Mitsubishi Electric PLFY-P32VBM-ER2.UK Manuale operativo

TECHNICAL & SERVICE MANUAL

Indoor unit

[Model names] [Service Ref.]

PLFY-P32VBM-E

PLFY-P40VBM-E

PLFY-P50VBM-E

PLFY-P63VBM-E

PLFY-P80VBM-E

PLFY-P100VBM-E

PLFY-P125VBM-E

No. OCH413

REVISED EDITION-D

CONTENTS

1. TECHNICAL CHANGES.........................2

2. SAFETY PRECAUTION..........................

3. PART NAMES AND FUNCTIONS..........5

4. SPECIFICATIONS.................................13

5. 4-WAY AIR FLOW SYSTEM.................

6. OUTLINES AND DIMENSIONS............21

7. WIRING DIAGRAM...............................22

REFRIGERANT SYSTEM DIAGRAM......

9. TROUBLESHOOTING..........................25

10. SPECIAL FUNCTION...........................34

11. DISASSEMBLY PROCEDURE.............41

SPLIT-TYPE, HEAT PUMP AIR CONDITIONERS

PLFY-P32VBM-E.UK

PLFY-P32VBM-ER2.UK

PLFY-P40VBM-E.UK

PLFY-P40VBM-ER2.UK

PLFY-P50VBM-E.UK

PLFY-P50VBM-ER2.UK

PLFY-P63VBM-E.UK

PLFY-P63VBM-ER2.UK

PLFY-P80VBM-E.UK

PLFY-P80VBM-ER2.UK

PLFY-P100VBM-E.UK

PLFY-P100VBM-ER3.UK

PLFY-P125VBM-E.UK

PLFY-P125VBM-ER3.UK

Note:

• This manual does not cover

outdoor units.

When servicing them, please

refer to the outdoor unit’s

service manual.

• RoHS compliant products

have <G> mark on the spec

name plate.

December 2012

INDOOR UNIT

Model name

indication

PARTS CATALOG (OCB413)

Revision:

• PLFY-P32/40/50/63/80/

100/125VBM-ER3 have

been added in REVISED

EDITION-D.

• Some descriptions have

been modified.

• Please void OCH413

REVISED EDITION-C.

PLFY-P32VBM-E1.UK

PLFY-P32VBM-ER3.UK

PLFY-P40VBM-E1.UK

PLFY-P40VBM-ER3.UK

PLFY-P50VBM-E1.UK

PLFY-P50VBM-ER3.UK

PLFY-P63VBM-E1.UK

PLFY-P63VBM-ER3.UK

PLFY-P80VBM-E1.UK

PLFY-P80VBM-ER3.UK

PLFY-P100VBM-ER2.UK

PLFY-P125VBM-ER2.UK

1TECHNICAL CHANGES

PLFY-P32VBM-E.UK PLFY-P32VBM-E1.UK

PLFY-P40VBM-E.UK PLFY-P40VBM-E1.UK

PLFY-P50VBM-E.UK PLFY-P50VBM-E1.UK

PLFY-P63VBM-E.UK PLFY-P63VBM-E1.UK

PLFY-P80VBM-E.UK PLFY-P80VBM-E1.UK

FAN MOTOR (MF) has been changed.

TURBO FAN, NUT and WASHER have been changed.

PLFY-P32VBM-E1.UK PLFY-P32VBM-ER2.UK

PLFY-P40VBM-E1.UK PLFY-P40VBM-ER2.UK

PLFY-P50VBM-E1.UK PLFY-P50VBM-ER2.UK

PLFY-P63VBM-E1.UK PLFY-P63VBM-ER2.UK

PLFY-P80VBM-E1.UK PLFY-P80VBM-ER2.UK

PLFY-P100VBM-E.UK PLFY-P100VBM-ER2.UK

PLFY-P125VBM-E.UK PLFY-P125VBM-ER2.UK

INDOOR CONTROLLER BOARD (I.B) has been changed. (S/W version up)

PLP-6BAJ (Automatic filter elevation panel, option)

The controller board (U.B) has been changed. (only for the panel but not for the service part)

