mlink MP290 Manuale utente
mLink MP290
Portable Wireless Gateway
User Manual V1.0
MP290 Portable Wireless Gateway
2
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
目录
1. Product Overview..............................................................................................................................3
2. Operation .............................................................................................................................................4
2.1. Power On......................................................................................................................................................4
2.2. Power Off .....................................................................................................................................................5
2.3. Activate Bluetooth.......................................................................................................................................5
2.4. Alarm Indication.........................................................................................................................................5
2.5. Charging.......................................................................................................................................................5
3. User Interface......................................................................................................................................5
3.1. mPower Suite App.......................................................................................................................................5
3.2. Operating Environment..............................................................................................................................6
3.2.1. Hardware Requirement......................................................................................................................................6
3.2.2. System Requirement .............................................................................................................................................6
3.2.3. Operating Environment Requirement....................................................................................................................6
3.3. Operation .....................................................................................................................................................6
3.3.1. Search and connect detectors ................................................................................................................................6
3.3.2. Disconnect the detectors........................................................................................................................................8
3.3.3. Shortcut buttons ....................................................................................................................................................8
3.3.4. mLink Operation ...................................................................................................................................................8
3.4. Software Information................................................................................................................................14
3.4.1. EULA..................................................................................................................................................................14
3.4.2. Software Setting..................................................................................................................................................15
3.4.3. Data Logging.......................................................................................................................................................16
3.4.4. Event Log............................................................................................................................................................18
3.4.5. Software Log.......................................................................................................................................................19
MP290 Portable Wireless Gateway
3
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
Read Before Operating
This manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining or
servicing this product. The product will perform as designed only if it is used, maintained and serviced in accordance with
the manufacturer’s instructions. The user should understand how to set the correct parameters and interpret the obtained
results.
WARNINGS !
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Proper Product Disposal at the End of Life
The Waste Electrical and Electronic Equipment (WEEE) directive (2002/96/EC) is intended to
promote recycling of electrical and electronic equipment and their components at end of life. This
symbol (crossed-out wheeled bin) indicates separate collection of waste electrical and electronic
equipment in the EU countries. This product may contain one or more Nickel-metal hydride
(NiMH), Lithium-ion, or Alkaline batteries. Specific battery information is given in this user guide.
Batteries must be recycled or disposed of properly. At the end of its life, this product must undergo
separate collection and recycling from general or household waste. Please use the return and
collection system available in your country for the disposal of this product.
MP290 Portable Wireless Gateway
4
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
1. Product Overview
MP290 is a gateway platform for on-site real-time forwarding or uploading of terminal device
data. It communicates with terminal devices such as VOXI (Mounti), NEO, etc. using short-
range wireless module MP280L. After the gateway collects terminal device data, it can upload
the information to the cloud server through the internal BLE module. If there is no available
network connection on site, this device can also relay data with another host within 2~3Km. The
MP290 has a built-in BLE Bluetooth module, which can be easily configured or read data with
the mPower Suite app of the mobile phone.
Main Feature:
Compact Structure
• Compact structure, rubber boot protection
Easy Operation
• Single button operation
Bluetooth 4.0
• Built-in BLE4.0 module, connected to mobile phone mPower Suite app
Data transmission
• LORA short-range wireless communication
mPower Suite App
•Supports 8 Bluetooth device connections at the same time, and can operate
simultaneously on each connection
•Support real-time data monitoring and equipment maintenance, as well as data record
downloading and sending, etc.
•Real-time monitoring supports sound and/or vibration alarm, and supports remote phone
SMS alarm and/or email alarm
•Support local storage, browsing and email sending of data and events
•Support real-time upload of data to the cloud
Durable
•Continuous running time with full power is greater than 24 hours
2. Operation
There is only one button on the MP290 portable gateway, which is used to power on/off the unit
and start the Bluetooth connection function. Other operations such as registering the device,
reading data, checking status, etc. all need to be performed on the mobile phone mPower Suite
app.
2.1. Power On
In power-off state, press the button for 5 seconds, the green LED light is on, mLink power on.
After releasing the button, the mLink automatically enters the Bluetooth pairing state, and the
green indicator light flashes.
