Mitsubishi FX2N-16LNK-M Manuale utente

USER’S MANUAL

FX2N-16LNK-M MELSEC-I/O LINK

REMOTE I/O SYSTEM MASTER BLOCK

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the correct installation

and operation of the FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK. It

should be read and understood before attempting to install or use the unit.

• Further information can be found in the FX PROGRAMMING MANUAL(ΙΙ), FX0N/FX1N/FX2N/FX2NC series

hardware manuals.

• If in doubt at any stage of the installation of FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM

MASTER BLOCK always consult a professional electrical engineer who is qualified and trained to the local

and national standards that applies to the installation site.

• If in doubt about the operation or use of FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM

MASTER BLOCK please consult the nearest Mitsubishi Electric distributor.

• This manual is subject to change without notice.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

USER’S MANUAL Manual number : JY992D73701

Manual revision : D

Date : October 2004

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

Guidelines for the safety of the user and protection of the FX2N-16LNK-M MELSEC-I/O LINK SYSTEM

MASTER BLOCK

This manual provides information for the installation and use of the FX2N-16LNK-M MELSEC-I/O LINK

SYSTEM MASTER BLOCK. The manual has been written to be used by trained and competent personnel.

The definition of such a person or persons is as follows:

a) Any engineer who is responsible for the planning, design and construction of automatic equipment

using the product associated with this manual, should be of a competent nature, trained and qualified

to the local and national standards required to fulfill that role. These engineers should be fully aware of

all aspects of safety with regards to automated equipment.

b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the

local and national standards required to fulfill that job. These engineers should also be trained in the

use and maintenance of the completed product. This includes being completely familiar with all

associated documentation for said product. All maintenance should be carried out in accordance with

established safety practices.

c) All operators of the completed equipment (see Note) should be trained to use this product in a safe

manner in compliance to established safety practices. The operators should also be familiar with

documentation which is associated with the actual operation of the completed equipment.

Note : The term ‘completed equipment’ refers to a third party constructed device which contains or uses the

product associated with this manual.

Notes on the Symbols Used in this Manual

At various times throughout this manual certain symbols will be used to highlight points which are intended to

ensure the users personal safety and protect the integrity of equipment. Whenever any of the following

symbols are encountered its associated note must be read and understood. Each of the symbols used will

now be listed with a brief description of its meaning.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

iii

Hardware warnings

Software warnings

1 ) Indicates that the identified danger WILL cause physical and property damage.

2 ) Indicates that the identified danger POSSIBLY cause physical and property damage.

3 ) Indicates a point of further interest or further explanation.

1 ) Indicates special care must be taken when using this element of software.

2 ) Indicates a special point of which the user of the associate software element should be aware.

3 ) Indicates a point of interest or further explanation.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

• Under no circumstances will Mitsubishi Electric be liable responsible for any consequential damage

that may arise as a result of the installation or use of this equipment.

• All examples and diagrams shown in this manual are intended only as an aid to understanding the

text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the

product based on these illustrative examples.

• Please contact a Mitsubishi Electric distributor for more information concerning applications in life

critical situations or high reliability.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Contents

CONTENTS

1. Notes to User .............................................................................................1-1

1.1 Outline of product ...................................................................................................... 1-1

1.2 Manual configuration and diversified data ................................................................. 1-2

2. Product Specifications ...............................................................................2-1

2.1 System configuration ................................................................................................. 2-1

2.2 Appearance and name of each portion .....................................................................2-3

2.3 General specifications and performance specifications ............................................ 2-4

3. Connection and Wiring ..............................................................................3-1

3.1 Cautions on connection ............................................................................................. 3-1

3.2 Connection method ................................................................................................... 3-7

4. Operation ...................................................................................................4-1

4.1 Operating procedure .................................................................................................. 4-1

4.2 Setting and function of each portion .......................................................................... 4-2

4.3 Setting of station No. .................................................................................................4-7

4.4 Program ..................................................................................................................... 4-8

5. Troubleshooting .........................................................................................5-1

6. Remote I/O Unit .........................................................................................6-1

6.1 Model name structure ................................................................................................6-1

6.2 Outside dimensions ................................................................................................... 6-2

Appendix ...................................................................................................... A-1

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Contents

MEMO

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Notes to user 1

1-1

1. Notes to User

1.1 Outline of product

The MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK FX2N-16LNK-M (hereinafter referred to as

"master block") is connected to an FX0N/FX1N/FX2N/FX2NC Series programmable controller (PC), and realizes

a remote I/O system which saves wiring and enables easy programming for communication with remote I/O

units.

Applicable PC

The master block can be connected as a special block of an FX0N/FX1N/FX2N/FX2NC Series PC.

When it is connected to an FX2NC Series PC, a connector conversion interface FX2NC-CNV-IF is required.

Features

1 ) Many control points

One master block can control up to 128 points (64 input points and 64 output points) (when mixed I/O

type remote I/O units having 8 or 16 control points are used).

To one master block, up to 16 remote I/O units can be connected.

2 ) Wiring saving

A master block and a remote I/O unit can be easily connected with a twisted-pair or cabtyre cable.

3 ) Total extension distance: 200 m

The distance can be extended up to 200 m in the entire system.

Terminal resistors are not required, and connection using T branches can be realized.

4 ) Free from system down caused by failure in one station

Even if failure has occurred in a remote station in the system, the system does not come down.

Diversified error indication LEDs facilitate quick troubleshooting.

5 ) Easy programming

Element Nos. for inputs (X) and outputs (Y) are assigned to remote I/O units in the same way as general

I/Os.

Communication programs are not required.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Notes to user 1

1-2

1.2 Manual configuration and diversified data

This user manual exclusively is packed together with the master block.

For programs in a basic PC unit, handling of remote I/O units, etc., refer to the corresponding data.

User manual (this manual)

This manual describes cautions on safety, specifications, attachment and wiring of the master block, program-

ming and troubleshooting.

User manual of MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER UNIT AJ51T64/A1SJ51T64

(detailed volume)

This manual describes the specifications of remote I/O units connected to the master block.

Indice

Altri manuali Mitsubishi Controllori

Mitsubishi

Mitsubishi melservo-j2 series Manuale utente

Mitsubishi

Mitsubishi AD71S1 Manuale utente

Mitsubishi

Mitsubishi QD75M1 Manuale utente

Mitsubishi

Mitsubishi FX3U-32DP Manuale utente

Mitsubishi

Mitsubishi FX0N-16NT Manuale utente

Mitsubishi

Mitsubishi A1SD75P1-S3 Manuale utente

Mitsubishi

Mitsubishi FX2NC-485ADP Manuale utente

Mitsubishi

Mitsubishi L02CPU Manuale utente

Mitsubishi

Mitsubishi Alpha XL Manuale utente

Mitsubishi

Mitsubishi MELSEC Q Series Manuale utente

Mitsubishi

Mitsubishi Melsec A series Manuale utente

Mitsubishi

Mitsubishi MELSEC-F FX-50DU-TKS-C Manuale utente

Mitsubishi

Mitsubishi AG-150A Manuale utente

Mitsubishi

Mitsubishi Q01CPU Manuale utente

Mitsubishi

Mitsubishi QX10 Manuale utente

Mitsubishi

Mitsubishi AJ65BT-64RD3 Manuale utente

Mitsubishi

Mitsubishi AJ65BT-R2 Manuale utente

Mitsubishi

Mitsubishi FX2NC-485ADP Manuale utente

Mitsubishi

Mitsubishi AL2-2TC-ADP Manuale utente

Mitsubishi

Mitsubishi CR751-D Series Manuale utente

Mitsubishi

Mitsubishi AL2-2PT-ADP Manuale utente

Mitsubishi

Mitsubishi MELSEC Q Series Manuale utente

Mitsubishi

Mitsubishi FX3G-2AD-BD Manuale utente

Mitsubishi

Mitsubishi MELSEC A1SCPU Istruzioni per il montaggio

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente