente

Siemens

Siemens SIMOTICS T-1FW3 Foglio di istruzioni

AL-KO

AL-KO PRO 350 Manuale utente

MTU

MTU 12 V 4000 Lx4 Manuale utente

Nanni

Nanni N3.30 Manuale di istruzioni

Nanni

Nanni N5.160 CR2 Manuale utente

KSB

KSB SuPreme Series Istruzioni per l'installazione

Hiwin

Hiwin EM1 Series Manuale utente

Rotax

Rotax 912 i series Istruzioni operative

Siemens

Siemens SIMOTICS XP 1MB1 Manuale utente