Mitsubishi Electric CITY MULTI PUHY-P108 Come usare

Models PUHY-P72, P96, P108, P126, P144TGMU-A

PUHY-P168, P192, P204, P216, P234TGMU-A

PURY-P72, P96, P108, P126, P144TGMU-A

PURY-P168, P192, P204, P216, P234TGMU-A

Service Handbook

AIR CONDITIONERS CITY MULTI

HEAD OFFICE: MITSUBISHI DENKI BLDG., 2-2-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN

Service Handbook PUHY-P72, P96, P108, P126, P144TGMU-A

PUHY-P168, P192, P204, P216, P234TGMU-A

PURY-P72, P96, P108, P126, P144TGMU-A

PURY-P168, P192, P204, P216, P234TGMU-A

Issued in Oct. 2005 HWE05020

New publication effective Oct. 2005.

Specifications subject to change without notice.

Service Handbook PURY-P72, P96, P108, P126, P144,P168, P192, P204, P216, P234TGMU-A

PUHY-P72, P96, P108, P126, P144,P168, P192, P204, P216, P234TGMU-A

Safety Precautions

Before installing the unit, thoroughly read the following safety precautions.

Observe these safety precautions for your safety.

WARNING

This symbol is intended to alert the user to the presence of important instructions that must be followed to avoid

the risk of serious injury or death.

CAUTION

This symbol is intended to alert the user to the presence of important instructions that must be followed to avoid

the risk of serious injury or damage to the unit.

After reading this manual, give it to the user to retain for future reference.

Keep this manual for easy reference. When the unit is moved or repaired, give this manual to those who provide these ser-

vices.

When the user changes, make sure that the new user receives this manual.

WARNING

Ask your dealer or a qualified technician to install the

unit.

Improper installation by the user may result in water leak-

age, electric shock, smoke, and/or fire.

Properly install the unit on a surface that can withstand

the weight of the unit.

Unit installed on an unstable surface may fall and cause in-

jury.

Only use specified cables. Securely connect each ca-

ble so that the terminals do not carry the weight of the

cable.

Improperly connected or fixed cables may produce heat

and start a fire.

Take appropriate safety measures against strong

winds and earthquakes to prevent the unit from falling.

If the unit is not installed properly, the unit may fall and

cause serious injury to the person or damage to the unit.

Do not make any modifications or alterations to the

unit. Consult your dealer for repair.

Improper repair may result in water leakage, electric shock,

smoke, and/or fire.

Do not touch the heat exchanger fins.

The fins are sharp and dangerous.

In the event of a refrigerant leak, thoroughly ventilate

the room.

If refrigerant gas leaks and comes in contact with an open

flame, poisonous gases will be produced.

When installing the All-Fresh type units, take it into

consideration that the outside air may be discharged

directly into the room when the thermo is turned off.

Direct exposure to outdoor air may have an adverse effect

on health. It may also result in food spoilage.

Properly install the unit according to the instructions in

the installation manual.

Improper installation may result in water leakage, electric

shock, smoke, and/or fire.

Have all electrical work performed by an authorized

electrician according to the local regulations and in-

structions in this manual, and a dedicated circuit must

be used.

Insufficient capacity of the power supply circuit or improper

installation may result in malfunctions of the unit, electric

shock, smoke, and/or fire.

WARNING

Securely attach the terminal block cover (panel) to the

unit.

If the terminal block cover (panel) is not installed properly,

dust and/or water may infiltrate and pose a risk of electric

shock, smoke, and/or fire.

Only use the type of refrigerant that is indicated on the

unit when installing or reinstalling the unit.

Infiltration of any other type of refrigerant or air into the unit

may adversely affect the refrigerant cycle and may cause

the pipes to burst or explode.

When installing the unit in a small room, exercise cau-

tion and take measures against leaked refrigerant

reaching the limiting concentration.

Consult your dealer with any questions regarding limiting

concentrations and for precautionary measures before in-

stalling the unit. Leaked refrigerant gas exceeding the lim-

iting concentration causes oxygen deficiency.

Consult your dealer or a specialist when moving or re-

installing the unit.

Improper installation may result in water leakage, electric

shock, and/or fire.

After completing the service work, check for a gas leak.

If leaked refrigerant is exposed to a heat source, such as a

fan heater, stove, or electric grill, poisonous gases may be

produced.

Do not try to defeat the safety features of the unit.

Forced operation of the pressure switch or the temperature

switch by defeating the safety features of these devices, or

the use of accessories other than the ones that are recom-

mended by MITSUBISHI may result in smoke, fire, and/or

explosion.

Only use accessories recommended by MITSUBISHI.

Ask a qualified technician to install the unit. Improper instal-

lation by the user may result in water leakage, electric

shock, smoke, and/or fire.

