Mirrorstone MS-THC-12JB Manuale utente
HELIOS BAR HEATER MANUAL
MS-THC-12JB / MS-THC-18JB
MS-THC- 24JB / MS-THC-30JB
MS-THC-12JW / MS-THC-18JW
MS-THC-24JW / MS-THC-30JW
MS-THC-12DBW / MS-THC-18DBW
MS-THC- 24DBW / MS-THC-30DBW
MS-THC-12DWW / MS-THC-18DWW
MS-THC-24DWW / MS-THC-30DWW
1. BEFORE USING YOUR HEATER FOR THE FIRST TIME
2. IMPORTANT SAFEGAURDS
3. INSTALLATION GUIDE
4. PRODUCT INSTRUCTION FOR HELIOS NON- REMOTE HEATERS
5. PRODUCT INSTRUCTION FOR HELIOS REMOTE CONTROLLABLE HEATERS
6.
7. 7DAY TIMER
8. WARNING
3
3
6
9
11
14
15
18
CONTENTS
PAIRING YOUR REMOTE CONTROL HELIOS BAR HEATER TO YOUR WIFI
NETWORK
Please read all the instructions in this manual carefully, even if you have prior experience of
using an infrared heater. This manual should be kept in a safe place for future reference.
Should you need to make any kind of warranty claim with the manufacturer, you will need to
make note of the complete model number (located on the product card at the back of the
heater), the date on which you received the product, and your receipt of purchase. The
various ratings listed on the product card are based on specific loading tests performed in a
controlled environment. Normal usage or use with other electrical equipment may result in
different ratings.
Upon switching the heater on for the first time. you may notice a distinct smell and light
smog. Please be aware that this is completely normal - this is simply the protective oils used
on the element to protect it during production and transport burning off. Once the heater
has been on in an open environment, any smell or smog will disappear over a short period
of time.
Please abide by the following safety precautions when using the heater, in order to mini-
mise the risk of fire, electrical shock, injury or property damage:
Please read all the instructions in this manual carefully, and keep it in a safe place for
future reference.
Use only the voltage specified on the product card located at the back of the heater.
Do not obstruct the front of the heater, or block the entry or exit of any airflow. There
should be a clearance of at least 1 meter around the front and sides of the heater.
Do not use the product in close proximity to any other radiant heat source.
Do not use the product in close proximity to gasoline, paint or any other highly flammable
liquids.
Take extra care to ensure that the heater has been off for at least 1 hour before touching
it with bare skin or moving it to another location.
Keep the heater away from all kinds of liquid, ensuring that it does not become immersed
in any liquid, as this could create an electric shock.
Do not use the heater if the plug, power cord, or connectors become damaged in any way.
In the event of such an occurrence, please return the heater to a qualified electrician for
examination, adjustment, service or repair.
Do not touch the appliance with wet hands.
•
•
•
•
•
•
•
•
•
•
3
BEFORE USING YOUR HEATER FOR THE FIRST TIME
IMPORTANT SAFEGUARDS
4
The most common cause of overheating is dust or fluff deposits getting stuck in the
heater. You can prolong the life and ensure the safety of your heater by disconnecting it
regularly and vacuum cleaning the air vents and grilles.
Ensure that the product is installed away from windows as any rain may cause an
electrical shock.
When cleaning the heater, only use a soft, damp cloth, and always ensure that the heater
has been disconnected from the mains before cleaning. Do not use an abrasive cleaning
cloth.
Do not connect to the mains supply until the heater has been completely installed.
Do not use the heater in the immediate vicinity of any baths, showers, swimming pools, or
any other areas where there is an exceptionally large concentration of water.
Please let the surface of the heater cool down before moving it.
Do not tamper with the power cord while the heater is on.
Using an extension cord with this product is not recommended.
Please ensure that the power cord is disconnected when the heater is not on.
This heater isn't suitable for use near long pile carpets or flokati rugs.
Do not allow the power cord to come into contact with the heater when it is on.
Do not leave the power cord loose around walkways or corridors, as this could be a
tripping hazard.
Do not twist, kink or wrap the cord around the heater, as this may cause the insulation to
weaken and split.
Do not store the heater away while it is still hot.
The heater is not to be used by young children, the elderly or the disabled without
supervision.
Do not install the heater directly above an electrical socket.
Do not use this heater with more than one programmer, timer, thermostat, or any other
device that switches the heater on and off automatically (including the built-in thermostat
on the remote controllable version).