PLFY-P32VBM-ER2.UK PLFY-P32VBM-ER3.UK

PLFY-P40VBM-ER2.UK PLFY-P40VBM-ER3.UK

PLFY-P50VBM-ER2.UK PLFY-P50VBM-ER3.UK

PLFY-P63VBM-ER2.UK PLFY-P63VBM-ER3.UK

PLFY-P80VBM-ER2.UK PLFY-P80VBM-ER3.UK

PLFY-P100VBM-ER2.UK PLFY-P100VBM-ER3.UK

PLFY-P125VBM-ER2.UK PLFY-P125VBM-ER3.UK

INDOOR CONTROLLER BOARD (I.B) has been changed. (S/W version up)

OCH413D

Cautions for units utilizing refrigerant R410A

Charge refrigerant from liquid phase of gas

cylinder.

If the refrigerant is charged from gas phase, composition

change may occur in refrigerant and the efficiency will be

lowered.

Do not use refrigerant other than R410A.

If other refrigerant (R22 etc.) is used, chlorine in refrige-

rant can cause deterioration of refrigerant oil etc.

Use a vacuum pump with a reverse flow check

valve.

Vacuum pump oil may flow back into refrigerant cycle and

that can cause deterioration of refrigerant oil etc.

Use the following tools specifically designed for

use with R410A refrigerant.

The following tools are necessary to use R410A refrigerant.

Handle tools with care.

If dirt, dust or moisture enters into refrigerant cycle, that can

cause deterioration of refrigerant oil or malfunction of com-

pressor.

Do not use a charging cylinder.

If a charging cylinder is used, the composition of refrigera-

nt will change and the efficiency will be lowered.

Flare tool

Electronic refrigerant

charging scale

Vacuum pump adaptor

Size adjustment gauge

Gauge manifold

Torque wrench

Gas leak detector

Charge hose

Tools for R410A

If dirt, dust or moisture enters into refrigerant cycle, that can

cause deterioration of refrigerant oil or malfunction of com-

pressor.

If large amount of mineral oil enters, that can cause deterio-

ration of refrigerant oil etc.

Do not use the existing refrigerant piping.

The old refrigerant and lubricant in the existing piping

contains a large amount of chlorine which may cause the

lubricant deterioration of the new unit.

Use “low residual oil piping”

If there is a large amount of residual oil (hydraulic oil, etc.)

inside the piping and joints, deterioration of the lubricant

will result.

Store the piping indoors, and both ends of the

piping sealed until just before brazing.

(Leave elbow joints, etc. in their packaging.)

The refrigerant oil applied to flare and flange

connections must be ester oil, ether oil or

alkylbenzene oil in a small amount.

Ventilate the room if refrigerant leaks during

operation. If refrigerant comes into contact with

a flame, poisonous gases will be released.

Never use any refrigerant other than that specified.

Doing so may cause a burst, an explosion, or fire when the

unit is being used, serviced, or disposed of.

Correct refrigerant is specified in the manuals and on the

spec labels provided with our products.

We will not be held responsible for mechanical failure,

system malfunction, unit breakdown or accidents caused

by failure to follow the instructions.

Use the specified refrigerant only.

2SAFETY PRECAUTION

OCH413D

[1] Cautions for service

(1) Perform service after recovering the refrigerant left in unit completely.

(2) Do not release refrigerant in the air.

(3) After completing service, charge the cycle with specified amount of refrigerant.

(4) When performing service, install a filter drier simultaneously.

Be sure to use a filter drier for new refrigerant.

[2] Additional refrigerant charge

When charging directly from cylinder

· Check that cylinder for R410A on the market is syphon type.

· Charging should be performed with the cylinder of syphon stood vertically. (Refrigerant is charged from liquid phase.)

Gravimeter

Unit

[3] Service tools

Use the below service tools as exclusive tools for R410A refrigerant.

No. Tool name Specifications

1Gauge manifold · Only for R410A

· Use the existing fitting specifications. (UNF1/2)

· Use high-tension side pressure of 5.3MPa·G or over.

2Charge hose · Only for R410A

· Use pressure performance of 5.09MPa·G or over.

