Mitsubishi Electric FX2N-8AD Manuale utente

USER’S MANUAL

FX2N-8AD Analog input block

Industrial automation

Elincom Group

EuropeanUnion:www.elinco.eu

Russia: www.elinc.ru

FX2N-8AD Analog input block

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the correct installation

and operation of the FX2N-8AD Analog input block. It should be read and understood before attempting to

install or use the unit.

• Further information can be found in the FX0N/FX1N/FX2N/FX2NC/FX3U/FX3UC Series Hardware Manual for

connecting main unit, and the FX Series Programming Manual(ΙΙ).

• If in doubt at any stage of the installation of FX2N-8AD Analog input block always consult a professional

electrical engineer who is qualified and trained to the local and national standards that applies to the

installation site.

• If in doubt about the operation or use of FX2N-8AD Analog input block please consult the nearest Mitsubishi

Electric distributor.

• This manual is subject to change without notice.

FX2N-8AD Analog input block

USER’S MANUAL

This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses.

Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may

occur as a result of using the contents noted in this manual.

FX2N-8AD Analog input block

Manual number :JY992D86001

Manual revision :F

Date :September 2008

FX2N-8AD Analog input block

iii

Guidelines for the Safety of the User and Protection of the FX2N-8AD Analog

input block.

This manual provides information for the use of the FX2N-8AD Analog input block. The manual

has been written to be used by trained and competent personnel. The definition of such a

person or persons is as follows:

a) Any engineer who is responsible for the planning, design and construction of automatic

equipment using the product associated with this manual, should be of a competent

nature, trained and qualified to the local and national standards required to fulfill that

role. These engineers should be fully aware of all aspects of safety with regards to

automated equipment.

b) Any commissioning or service engineer must be of a competent nature, trained and

qualified to the local and national standards required to fulfill that job. These engineers

should also be trained in the use and maintenance of the completed product. This

includes being completely familiar with all associated documentation for said product. All

maintenance should be carried out in accordance with established safety practices.

c) All operators of the completed equipment (see Note) should be trained to use this

product in a safe manner in compliance to established safety practices. The operators

should also be familiar with documentation which is associated with the actual operation

of the completed equipment.

Note : The term ‘completed equipment’ refers to a third party constructed device which

contains or uses the product associated with this manual.

FX2N-8AD Analog input block

Notes on the Symbols Used in this Manual

At various times throughout this manual certain symbols will be used to highlight points which

are intended to ensure the users personal safety and protect the integrity of equipment.

Whenever any of the following symbols are encountered its associated note must be read and

understood. Each of the symbols used will now be listed with a brief description of its meaning.

Hardware Warnings

1) Indicates that the identified danger WILL cause physical and property damage.

2) Indicates that the identified danger could POSSIBLY cause physical and property

damage.

3) Indicates a point of further interest or further explanation.

Software Warnings

4) Indicates special care must be taken when using this element of software.

5) Indicates a special point which the user of the associate software element should

be aware.

6) Indicates a point of interest or further explanation.

FX2N-8AD Analog input block

• Under no circumstances will Mitsubishi Electric be liable responsible for any consequential

damage that may arise as a result of the installation or use of this equipment.

• All examples and diagrams shown in this manual are intended only as an aid to understanding

the text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual

use of the product based on these illustrative examples.

• Please contact a Mitsubishi Electric distributor for more information concerning applications

in life critical situations or high reliability.

