Mircom TX3-TOUCH-S15B-WR Istruzioni operative e di sicurezza
LT-6656 Rev 1 Page 1 of 3
Replacement Display for
TX3-TOUCH-S15B-WR and
TX3-TOUCH-S15S-WR
A. Shut down the Touch Screen
1. Press the On/Off switch located at the bottom of the
inner chassis.
2. After the TX3 Configurator and Windows have finished
shutting down, disconnect power from the Touch
Screen.
Remove the old display
1. Disconnect the cables from the current display.
2. Unscrew the 8 nuts that hold the display assembly to the door. See Figure 1.
Figure 1 Display on door (back view)
3. Unscrew the 8 screws that hold the 4 brackets to the display. See Figure 2.
On/Off Switch
4 nuts
4 nuts
Display
assembly
Door
LT-6656 Rev 1 Page 2 of 3
Attach the new display
1. Secure the new display to the brackets with the 8 screws. See Figure 2.
Figure 2 Display assembly (back view)
Figure 3 Display assembly from above
Figure 4 Display assembly side view
display
bracket
8 screws
bracket
bracket
bracket
Included screws
Front
Back
Included screws
Front Back
LT-6656 Rev 1 Page 3 of 3
2. Attach the new display to the door with the 8 nuts. See Figure 5.
Figure 5 Display on door (back view)
1. Connect all the cables to the new display.
2. Turn on the Touch Screen.
You are done! If you need more help, call us at 1-888-660-4655.
4 nuts
4 nuts
Display
assembly
Door
Altri manuali per TX3-TOUCH-S15B-WR
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Mircom Monitor
