Mixcder E7 Manuale utente
User’s Manual
Wireless Headphone
MODEL:E7
2. Package Contents
3. Product Overview
1. Introduction
Thank you for purchasing the Mixcder E7 Active Noise
Canceling Wireless Headphone. Mixcder E7 active noise
canceling technology monitors the noise around you and
cancels it out for travel, work and anywhere in between,
helping you focus on what you want to hear. E7 has
fashionable appearance and eco-friendly package design.
Built-in rechargeable battery provides more music playing
and standby time. It’s engineered to sound better, be more
comfortable and easy to carry.
E7 can be used both wired and wireless via Wireless V4.0
to communicate with your Wireless-enabled device till 10
meters range. Its powerful and rich bass speaker brings
you amazing and unprecedented audio enjoyment.
Note: Please read the user’s manual carefully before using,
and keep it properly for future reference.
- Wireless headphone*1
- Micro USB charging cable*1
- 3.5mm audio cable*1
- User’s manual*1
- Compact carrying case*1
- Warranty card*1
EN-1
8/9
2
5
4
7
6
1
3
4. Charging the Battery
Use the supplied micro USB charging cable to recharge the
battery. It takes about 2 hours for the first charge and after
charging for as long as 1-1.5 hours. The headphone LED
turns to solid red during charging. When the battery is fully
charged the LED turns off.
You can also use the Wireless function during charging but
will extend the charging time. If you use the audio cable or
turn the headphone off for charging that will not affect the
charging time.
When the battery is low, the LED flashes red light. At the
same time the headphone also provides a low battery
warning tone.
Note: It is strongly recommended fully charging for the first
use. Playtime varies according to volume level and audio
content .
1.Microphone
2.3.5mm line-in jack
3.Power button
4.Previous track/V-
5.Next track/V+
6.LED Indicator/Charging LED
7.Micro USB interface for charging
8.Noise canceling LED indicator
9.Noise canceling on/off
10.Micro USB Charging Cable
11.3.5mm Audio Cable
EN-2
10 11
5.Pairing with Wireless Devices
5-1 Pairing the headphones with a computer
Before pairing the headphone with your computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above.
1.Make sure the headphone is off.
2.Start the Wireless program in the computer.
3.The “Search new device” screen will be displayed.
4.Do not place both devices more than one meter away
from each other.
5.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding down
on the power button until you see the LED indicator flashes
blue and red alternately, which means your headphone is in
"pairing mode" waiting to be paired with your device. You
will hear a prompt.
6.As soon as the computer system detects the new device
and select “Mixcder E7". Once successfully paired, the LED
turns to solid blue. You will hear a prompt.
5-2 Pairing the headphone with a phone
1.Make sure the headphone is off.
2.Do not place both devices more than one meter away
from each other.
EN-3
Micro USB charging cable to the USB Interface for charging
EN-4
3.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphone is in "pairing mode"waiting to be paired with
your device. You will hear a prompt.
4.Start Wireless function on your phone and search for new
devices.
5.Select the “Mixcder E7” to pair. Once successfully paired,
the LED turns to solid blue. You will hear a prompt.
5-3 Connecting to paired devices
Mixcder E7 will pair with the last paired device automati-
cally when turning on. Because of different systems, some
computers or laptops may need to be manually paired
every time.
6. Active Noise Canceling
Mixcder E7 contains a noise canceling circuit, Noise mainly in
an airplane, buses or trains is effectively reduced.
1).The noise canceling effect may not be pronounced in a very
quiet environment, or some noise may be heard.
2).The noise canceling effect may vary depending on how you
wear the headphones.
3).The noise canceling function works for noise in the low
frequency band primarily. Although noise is reduced, it is not
canceled completely.
4).When you use the headphones in a train or a car, noise
may occur depending on street conditions.
EN-5
8. Using a Wired Headphone
7. Making and Answering a Call
7-1 Making a call
The E7 provides a 3.5mm audio jack located on the side of ear
cup and an included audio cable for wired use.
This allows you to use the audio function with other devices
without having wireless function. When the headphone's
battery is low, you can still enjoy the music without worrying
battery dead.
Note: The microphone can't work when using as wired
headphone.
1.Make sure the headphone is pairing to the mobile phone.
Dial through the mobile phone and press the call button on the
phone.
2.To end a call, press the power button once again or also end
the call directly by the phone.
7-2 Answering a call
Make sure the Headphone is pairing with your phone. Please
refer to chapter 5. Pairing with Wireless devices.
1.When a call is incoming. The LED flashes red, then keeps in
solid blue.