3Electronic scale —

4Gas leak detector · Use the detector for R134a, R407C or R410A.

5Adaptor for reverse flow check · Attach on vacuum pump.

6Refrigerant charge base —

7Refrigerant cylinder · Only for R410A · Top of cylinder (Pink)

· Cylinder with syphon

8Refrigerant recovery equipment —

OCH413D

3PART NAMES AND FUNCTIONS

Drain pipe

Filter

Vane

Gas pipe

Liquid pipe

Air outlet

i-see sensor

(option)

Air intake

(Intake grille)

3-1. INDOOR UNIT

OCH413D

ON/OFF TEMP

FAN

VANE

TEST RUN

AUTO STOP

AUTO START

min

LOUVER

MODE

CHECK

RESETSET CLOCK

MODEL SELECT

NOTAVAILABLE

CHECK

TEST RUN

°C

AMPM

VANE CONTROL button

Used to change the air flow direction.

CLOCK button

RESET button

SET button

ON/OFF button

The unit is turned ON and OFF alternately

each time the button is pressed.

MODE SELECT button

Used to switch the operation mode between

cooling, drying, heating, auto and fan mode.

CHECK-TEST RUN buttons

Only press this button to perform an

inspection check or test operation.

Do not use it for normal operation.

FAN SPEED SELECT button

Used to change the fan speed.

TIMER display

Displays when in timer operation or when

setting timer.

buttons

SET TEMPERATURE button sets any desired

room temperature.

CLOCK display

Displays the current time.

“ ” “ ” display

Displays the order of timer operation.

“ ” “ ” display

Displays whether timer is on or off.

Buttons used to set the “hour and minute” of

the current time and timer settings.

h and min buttons

display

FAN SPEED display indicates which fan

speed has been selected.

display

The vertical direction of air flow is indicated.

display

Blinks when model is selected.

display

CHECK and TEST RUN display indicate that

the unit is being checked or test-run.

display

OPERATION MODE display

Operation mode display indicates which

operation mode is in effect.

AUTO STOP (OFF timer): when this switch

is set, the air conditioner will be

automatically stopped at the preset time.

AUTO START (ON timer): when this switch is

set, the air conditioner will be automatically

started at the preset time.

MODEL SELECT

CHECK

TEST RUN

LOUVER button

Changes left/right airflow direction.

(Not available for this model.)

SET TEMP. display indicates the desired

temperature which is set.

Lights up while the signal is transmitted to

the indoor unit when the button is pressed.

TIMER CONTROL buttons

3-2. WIRELESS REMOTE CONTROLLER

OCH413D

Function buttons

F1 F2 F3 F4

Press to turn ON/OFF the indoor unit.

ON / OFF button

When the backlight is off, pressing any button turns

the backlight on and does not perform its function.

(except for the (ON / OFF) button)

The functions of the function buttons change depending on

the screen. Refer to the button function guide that appears

at the bottom of the LCD for the functions they serve on a

given screen.

When the system is centrally controlled, the button function

guide that corresponds to the locked button will not appear.

Press to save the setting.

SELECT button

Press to return to the previous screen.

RETURN button

Press to bring up the Main menu.

MENU button

Operation settings will appear.

When the backlight is off, pressing any button turns the

backlight on and it will stay lit for a certain period of time

depending on the screen.

Backlit LCD

This lamp lights up in green while the unit is in operation.

It blinks while the remote controller is starting up or when

there is an error.

ON / OFF lamp

Main display : Press to change the operation mode.

Main menu : Press to move the cursor down.

Function button F1

Main display : Press to decrease temperature.

Main menu : Press to move the cursor up.

Function button F2

Main display : Press to increase temperature.

Main menu : Press to go to the previous page.

Function button F3

Main display : Press to change the fan speed.

Main menu : Press to go to the next page.

Function button F4

Fri

Room

Set temp.