Precautions for handling units for use with R410A

CAUTION

Do not use the existing refrigerant piping.

A large amount of chlorine that may be contained in the re-

sidual refrigerant and refrigerating machine oil in the exist-

ing piping may cause the refrigerating machine oil in the

new unit to deteriorate.

R410A is a high-pressure refrigerant and can cause the

existing pipes to burst.

Use refrigerant pipes made of phosphorus deoxidized

copper. Keep the inner and outer surfaces of the pipes

clean and free of such contaminants as sulfur, oxides,

dust, dirt, shaving particles, oil, and water.

These types of contaminants inside the refrigerant pipes

may cause the refrigerant oil to deteriorate.

Store the pipes to be installed indoors, and keep both

ends of the pipes sealed until immediately before braz-

ing. (Keep elbows and other joints wrapped in plastic.)

Infiltration of dust, dirt, or water into the refrigerant system

may cause the refrigerating machine oil to deteriorate or

cause the unit to malfunction.

Use a small amount of ester oil, ether oil, or alkylben-

zene to coat flares and flanges.

Infiltration of a large amount of mineral oil may cause the re-

frigerating machine oil to deteriorate.

Charge liquid refrigerant (as opposed to gaseous re-

frigerant) into the system.

If gaseous refrigerant is charged into the system, the com-

position of the refrigerant in the cylinder will change and

may result in performance loss.

Use a vacuum pump with a reverse-flow check valve.

If a vacuum pump that is not equipped with a reverse-flow

check valve is used, the vacuum pump oil may flow into the

refrigerant cycle and cause the refrigerating machine oil to

deteriorate.

Prepare tools for exclusive use with R410A. Do not use

the following tools if they have been used with the con-

ventional refrigerant (gauge manifold, charging hose,

gas leak detector, reverse-flow check valve, refrigerant

charge base, vacuum gauge, and refrigerant recovery

equipment.).

If the refrigerant or the refrigerating machine oil left on

these tools are mixed in with R410A, it may cause the re-

frigerating machine oil to deteriorate.

Infiltration of water may cause the refrigerating machine oil

to deteriorate.

Gas leak detectors for conventional refrigerants will not de-

tect an R410A leak because R410A is free of chlorine.

Do not use a charging cylinder.

If a charging cylinder is used, the composition of the refrig-

erant will change, and the unit may experience power loss.

Exercise special care when handling the tools for use

with R410A.

Infiltration of dust, dirt, or water into the refrigerant system

may cause the refrigerating machine oil to deteriorate.

Only use refrigerant R410A.

The use of other types of refrigerant that contain chlorine

(i.e. R22) may cause the refrigerating machine oil to deteri-

orate.

Before installing the unit

WARNING

Do not install the unit where a gas leak may occur.

If gaseous refrigerant leaks and piles up around the unit, it

may be ignited.

Do not use the unit to keep food items, animals, plants,

artifacts, or for other special purposes.

The unit is not designed to preserve food products.

Do not use the unit in an unusual environment.

Do not install the unit where a large amount of oil or steam

is present or where acidic or alkaline solutions or chemical

sprays are used frequently. Doing so may lead to a remark-

able drop in performance, electric shock, malfunctions,

smoke, and/or fire.

The presence of organic solvents or corrosive gas (i.e. am-

monia, sulfur compounds, and acid) may cause gas leak-

age or water leakage.

When installing the unit in a hospital, take appropriate

measures to reduce noise interference.

High-frequency medical equipment may interfere with the

normal operation of the air conditioner or vice versa.

Do not install the unit on or over things that cannot get

wet.

When the humidity level exceeds 80% or if the drainage

system is clogged, the indoor unit may drip water. Drain wa-

ter is also discharged from the outdoor unit. Install a central-

ized drainage system if necessary.

Before installing the unit (moving and reinstalling the unit) and performing electrical

work

WARNING

When installing or relocating the unit, make sure that

no substance other than the specified refrigerant

(R410A) enters the refrigerant circuit.

Any presence of foreign substance such as air can cause

abnormal pressure rise or explosion.

CAUTION

Properly ground the unit.

Do not connect the grounding wire to a gas pipe, water pipe,

lightning rod, or grounding wire from a telephone pole. Im-

proper grounding may result in electric shock, smoke, fire,

and/or malfunction due to noise interference.

Do not put tension on the power supply wires.

If tension is put on the wires, they may break and result in

excessive heat, smoke, and/or fire.

Install an earth leakage breaker to avoid the risk of elec-

tric shock.

Failure to install an earth leakage breaker may result in

electric shock, smoke, and/or fire.

Use the kind of power supply wires that are specified in

the installation manual.

The use of wrong kind of power supply wires may result in

current leak, electric shock, and/or fire.

Use breakers and fuses (current breaker, remote switch

<switch + Type-B fuse>, moulded case circuit breaker)

with the proper current capacity.

The use of wrong capacity fuses, steel wires, or copper

wires may result in malfunctions, smoke, and/or fire.

Do not spray water on the air conditioner or immerse

the air conditioner in water.

Otherwise, electric shock and/or fire may result.

Periodically check the installation base for damage.

If the unit is left on a damaged platform, it may fall and

cause injury.

Properly install the drain pipes according to the in-

structions in the installation manual. Keep them insu-

lated to avoid dew condensation.

Improper plumbing work may result in water leakage and

damage to the furnishings.

Exercise caution when transporting products.

Products weighing more than 20 kg should not be carried

alone.

Do not carry the product by the PP bands that are used on

some products.

Do not touch the heat exchanger fins. They are sharp and

dangerous.

When lifting the unit with a crane, secure all four corners to

prevent the unit from falling.

Properly dispose of the packing materials.

Nails and wood pieces in the package may pose a risk of

injury.

Plastic bags may pose a risk of choking hazard to children.

Tear plastic bags into pieces before disposing of them.

Before the test run

CAUTION

Turn on the unit at least 12 hours before the test run.

Keep the unit turned on throughout the season. If the unit is

turned off in the middle of a season, it may result in malfunc-

tions.

To avoid the risk of electric shock or malfunction of the

unit, do not operate switches with wet hands.

Do not touch the refrigerant pipes with bare hands dur-

ing and immediately after operation.

During or immediately after operation, certain parts of the

unit such as pipes and compressor may be either very cold

or hot, depending on the state of the refrigerant in the unit

at the time. To reduce the risk of frost bites and burns, do

not touch these parts with bare hands.

Do not operate the unit without panels and safety

guards.

Rotating, high-temperature, or high-voltage parts on the unit

pose a risk of burns and/or electric shock.

Do not turn off the power immediately after stopping

the operation.

Keep the unit on for at least five minutes before turning off

the power to prevent water leakage or malfunction.

Do not operate the unit without the air filter.

Dust particles may build up in the system and cause mal-

functions.

CONTENTS

I Read Before Servicing

[1] Read Before Servicing............................................................................................................ 3

[2] Necessary Tools and Materials .............................................................................................. 4

[3] Piping Materials...................................................................................................................... 5

[4] Storage of Piping.................................................................................................................... 7

[5] Pipe Processing...................................................................................................................... 7

[6] Brazing ................................................................................................................................... 8

[7] Air Tightness Test................................................................................................................... 9

[8] Vacuum Drying (Evacuation)................................................................................................ 10

[9] Refrigerant Charging ............................................................................................................ 11

[10] Remedies to be taken in case of a Refrigerant Leak............................................................ 11

[11] Characteristics of the Conventional and the New Refrigerants ............................................ 12

[12] Notes on Refrigerating Machine Oil...................................................................................... 13

II Restrictions

[1] Types and Maximum allowable Length of Cables................................................................ 17

[2] Switch Settings and Address Settings.................................................................................. 18

[3] Sample System Connection ................................................................................................. 23

[4] An Example of a System to which an MA Remote Controller is connected ......................... 24

[5] An Example of a System to which an M-NET Remote Controller is connected ................... 46

[6] An Example of a System to which both MA Remote Controller and M-NET Remote

Controller are connected ......................................................................................................50

[7] Restrictions on Pipe Length.................................................................................................. 53

III Outdoor Unit / BC Controller Components

[1] Outdoor Unit Components and Refrigerant Circuit............................................................... 67

[2] Control Box of the Outdoor Unit ........................................................................................... 79

[3] Outdoor Unit Circuit Board ................................................................................................... 81

[4] BC Controller (Under the panel) ........................................................................................... 86

[5] Control Box of the BC Controller .......................................................................................... 88

[6] BC Controller Circuit Board .................................................................................................. 89

IV Remote Controller

[1] Functions and Specifications of MA and ME Remote Controllers ........................................ 93

[2] Group Settings and Interlock Settings via the ME Remote Controller.................................. 94

[3] Interlock Settings via the MA Remote Controller.................................................................. 98

[4] Using the built-in Temperature Sensor on the Remote Controller...................................... 101

V Electrical Wiring Diagram

[1] Electrical Wiring Diagram of the Outdoor Unit.................................................................... 105

[2] Electrical Wiring Diagram of the BC Controller................................................................... 109

VI Refrigerant Circuit

[1] Refrigerant Circuit Figure ................................................................................................... 119

[2] Principal Parts and Functions............................................................................................. 126

VII Control

[1] Functions and Factory Settings of the Dipswitches............................................................ 139

[2] Controlling the Outdoor Unit............................................................................................... 148

[3] Controlling BC Controller.................................................................................................... 164

[4] Operation Flow Chart ......................................................................................................... 165