The cover and casing are designed to protect the heating elements inside the heater, and
should not be tampered with or opened under any circumstances.
Please adhere to the safety precautions detailed in this manual, in order to prevent any
fire. electrical hazards or injuries.
The heater may be operated by children over the age of 8, those who suffer from reduced
physical, sensory or mental capabilities, provided they are supervised or complete under-
stand ing of the operational and general hazards involved with using the heater. Children
should not play with the heater, and should not carry out any cleaning or maintenance of
the heater.
Children younger than 8 should not use the heater in any capacity, whether they are
supervised or unsupervised.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The outer surface of the heater can get very hot and cause burns if contact is made with
the skin for prolonged periods of time. Please pay attention when children or vulnerable
people are present.
The heater should be installed at a minimum of 2.2 metres from the floor.
Should the power cord become damaged, it must be returned to the manufacturer, or be
repaired by a qualified electrician.
The heater should not be used in confined spaces with occupants who are unable to leave
the room on their own.
•
•
•
•
5
6
INSTALLATION GUIDE
Model
MS-THC-12DBW
MS-THC-12DWW
MS-THC-18DBW
MS-THC-18DWW
MS-THC-24DBW
MS-THC-24DWW
MS-THC-30DBW
MS-THC-30DWW
L (mm)
L1
L
940
1540
1840
1240
707
1307
1607
1007
L1 (mm)
These holes at the back of the bar heater are not
for the screws, they allow air to ow.
The brackets have a notch, the one with the
notch goes into the bar heater, without the
notch goes into the wall.
2x Brackets with notch 2x Brackets without
notch
Step One: Use the screws provided to install two of the brackets to the back of the heater,
as shown in Fig. A.
Step Two: Use the screws provided to install two of the brackets to the wall or ceiling, as
shown in Fig. B.
Step Three: Connect the brackets on the back of the heater to the brackets on the wall at
your desired angle, using the wing nuts provided to fix them, as shown in Fig. C.
7
For ceiling installation: the distance between the side of the heater and the wall should be at
least 100mm, as shown in Fig. 1.
For wall installations, the height from the floor should be at least 2.2 metres, as shown in
Fig.2.
200mm
> 2200mm
2
Ceiling
Wall
Floor
>100mm
>100mm
1
8
For suspended installation, the heater will hook up to the suspension cables and hang from
the ceiling, as shown in Fig. 3.
(Spare parts purchased separately)
A1 B1
3
PRODUCT INSTRUCTIONS FOR HELIOS NON-
REMOTE HEATERS
Outer Casing Heating Plate
Power Indicator
Heating plate
220-240VAC 50/60Hz
Control Box
Model
MS-THC-12JB
MS-THC-12JW
MS-THC-18JB
MS-THC-18JW
MS-THC-24JB
MS-THC-24JW
MS-THC-30JB
MS-THC-30JW
Power
1200W 940 150 65
65
65
65
150
150
150
1540
1840
12401800W
3000W
2400W
Length (mm) Width (mm) Height (mm)
Product Size
Circuit Diagram
9
Before first use, please read this manual carefully.
When removing the heater from the box, please take care to ensure that you do not
damage the heater, and that you retain the box for storage purposes.
Install the heater according to the instructions provided in this manual.
The heater should be connected to its own power supply, as it should not share a
circuit with other high-power appliances, otherwise the circuit may overload.
Upon connecting the heater to a power supply, the heater will switch on.
Please be aware that the front of the heater does get very hot when in operation, so
please take care to ensure you do not touch the heater when it is on.
1.
1.1.
1.2.
1.3.
2.
3.
10
Replacement of Power Cord
Should the power cord become damaged, it must be replaced by a qualified electrician
or the manufacturer.
Child Supervision
This heater is not intended for use by children or vulnerable people without
supervision.
4.
5.
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali Mirrorstone Stufa
Manuali Stufa popolari di altre marche
Empire Heating Systems
Empire Heating Systems WCC65 Manuale utente
Wetekom
Wetekom 92 86 43 Manuale utente
Desa
Desa SPC170-F Manuale utente
Watlow
Watlow Watrod Electric Tubular Heaters Manuale utente
Haverland
Haverland ECO-DRY GPS Series Manuale elenco delle parti
Stelpro
Stelpro ASILVC2060 Series Manuale utente