Mode Temp. Fan

Cool Auto

Main

Main display:

Cursor Page

Main menu

Vane·Louver·Vent. (Lossnay)

High power

Timer

Weekly timer

OU silent mode

Function guide

3-3. WIRED REMOTE CONTROLLER <PAR-30MAA/PAR-31MAA>

* The functions which can be used are restricted according to the model. : Supported : Unsupported

Function PAR-30MAA/PAR-31MAA PAR-21MAA

Slim City multi

Body Product size H × W × D (mm) 120 × 120 × 19 120 × 130 × 19

LCD Full Dot LCD Partial Dot LCD

Backlight

Energy-saving Energy-saving operation schedule

Automatic return to the preset temperature

Restriction Setting the temperature range restriction

Function Operation lock function

Weekly timer

On / Off timer

High Power

Manual vane angle

Wired remote controller function

OCH413D

Fri

Mode Temp. Fan

Room

Cool Auto

Set temp.

Fri

Cool

Mode Temp. Fan

AutoSet temp.

The main display can be displayed in two different modes: "Full" and "Basic".

he factory setting is "Full". To switch to the "Basic" mode, change the setting on the Main display setting.

* All icons are displayed for explanation.

Most settings (except ON / OFF, mode, fan speed, temperature) can be made from the Menu screen.

Indoor unit operation mode appears here.

Operation mode

Preset temperature appears here.

Preset temperature

Current time appears here.

Clock (See the Installation Manual.)

Fan speed

Fan speed setting appears here.

Functions of the corresponding buttons appear here.

Button function guide

Appears when the ON/OFF operation is centrally controlled.

Appears when the operation mode is centrally controlled.

Appears when the preset temperature is centrally controlled.

Appears when the ﬁlter reset function is centrally controlled.

Indicates when ﬁlter needs maintenance.

Current room temperature appears here.

Room temperature

(See the Installation Manual.)

Appears when the buttons are locked.

Appears when the On/Off timer or Night setback function is

enabled.

Appears when the Weekly timer is enabled.

Appears while the units are operated in the energy-save

mode.

Appears when the built-in thermistor on the remote control-

ler is activated to monitor the room temperature (a).

appears when the thermistor on the indoor unit is acti-

vated to monitor the room temperature.

Indicates the vane setting.

Indicates the louver setting.

Indicates the ventilation setting.

Appears when the preset temperature range is restricted.

OCH413D

Not all functions are available on all models of indoor units.

Filter information

Error information

Energy saving

Auto return

Schedule

Night setback

Main menu Press the MENU button.

Move the cursor to the desired item with the F1 and F2 buttons, and press the SELECT button.

Vane · Louver · Vent. (Lossnay)

High power

Weekly timer

Restriction

Maintenance

Initial setting

On / Off timer

Auto-Off timer

Temp. range

Operation lock

Manual vane angle

Main / Sub

Timer

Main display

Contrast

Display details

Auto mode

Administrator password

Language selection

Service

Service menu

Input maintenance info.

Function setting

Lossnay (City Multi only)

Check

Self check

Maintenance password

Remote controller check

Test run

Clock

Drain pump test run

Auto descending panel

Menu structure

OCH413D

Setting and display items Setting details

Vane · Louver · Vent.

(Lossnay) Use to set the vane angle.

• Select a desired vane setting from ﬁve different settings.

Use to turn ON / OFF the louver.

• Select a desired setting from "ON" and "OFF."

Use to set the amount of ventilation.

• Select a desired setting from "Off," "Low," and "High."

High power Use to reach the comfortable room temperature quickly.

• Units can be operated in the High-power mode for up to 30 minutes.

Timer On/Off timer Use to set the operation On/Off times.

• Time can be set in 5-minute increments.

* Clock setting is required.

Auto-Off

timer Use to set the Auto-Off time.

• Time can be set to a value from 30 to 240 in 10-minute increments.

Filter information Use to check the ﬁlter status.

• The ﬁlter sign can be reset.

Error information Use to check error information when an error occurs.

• Error code, error source, refrigerant address, unit model, manufacturing number, contact

information (dealer's phone number) can be displayed.

* The unit model, manufacturing number, and contact information need to be registered in

advance to be displayed.

Weekly timer Use to set the weekly operation On / Off times.

• Up to eight operation patterns can be set for each day.

* Clock setting is required.

* Not valid when the On/Off timer is enabled.