VIII Test Run Mode

[1] Items to be checked before a Test Run.............................................................................. 179

[2] Test Run Method................................................................................................................ 180

[3] Operating Characteristic and Refrigerant Amount.............................................................. 181

[4] Adjusting the Refrigerant Amount....................................................................................... 182

[5] Refrigerant Amount Adjust Mode ....................................................................................... 187

[6] The following symptoms are normal................................................................................... 191

[7] Standard Operation Data (Reference Data) ....................................................................... 192

CONTENTS

IX Troubleshooting

[1] Check Code Lists................................................................................................................ 235

[2] Responding to Error Display on the Remote Controller...................................................... 239

[3] Investigation of Transmission Wave Shape/Noise ............................................................. 314

[4] Troubleshooting Principal Parts.......................................................................................... 317

[5] Refrigerant Leak ................................................................................................................. 350

[6] Compressor Replacement Instructions (only P168-P234 types) ........................................ 351

[7] Collecting the Cooling Liquid from the Accumulator (Only P168-P234 types).................... 353

[8] Servicing the BC controller ................................................................................................. 354

X LED monitor display on the outdoor unit board

[1] How to read the LED on the service monitor ...................................................................... 361

- 1 -

I Read Before Servicing

[1] Read Before Servicing.......................................................................................................3

[2] Necessary Tools and Materials .........................................................................................4

[3] Piping Materials ................................................................................................................. 5

[4] Storage of Piping ............................................................................................................... 7

[5] Pipe Processing................................................................................................................. 7

[6] Brazing............................................................................................................................... 8

[7] Air Tightness Test.............................................................................................................. 9

[8] Vacuum Drying (Evacuation) ........................................................................................... 10

[9] Refrigerant Charging ....................................................................................................... 11

[10] Remedies to be taken in case of a Refrigerant Leak....................................................... 11

[11] Characteristics of the Conventional and the New Refrigerants ....................................... 12

[12] Notes on Refrigerating Machine Oil................................................................................. 13

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Mitsubishi Electric Condizionatore d'aria

Mitsubishi Electric

Mitsubishi Electric PUHZ-P-VHA2 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-AY25VGK Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr.Slim MSH24WN Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-AP60VG Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-YG21CDA Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr. Slim MSZ-GE18NA Manuale di installazione e d'uso

Mitsubishi Electric

Mitsubishi Electric City Multi PURY-M200YNW-A1 Come usare

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PKFY-P NLMU Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr.SLIM PUHZ-RP1.6VHA Manuale operativo

Mitsubishi Electric

Mitsubishi Electric PU-P200YKA3 Manuale utente

Mitsubishi Electric

Mitsubishi Electric CITY MULTI TPKFYP BM142 Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PFFY-WL20VCM-A Manuale utente

Mitsubishi Electric

Mitsubishi Electric PFFY-P20VKM-E Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-GS06NA Manuale utente

Mitsubishi Electric

Mitsubishi Electric PEH-P8MYA Manuale utente

Mitsubishi Electric

Mitsubishi Electric PEH-P400MYA Manuale operativo

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PEFY-P-VMA3-E Guida del prodotto

Mitsubishi Electric

Mitsubishi Electric MSZ-AP22VGD Manuale utente

Mitsubishi Electric

Mitsubishi Electric PUMY-P200YKM Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr. Slim MSZ-FE12NA Manuale utente

Mitsubishi Electric

Mitsubishi Electric PKFY-P63VFM-E Manuale operativo

Mitsubishi Electric

Mitsubishi Electric Mr.Slim PUZ-HA NHA2 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MS-GJ12VA Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr. Slim PUHZ-RP71VHA4 Manuale utente

Manuali Condizionatore d'aria popolari di altre marche

Spheros

Spheros CC 355 Manuale utente

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuale utente

Panasonic

Panasonic CS-E12HKEW Manuale utente

nedis

nedis ACMB1WT7 Manuale utente

Samsung

Samsung AR KV Series Guida

Daikin

Daikin FCFV50A Manuale utente

Fujitsu

Fujitsu Inverter ASBA30JFC Manuale utente

Toshiba

Toshiba RAS-M10SMUV-E Manuale utente

Daikin

Daikin FXLQ20MAVE Manuale utente

Hitachi

Hitachi RAS-E24CAK Manuale utente

CIAT

CIAT Magister 2 Series Guida

Bestron

Bestron AAC6000 Manuale utente

Hisense

Hisense 7K Manuale tecnico

Frigidaire

Frigidaire FFRE0533S1E0 Manuale utente

Samsung

Samsung AS09HM3N Manuale utente

Frigidaire

Frigidaire CRA073PU11 Manuale del proprietario

Soleus Air

Soleus Air GB-PAC-08E4 Manuale utente

McQuay

McQuay MCK020A Manuale utente