2.Press the power button on your headphone or the answer
button on your phone to answer the call. If there is the music
playback, it will pause.
3.To end a call, press the power button once again or also end
the call directly by the phone.
4.As soon as the call is ended, the music will continue to play
automatically.
EN-6
9. Take Care Your Headphone
-Store the Headphone with power off and in a dry
environment.
-If you don’t use the headphone for a long period, charging the
battery every 2 months for 1-2 hours.
-Use a dry cloth for cleaning if needed.
-Avoid dropping the headphone from high places or on hard
surfaces.
-Avoid exposing the headphone to extreme temperature.
(Recommended Storage temperature is -40˚C-80˚C.)
-The headphone is NOT waterproof. Avoid exposing the
headphone to rain or getting liquids into any button port or
other openings.
-Please don’t twist or bend the headphone. This may cause
permanent deformation.
-The built-in battery can’t be disposed in the fire to avoid
explosion.
Avoid exposing to
liquids and rain
Avoid exposing to
extremely temperature
Avoid dropping
from high places
Using as a wired headphone
with a 3.5mm audio cable
EN-7
10. Protecting your Hearing
The Headphone is held close to your ears, so loud sounds
pose a potential hearing risk. It is highly recommended that
setting low volume level before putting on the headphone
and avoiding exposing yourself continuously to high
volumes. If you need to use the headphone for a long
period, rest ten minutes for a half hour using.
11. Control Instructions
Function Operation
Play media Press the power button
End a call Press the power button
Power on When the headphone is off, press and hold the power
button 3 seconds, and the LED flashes blue and
sounds a prompt.
Answer a call Press the power button to answer the call.
Power off When the headphone is on, press and hold the power button
3 seconds, and the LED flashes red and sounds a prompt..
When the headphone is on, press and hold the power button
3 seconds, and the LED flashes red and sounds a prompt..
Pause/restart
media playback Press the power button
Increase
volume Press the Volume Up V+ button
Decrease
volume Press the Volume Down V- button
Skip to next
track Press and hold the V+ button for 1-2s
Skip to previous
track Press and hold the V- button for 1-2s
Noise Canceling
On Press the Noise-Canceling Button to ON, Blue LED
light on.
Noise Canceling
Off Press the Noise-Canceling Button to OFF, Blue LED
light off
Play media Press the power button
End a call When a call is ended, press the power button
Answer a call When a call rings, press the power button
Pause/restart
media playback Press the power button
Increase
volume Press the Volume Up V+ button
Increase
volume
Decrease
volume Press the Volume Down V- button
Skip to next
track Press and hold the V+ button for 1-2s
Skip to previous
track Press and hold the V- button for 1-2s
Noise Canceling
On Push the Noise-Canceling Button to ON, Blue LED light
on.
Noise Canceling
Off Push the Noise-Canceling Button to OFF, Blue LED
light off
Pairing Press and hold the power button about 5 seconds, then the
LED flashes in red and blue, the voice will prompt.
EN-8
12. Troubleshooting
Q: The headphone cannot be turned on.
A: The battery may be flat. Please recharge the battery and
try again. Refer to chapter 4. Charging the Battery.
Q: Why doesn’t the headphone pair with the mobile phone?
A: Please check the followings.
-Check that the headphone is charged and is in pairing
mode.
-Make sure that the mobile phone's Wireless function is on.
-Make sure the two devices are in the effective pairing
range. (10 meters).
-Make sure that there is no obstacle between the
headphone and the mobile phone, such as electronic
equipment and a wall.
-Furthermore, you can try restarting the headphone and
pairing it with the mobile phone again.
-Make sure the paired device’s wireless function is turned
off.
Q: There is some noise.
-A: Wireless is a radio technology, so it is sensitive to
obstacles between the headphone and the pairing device.
Please make sure that there is no obstacle between the two
devices and is within 10 meters.
Q: I can't hear sound.
A: Please check the followings.
Note:
There will be a alert tone when the volume reaches the
maximum level.
EN-9
13. Warranty
The E7 is covered by a 1-year manufacturer warranty. For
more information,
visit: www.mixcder.com/Support/Warranty.html
-Try increase the volume.
-Make sure that the Wireless function is on and whether the
two devices are connecting and within 10 meters.
Q: My mobile phone or computer cannot find the headphone.
A: Please check that the headphone is in pairing mode.
Refer to chapter 5. Pairing with Wireless devices.
Sometimes when the headphone is connected too many
Wireless devices, it cannot search and pair effectively. Or
your mobile phone and computer are already connected to
many other devices. Try removing some connections
before searching the headphone.
Altri manuali per E7
2
Indice
Lingue:
