MMT HYPEBOX Manuale utente
Connect the monitor with the supplied power cables
The power operating range of HYPEBOX is AC 110-240V, 50-60Hz.
Please use one of the power cords provided with this unit. If none of the cords
provided fits your socket, use a power cord
that matches the AC voltage of the power outlet and complies
with the safety standard of your Country.
Installation
HYPEBOX Transparent LCD Showcase
All models
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
1
Estimated max. power consumption:
HYPEBOX 21.5“ Landscape: 0,3A - 75W
HYPEBOX 21.5“ Portrait: 0,4A - 100W
HYPEBOX 32“ Landscape: 0,65A -140W
HYPEBOX 32" Portrait: 0.8 A - 185W
HYPEBOX 43“ Landscape: 0,7 A - 165W
HYPEBOX 43“ Portrait: 1.0 A - 235W
HYPEBOX 49“ Landscape: 0,6A - 140W
HYPEBOX 49" Portrait: 1.1A - 260W
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
1 x HDMI cable
1 x USB cable (touch models only)
1 x remote control for the display
1 x remote control for the back light (N/A in size 19" and 21.5")
1 set of keys + 1 spare set
Accessories included:
1 x Power cable EU
1 x Power cable UK
1 x Power cable US
Power Supply
By purchasing the HYPEBOX, you have chosen a high quality device, designed
and built to last. Thank you for your trust.
We constantly improve and perfect our solutions. Feel free to contact us for any
suggestion or comment at [email protected]
Our technicians carefully test each unit for 48 hours. If after reviewing this
manual you still have questions, please contact us at s[email protected]; we will
assist you as soon as possible.
HYPEBOX 55“ Landscape: 0,7A -170W
HYPEBOX 55“ Portrait: 1,7A - 390W
HYPEBOX 43" Front-Opening: 1.1A - 255W
HYPEBOX 49" Stele: 1.2V - 280W
Input Source (Integrated media player or external device)
There are 2 ways to display images on the HYPEBOX.
1) By using the Integrated Media Player:
- save your images and video files in a USB stick and connect it in USB Port located on the back
of the unit.
- files must be saved in the root folder and will be played continuously, in loop. To assign a
specific order, rename the files such as 1, 2, 3, etc... keeping the file format (i.e., .jpg).
Supported formats are MP4 / .AVI / .MPG / .MP2.
NOTE: In HYPEBOX models with integrated touch sensor touch make sure to use the "USB" port and
not the "Touch USB" port.
NOTE 2: Speakers are available in HYPEBOX size 19" and 21.5" only. To listen to the audio of your
contents, in any other HYPEBOX size, please use an external player and speaker system.
2) Connect the HYPEBOX to your PC / MAC / external media player using the HDMI port on the back
of the unit.
Using the Mail Power Switch located on the back of the unit,
turn the HYPEBOX on to automatically display the video signal
coming from the selected source.
Please make sure that the correct Input Signal is selected.
You can do so using the remote control (provided with any HYPEBOX unit)
or the physical buttons on the back of the unit (size 32" to 55" only).
Carefully point the remote towards the IR receiver. Depending on
the model, the receiver might be located on the front or the back.
Press the SOURCE button, select the desired input and press Enter
to confirm.
NOTE: some of the buttons have been disabled by default;
if you notice that some are not working, this is completely normal.
SOURCE --> A menu appears on the screen.
Please choose Media (USB) or HDMI by using the Down and Up buttons
and confirm with the Enter button.
The selection will be saved for the next time.
Installation
HYPEBOX Transparent LCD Showcase
19“ to 55" V1 touch and non-touch
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
2
Example only - colors,
buttons or shape of the
remote may vary
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
Placing objects inside the HYPEBOX
In order to showcase products / objects inside the unit, please open the access panel. NOTE:
Do not lower the back door all the way down or you will damage the hinges.
1) unlock the back panel using the keys and/or the release locks,
2) then open it for just a few cm or inches (1)
3) lift and remove it completely (2)
Installation
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
3
After you have placed your object inside the box, you can close and lock the access panel.
STOP!
LIFT TO
REMOVE
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
HYPEBOX Transparent LCD Showcase
19“ to 55" V1 touch and non-touch
Click “next” on the
installation interface.
Assign the installation path.
Installation
HYPEBOX Transparent LCD Showcase
Touch Models V1 only - size 21.5“ to 55“
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
4
Touch sensor driver download & installation
NOTE: Different Touch sensor are integrated in HYPEBOX, depending on the specific model
you are using. The procedure blows is valid for the following models: HBT2102L,
HBT2102P, HBT3210L, HBT3210P, HBT4310L, HBT4310P, HBT4910L, HBT4910P,
HBT5510L, HBT5510P. Not valid for HBT43L-FS, HBT43L-IW, HBT49P-S.
Installing the driver will allow the computer and display to recognize the multi-touch unit
(integrated). Follow the simple instructions below to complete your installation. The
example belows shows the procedure to download and install the drivers in a Windows
PC for HYPEBOX touch models size 21.5" to
55" (PQLabs IR frames).