Energy

saving Auto return Use to get the units to operate at the preset temperature after performing energy-save

operation for a speciﬁed time period.

• Time can be set to a value from 30 and 120 in 10-minute increments.

* This function will not be valid when the preset temperature ranges are restricted.

Schedule Set the start/stop times to operate the units in the energy-save mode for each day of the

week, and set the energy-saving rate.

• Up to four energy-save operation patterns can be set for each day.

• Time can be set in 5-minute increments.

• Energy-saving rate can be set to a value from 0% or 50 to 90% in 10% increments.

* Clock setting is required.

Night setback Use to make Night setback settings.

• Select "Yes" to enable the setting, and "No" to disable the setting. The temperature range and

the start/stop times can be set.

* Clock setting is required.

Restriction Temp. range Use to restrict the preset temperature range.

• Different temperature ranges can be set for different operation modes.

Operation

lock Use to lock selected functions.

• The locked functions cannot be operated.

Maintenance Auto

descending

panel

Auto descending panel (Optional parts) Up / Down you can do.

Manual

vane angle Use to set the vane angle for each vane to a ﬁxed position.

Initial setting Main/Sub When connecting two remote controllers, one of them needs to be designated as a sub

controller.

Clock Use to set the current time.

Main display Use to switch between "Full" and "Basic" modes for the Main display.

• The default setting is "Full."

Contrast Use to adjust screen contrast.

Main menu list

OCH413D

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Mitsubishi Electric Condizionatore d'aria

Mitsubishi Electric

Mitsubishi Electric MUZ-FH18NA Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr.Slim PUZ-A18NHA4 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-GE12NA-8 Manuale di installazione e d'uso

Mitsubishi Electric

Mitsubishi Electric MU-A08ND-c1 Manuale utente

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PUMY-P250YBM2 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-GL71VGD Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr. SLIM PU-1.6VLJA Manuale operativo

Mitsubishi Electric

Mitsubishi Electric PU-P71VHA 2.UK Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSY-GC71VA Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-D36NA Manuale utente

Mitsubishi Electric

Mitsubishi Electric PLFY-P32VKM-A Manuale operativo

Mitsubishi Electric

Mitsubishi Electric Mr.SLIM MS-SFF18VC Manuale utente

Mitsubishi Electric

Mitsubishi Electric MUZ-A09NA Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-FA25VA Manuale utente

Mitsubishi Electric

Mitsubishi Electric PLA-RP.BA Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PUMY-P200YKM2 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Mr.Slim PEAD-30 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSZ-EF18VGW Manuale utente

Mitsubishi Electric

Mitsubishi Electric PURY-RP200 Come usare

Mitsubishi Electric

Mitsubishi Electric M Z-C NA Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric PUZ-A-NHA3 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MSD-CF09VB-H1 Manuale utente

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PLFY-P12NBMU-E Manuale operativo

Mitsubishi Electric

Mitsubishi Electric Mr. Slim PSA-RP KA Series Manuale utente

Manuali Condizionatore d'aria popolari di altre marche

Spheros

Spheros CC 355 Manuale utente

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuale utente

Panasonic

Panasonic CS-E12HKEW Manuale utente

nedis

nedis ACMB1WT7 Manuale utente

Samsung

Samsung AR KV Series Guida

Daikin

Daikin FCFV50A Manuale utente

Fujitsu

Fujitsu Inverter ASBA30JFC Manuale utente

Toshiba

Toshiba RAS-M10SMUV-E Manuale utente

Daikin

Daikin FXLQ20MAVE Manuale utente

Hitachi

Hitachi RAS-E24CAK Manuale utente

CIAT

CIAT Magister 2 Series Guida

Bestron

Bestron AAC6000 Manuale utente

Hisense

Hisense 7K Manuale tecnico

Frigidaire

Frigidaire FFRE0533S1E0 Manuale utente

Samsung

Samsung AS09HM3N Manuale utente

Frigidaire

Frigidaire CRA073PU11 Manuale del proprietario

Soleus Air

Soleus Air GB-PAC-08E4 Manuale utente

McQuay

McQuay MCK020A Manuale utente