If the red indicator light is on after 5 seconds of pressing the button, it means that the battery
MP290 Portable Wireless Gateway
5
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
is low. After releasing the button, the mLink will automatically shut down. Please charge the
mLink.
2.2. Power Off
In power-on state, press the button for 5 seconds, the red LED will be on. After the button is
released, the mLink will automatically shut down. It should be noted that the mLink will
automatically shut down when the battery is too low.
2.3. Activate Bluetooth
In power-on state, press the button, the LED indicator will flash green, and the mLink enters
the Bluetooth pairing state. At this time, you can search and connect to the mLink on the mobile
app. After the connection is successful, the LED will off and the information of the mLink will be
shown on mPower Suite. The Bluetooth pairing will be automatically cancelled after the indicator
flashes for a period of time and return to normal working status.
2.4. Alarm Indication
When the battery is low, the LED flashes green to remind the user to charge. In addition, you
will receive a more intuitive low battery warning message on mPower Suite.
2.5. Charging
Please use mPower charger adapter to charge the mLink. A full charging takes about 5 hours.
3. User Interface
All data of MP290 portable gateway is viewed on mPower Suite, and all connected wireless
devices are managed through the app.
3.1. mPower Suite App
mPower Suite Android version is an application software based on theAndroid mobile
platform. As part of the mPower Electronics application service, it provides the basic software
functions required during the use of the device.
main feature:
1. Supports 8 Bluetooth device connections at the same time, and can operate
simultaneously on each connection;
2. Support real-time data monitoring and equipment maintenance, as well as data record
downloading and sending;
3. Real-time monitoring supports sound and/or vibration alarm, and supports remote phone
SMS alarm and/or email alarm;
4. Support local storage, browsing and email sending of data and events;
5. Support real-time upload of data to the cloud.
MP290 Portable Wireless Gateway
6
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
3.2. Operating Environment
3.2.1. Hardware Requirement
Devices such as Android phones andAndroid tablets.
3.2.2. System Requirement
Android（6.0 and above）
3.2.3. Operating Environment Requirement
Safety area, non-hazardous.
3.3. Operation
3.3.1. Search and connect detectors
1、Run App，click button，as shown in Figure 1.
图1 搜寻仪器
MP290 Portable Wireless Gateway
7
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
2、Click to select detector, as shown in figure2.
图2 连接仪器
3、Repeat steps 1 and 2, to connect other detectors. As shown in figure 3. Up to 8 detectors
can be connected at the same time.
图3 连接多个仪器
MP290 Portable Wireless Gateway
8
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
3.3.2. Disconnect the detectors
Click the button below the detector icon to disconnect
3.3.3. Shortcut buttons
The short buttons are:
1）Disconnect
2）Bluetooth connection (status)
If the Bluetooth connection of the mLink is lost, the panel of the mLink is grayed out.
Clicking on the Bluetooth connection (status) will try to reconnect.
3）Click the mLink icon or the blank area on the right to enter the detail operation screen of
the mLink
If the Bluetooth connection of the mLink is lost, the panel of the mLink is grayed out.
Clicking on the mLink icon will try to reconnect.
3.3.4. mLink Operation
The operation of the wireless gateway is divided into "event", "system" and "squad". Click on
the mLink panel to enter the wireless gateway operation, the App will automatically enter the
"squad" screen for wireless real-time monitoring.
mPower wireless devices need to be registered with the wireless gateway before join the
wireless system. Click "System" to enter the system configuration.
MP290 Portable Wireless Gateway
9
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
3.3.4.1. System
Click "Register Device" to start the operation of wireless device registration to the gateway.
MP290 Portable Wireless Gateway
10
(C) mPower Electronics (Shanghai) Co., Ltd. Rev. 2019-5
After the device is registered, it will be shown in the list. Up to 50 devices can be registered (but
8 devices are connected at the same time).
Click "Remove" to unregister the device;
Click "Test" to check the device. After receiving the command, the buzzer of the device will sound
and flash the light.
After entering the device holder number on the lower right side, click "Distribute to" to send the
user ID to the device.
Note: This user ID only supports ASCII characters, no Chinese.
Indice
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