Do not connect the USB cable from your PC to the HYPEBOX yet.
Download the necessary drivers at: https://www.mmt.io/support/
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
Wait until the installation process
is completed.
Select “reboot now”, and click
“finish".
Connect the HYPEBOX Touch port to your external device
The touch sensor integrated in the HYPEBOX will only work when connects to and external
device such as a Windows PC, MAC or an external player (better if HDI compliant, i.e.
BrightSignⓇ) .
Using the USB cable provided, connect the "USB Touch" port on the back of the HYPEBOX
to a USB port on your device. The first time you connect it, you may have to wait a few
seconds to allow Windows to detect and configure the touch sensor.
NOTE: We recommend not use USB extension as depending on the brand and
model used, this can cause a delay in the touch signal transmission or to
completely interrupt it. Test it carefully before implementing it in your final
installation!
Installation
HYPEBOX Transparent LCD Showcase
Touch Models V1 only - size 21.5“ to 55“
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
5
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
First use
Now that the drivers are installed and your external player is connect to the HYPEBOX, you can
start using the touch sensor.
The sensor is automatically calibrated. If needed, it is possible to manually calibrate it
following this simple procedure.
1) in Windows, please launch the installed tool „MultiTouch Platform“ and click the
„Calibrate“ button.
2) the calibration process will begin, a cross will be shown on the screen.
3) press the crosses for at least 1 second or until instructed.
4) after all 4 crosses have been pressed, the software will save the calibration, that means
you only have to calibrate the unit once.
5) you can use the HYPEBOX.
Installation
HYPEBOX Transparent LCD Showcase
Touch Models V1 only - size 21.5“ to 55“
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
6
NOTE: make sure the mouse is disconnected during the calibration and that no objects
are touching the screen.
Testing the unit
1) is the unit correctly connected to a stable 110-240V, 50-60Hz power source? Is the power
cable loose? Have you tested the power socket and the extension cords (if any)?
2) is the power button on the back of the HYPEBOX unit turned ON?
3) is the right input source selected? If not, the NO SIGNAL message will be displayed
4) Are you using the internal media player or an external player?
-Internal media player:
are the files saved in the root folder of your USB stick?
are they in the supported formats MP4 / .AVI / .MPG / .MP2?
are the files in the right resolution (usually 1920 x 1080px, check the HB model)
-External PC/player:
is the HDMI cable connected?
have you tested with a regular screen if the PC/player you are using is actually
transmitting a video signal, in the right resolution (usually 1920 x 1080px)?
6) Touch sensor:
-is the USB cable provided with the unit, connected from your device
(PCplayer) to the "USB Touch port on the back of the HYPEBOX?
-have you tried to reboot the external PC/player you are using?
-have you tried to install the touch sensor drivers?
-is the PC/Player connected to other devices (screens, touch screens, etc...)
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
Adjustable back light
In latest HYPEBOX models (except 19" and 21.5") it is possible to adjust the intensity of the
back light.
This is recommended especially in rooms with low illumination, to avoid that the HYPEBOX is
too bright, or to make sure that the images and colors are properly displayed on screen and
not washed out.
The bluetooth remote control is already per-configured and tested by our team before
shipping. If needed, follow the procedure below to pair the remote control once again.
While keeping pressed one of the Zone ON buttons on the remote control, turn ON the
HYPEBOX using the main power switch on the back of the unit.
If this should not work, there is an additional way to reset and pair again:
1) switch OFF the HYPEBOX using the main switch on the back
2) switch it ON and immediately after, within 5 seconds, press channel 1 in the
remote control for five times. This will reset the remote.
2) now turn the unit OFF, then switch it on again and press channel 1 for three times
(pairing).
Installation
HYPEBOX Transparent LCD Showcase
32" to 55" V1 touch and non-touch, 43" Front Opening and 49" Stele
MMT GmbH & Co. KG - Waldenserstr. 2-4, 10551 Berlin, Germany
7
For the latest data sheet, technical drawings and to receive support, please visit: www.mmt.io/support
White is
transparent
OPTION 2
external PC/Player:
Connected to
the Cloud
Compa�ble with common players, OS, file formats:
HYPEBOX
Connec�on guide
Touch Signal
USB cable
Video Signal
HDMI cable
1920x1080px
FullHD
OPTION 1
Integrated
Media Player
to reproduce
images and
videos
saved locally
(no touch)
White is
transparent
OPTION 1
integrate a PC/player
inside the unit (OPS SLOT-IN)
OPTION 2
external PC/Player:
Connected to
the Cloud
Compa�ble with common players, OS, file formats:
HYPEBOX Front Opening 43”
Connec�on guide
Touch Signal
USB cable
Video Signal
HDMI cable
FullHD
1920x1080px
Questo manuale è adatto per i seguenti modelli
16
Indice
Altri manuali MMT Rack e supporto
