Setting up:
How to use:
BASIC mode:
1. Turn dial 2 to ‘BASIC’.
2. Control fan speed with dial 1.
BASIC mode:
LOGIC mode:
Plug LogicFan™ Temperature Controller
into mains socket.
1Plug fan into the socket of LogicFan™
Temperature Controller.
2
Position Temperature Sensor inside
room, taking care to avoid places where
it may take a false reading, such as
directly under lights, or in front of fan.
3Switch on at mains.
4
EN
LOGIC mode:
1. Set minimum fan speed on dial 1. Fan will
work between set minimum and full speed.
2. Turn dial 2 to target temperature.
3. Switch on at mains.
4. Controller will enter a short period of
calibration. During this time, fan may pulse
up and down. After approximately 5
minutes, fans will find the right speed.
Dial 1
(Fan Speed)
Dial 2
(Temperature)
