Miracall Technology mc-50 Manuale utente
Key Phone MC-50
Operation Manual
Content
I .Introduction ------------------------------------------------------------ 1
II. Technical Parameter -------------------------------------------------------------2
III. Function Key Introduction --------------------------------------------------------3
IV. Operation Instruction------------------------------------------------------------4
1
2
I. Introduction
MC-30 is a new kind of digital key phone developed by Miracall Technology Co.Ltd., specially
for MC-A100 and MC-832KA, KB, which has inherit traditional group phone merit and much bold
innovation. It can be connected with Ear Phone, Incoming Call Light, LED, and it’s inner structure
and outline is designed elaborately and so on. All of the above is embodied advantage of our group
phone. LED is adopted by STN technology. English and Chinese character can displayed on it
obviously and accurately. Making use of Chinese hint, Users can operate our group phone system to
change display view according their need. There are the following feature for MC-30: direct view,
high definition, huge characteristic library and English and Chinese Capability, simple operation and
beautiful outline and so on.
We’ll update MC-30 function according market status and won’t make any notice in advance.
Our company reserve revising copyright.
II. Technical Parameter
MC-30
1. Weight: 0.9 kg
2. Dimension: 219 mm x 178 mm x 110 mm( L x W x H )
3. The Max. Connection Line length: <100M
4. Dimension at wall installation: the distance between the two terminal is 83.5mm.
The configuration of Ear Phone: with Micro-phone, resistance :100Ω,
III Function Key
CHK/CLR
To enter into system program mode/ delete the data or return to normal mode.
TH/TL KEY
For navigating caller ID numbers and checking 50 groups number in unit .
PAGE Key
For paging external loud speaker and key phones.
CONF Key
For making a conference call.
↑↓Key
For adjusting the volume of speaker, handset, earphone and ring.
SPK. Key
For hand free talking.
MUTE Key
3
For muting (including handset talking, earphone talking and hand free talking ) during conversation
4
when the lamp lights.
And for switching to answer automatically in hook-on status when the lamp lights.
TRFR Key
For transferring incoming call to another Extension .System can switch to night service mode
when the key is pressed in hook-on status. The function can be realized by the key phone connected on port No.
001.
ICM Key
For making an internal call.
LINE Key
To select a CO Line.
REDIAL Key
For redialing a number. 3
FLASH Key
For ending a talking without hanging up.
FW/DND Key
For forward calls if the lamp is on or do not disturb if the lamp flashes.
HOLD Key
For confirming program revised and holding a CO line during a conversation, or save the program.
Incoming Call Light
Adopting big lamp to indicate visibly an incoming call so that you can know which phone is ringing,
whenever you are under noise environment or far from the phone.
LCD
Adopting STN display module with two rows and 30 characters. LCD Adopting STN display
module with two rows and 30 characters. Date, time, extension number, call status, conversation
time, information of incoming calls, program status can be displayed.
Direct Selection Key
For calling extension and outside line directly and monitoring extension status. No.1-16 are two
color LEDs red /green, No. 25-32 are single color LEDs（red）.And No.1-32 can be set for CO line
ports, extension ports, outside call numbers.
You can make a outside call, intercom, transfer or pick up a call at another extension, and so on by
one-touch dialing.
CHECK、CLEAR Key
For system programming and key programming.
5
IV. Operation Instruction
All below operation is based on CO Line Dialing tone when off-hook:
Function Operate Code
Intercom Call ICM +ext. number
Dial Outside Off-hook + CO line number
Call Transfer DRFR + ext. + on-hook
Call on hold HOLD
By local ext: ICM + “44”
By Desired ext: ICM + “4” + ext.
Retrieve a call
on holding
By Assigned ext: ICM + “3” + CO line port number
Pickup a Call ICM + “50”
Pickup directly ICM + “5” + ringing ext.
Auto-call back on busy (CO) Press “6” when CO line busy
Auto-call back on busy (EXT) Press “6” when ext. busy
Walking COS ICM + “** password ” + “9” + “CO Line number”
Day/night service Press TRFR when free (at 001 port only)
Call Interrupt ICM + “3” + CO Line port number + “1”
Call Break ICM + ext. number + “*”
Forward immediately: ICM + “71” + ext + “1” #
Forward on busy: ICM + “71” + ext + “2” #
Forward on no-answer: ICM + “71” + ext + “3” #
Call Forwarding
Forward on busy and no-answer : ICM + “71” + ext + “4” #
Do Not Disturb Press FWDND when free
Cancel DND or Forwarding ICM + “70” #
Set : ICM + “730#”
Auto-IP Route
Cancel: ICM + “731#”
Set: ICM + “722” + “4-digit password” #
EXT Blocking Password
Cancel: ICM + “723” + “4-digit password” #
Set: ICM + “762” + ext.+ #
Hotline dialing
Cancel: ICM + “760”#
8
6
How to program keys?
1.CO Line port setting: press CHK twice, EXT PROG MODE, press desired key, then press “1”,
LINEX, then input 2-digits CO line series number, press HOLD and CLR ,exit.
2. EXT port setting: press CHK twice, EXT PROG MODE, press desired key, then press “2”, PORT
XXX EXT XXXX, then then input 3-digits EXT port number, press HOLD and CLR ,exit.
3. CO line number setting: press CHK twice, EXT PROG MODE, press desired key, then press
“3”,LINE NUMBER, press “9”+ CO Line number, press HOLD and CLR ,exit.(unavailable for
MC-832KB)
Indice
Altri manuali Miracall Technology Telefono