FX2N-8AD Analog input block

FX2N-8AD Analog input block Contents.

vii

Guideline............................................................................................................................iii

1. Introduction .........................................................................................1-1

2. External Dimensions...........................................................................2-1

3. Part Name...........................................................................................3-1

4. Installation...........................................................................................4-1

5. Connection to PLC..............................................................................5-1

6. Wiring..................................................................................................6-1

6.1 Caution.............................................................................................................6-1

7. Specifications......................................................................................7-1

8. Buffer Memory (BFM).........................................................................8-1

8.1 Buffer Memories (BFM) lists ............................................................................8-3

8.2 Details of buffer memories.............................................................................8-13

8.2.1 BFM #0, #1: Specifies input mode. ...................................................................8-13

8.2.2 BFM #2 to BFM #9: Number of times of averaging...........................................8-15

8.2.3 BFM #10 to BFM #17: Channel data.................................................................8-17

8.2.4 BMF #19: Disables setting change....................................................................8-17

8.2.5 BFM #20: Initializes functions............................................................................8-17

8.2.6 BFM #21: Writes I/O characteristics..................................................................8-18

8.2.7 BFM #22: Sets convenient functions.................................................................8-19

8.2.8 BFM #24: Specifies high-speed conversion channel ........................................8-20

8.2.9 BFM #26: Upper/lower limit value error status..................................................8-21

8.2.10 BFM #27: A/D data sudden change detection status........................................8-22

8.2.11 BFM #28: Scale over status..............................................................................8-23

8.2.12 BFM #29: Error status.......................................................................................8-25

8.2.13 BFM #30: Model code.......................................................................................8-26

FX2N-8AD Analog input block Contents.

viii

8.2.14 BFM #32: Operating time..................................................................................8-26

8.2.15 BFM#33 disconnection detection (Only goods: since V1.10)............................8-27

8.2.16 BFM #41 to BFM #48: Offset data

BFM #51 to BFM #58: Gain data.......................................................................8-28

8.2.17 BFM #61 to BFM #68: Addition data.................................................................8-30

8.2.18 BFM #71 to BFM #78: Lower limit, error set value

BFM #81 to BFM #88: Upper limit, error set value............................................8-31

8.2.19 BFM #91 to BFM #98: Sudden change detection set value..............................8-33

8.2.20 BFM #99: Clears upper/lower limit value error and sudden change

detection error...................................................................................................8-35

8.2.21 BFM #101 to BFM #108: Peak value (minimum value)

BFM #111 to BFM #118: Peak value (maximum value)....................................8-36

8.2.22 BFM #109: Peak value reset flag (minimum value)

BFM #119: Peak value reset flag (maximum value)..........................................8-37

8.2.23 BFM #198: Data history sampling time .............................................................8-38

8.2.24 BFM #199: Resets or stops data history...........................................................8-40

8.2.25 BFM #200 to BFM #3399: Data history.............................................................8-41

9. Adjustment of I/O Characteristics........................................................9-1

9.1 Standard I/O characteristics.............................................................................9-2

9.2 Adjustment of I/O characteristics.....................................................................9-7

10. Example program..............................................................................10-1

Appendix A

Associated Manuals List...........................................................................A-1

Indice

Altri manuali Mitsubishi Electric Controllori

Mitsubishi Electric

Mitsubishi Electric MELSERVO-J5 MR-J5-G Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric par-u02meda Manuale utente

Mitsubishi Electric

Mitsubishi Electric MR-J5W-G Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-YT51CRB Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q172DCPU Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC LJ72GF15-T2-U-HW Manuale di istruzioni

Mitsubishi Electric

Mitsubishi Electric MELSEC-F FX-16E-TB Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-IF021B-E Manuale utente

Mitsubishi Electric

Mitsubishi Electric CR800-D Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-IF071B-E Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F FX5 Manuale utente

Mitsubishi Electric

Mitsubishi Electric TC-24A Manuale

Mitsubishi Electric

Mitsubishi Electric FX2N-64DP-M Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric GB-24A Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX2N-1PG-E Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX3S-10MR/ES Manuale di istruzioni

Mitsubishi Electric

Mitsubishi Electric NZ2GF-CCB Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX3U-J1939 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELDAS C6 Manuale del proprietario

Mitsubishi Electric

Mitsubishi Electric FX3UC-4AD Manuale utente

Mitsubishi Electric

Mitsubishi Electric MR-J5D Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-SE51CRA Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente