MOB MO6166 Manuale utente
USER MANUAL
(2014/53/EU art. 10-8)
(a) Frequency Range; 2402-2480 MHz
(b) Maximum radio-frequency power; 20dBm (EIRP)
(2014/53/EU art. 10-9 Simplified Declaration of Conformity)
Hereby, MOB, declares that item MO6166 complies with the essential requirements and
other relevant conditions of directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.momanual.com
MOB, PO BOX 644, 6710 BP (NL).
PO: 41-XXXXX
Made in China
MO6166
EN
Wearing method
Best to wear the band just above the wrist as shown.
Please fit the adjustable sizing holes according to your wrist size,
and then do up the wristband buckle.
The sensor should be in contact with the skin and avoid
movement.
Charging the band
Please ensure the band is fully charged the first time you go to use
it. Please charge the band first if it cannot be powered on, and then
the band will automatically start working.
Power on/off
1. In shutdown state, please long touch the function key over 4
seconds to start the device with vibration.
2. To power off press the function key for more than 3 seconds to
enter the shutdown interface, and short touch to select YES,
system will be powered off if no operation within 3 seconds.
Band operation
1. In power on mode, short touch the function key to light up the
screen to default page with date and time information.
2. In the default time/date page, short touch the function key can
switch band to different pages. The screen will be turned off if
no operation in 5 seconds.
3. In heart rate/blood pressure page, long touch the function key to
start the measurement. The result will be displayed for 50s, and
then the screen will be turned off automatically.
Install the band APP on the phone
To download and install "Yoho Sports", please scan the QR code
below, or search in the APP Store.
System Requirements: Android 5.0 and above; iOS9.0 and
above; Wireless 4.0 support.
Bundle the band to APP
For the first time using the band, please connect it to the APP to
calibrate the time and date, otherwise the pedometer and sleeping
monitor will not be accurate. The band will automatically be
synchronized when successfully connected.
Open the app and click the settings icon
My device
Pull down to scan device
Click on the device
band to APP
•After the band is bundled to APP successfully, the APP will save
the band info, search and connect the band automatically if the
APP is opened or running in the background.
•Pls ensure the band has all the required permissions of the
system during installation or set the permission in your phone's
system settings, such as running in background and reading
contact information.
APP functions and settings
Personal information
Please set personal information after entering the APP.
Settings →personal settings, you can set the gender - age - height
–weight to ensure the accuracy of distance and calorie calculation.
You can also set your daily exercise and sleep goals and monitor
daily completion.
Message notification
Incoming call:
In the connected state, if the incoming call reminder function is
enabled, the band will vibrate when there is incoming call, and the
name or number of the incoming call will be displayed. (Need to
set permission for APP to access phone address book)
SMS notification:
In the connected state, if the SMS remind function is enabled, the
band will vibrate when there is a SMS.
Other reminders:
In the connected state, if you turn on this feature, the band will
vibrate when there are WeChat, QQ, Facebook and other
notifications on your phone, and the message will be displayed on
wristband. (Need to turn on notification in phone system and set
permission of APP to access system notifications).
Vibrating reminder:
If turned on, the band will vibrate when there is a call, information
or other reminder. If turned off, there will only be reminder on
screen without vibration, so as not to disturb you.
Sedentary reminder:
Set to enable/disable the sedentary reminder function. You can set
the reminding interval in the profile; thus, the band will remind you
if you sit for a long time over that interval.
Tips for Android phone users:
The reminder function needs to be set to allow "Yoho band"
running in the background; it is strongly recommended to add
"Yoho band" in the entitlement management to trusted list and
allow all permission to enable full functions.
APP features and settings
Smart alarm clock
In the connected state, three alarm clocks can be set and
synchronized to the band.
Offline alarm is also supported. After successfully synchronized,
even if the APP is not connected, the band will still alarm according
to set time.
Band display settings
In this option, you can set the display pages on your band. The
enabled function pages will be switched one by one with your
touch on function key, and disabled function page will not appear.
Looking for band
In connected state, click the "Looking for band" option, the band
will vibrate to cause your attention.
Shake to take selfie
In the connected state, enter the “shake to take selfie”in APP,
shake the band, and the APP will take photos automatically after 3
seconds countdown. Please allow APP to access the camera and
photo album to take and save the selfie.
Function
Raise your hand to light up the screen: set the raise your hand to
light up the screen, and the screen will automatically light up every
time you raise your hand.
Sedentary switch: please set the time of sedentary reminder and
save it.
Band display settings
Replace the dial background, select the time position and then
sync to the band.
After the APP prompts for successful synchronization, the display
can be viewed on the band.
Band display instructions
Long touch for 2 seconds in each page to enter the sub-menu of
that function.
Date and Clock
After synchronized with the phone, the date and clock on band will
automatically be calibrated.
Standby Settings: Enter theme interface, can switch three themes.
Pedometer
Wear a band to automatically record your daily activity. You can
view the real-time steps of the day.
Distance
Based on the number of your daily activity and your personal
profile, the distance you traveled will be displayed.
Calories
Based on your walking distance and your personal profile, the
calories burned will be displayed.
Heart rate, blood pressure
Switch to the heart rate or blood pressure interface, long touch to
enter measurement page, and the result will be displayed in 40
seconds. This feature is only supported if the band has heart rate
or blood pressure sensor.
Motion Mode
Long touch to enter motion mode, short touch to switch to running
mode, rope-skipping, or sit-up mode. Long touch to enter each
mode.
Running mode
The pedometer count will start from 0 when switched to this mode.
System time, lasting time and activity number in this period will be
shown in this mode. The activity number will be count in daily
number when quit to normal mode.
Rope-skipping mode
System time, lasting time and rope-skipping number in this period
will be shown in this mode. The record will be cleaned after
quitting.
Sit-up mode
System time, lasting time and sit-up number in this period will be
shown in this mode. The record will be cleaned after quitting.
Weather
After synchronizing with the mobile phone, you can enter the
weather interface to view the current weather, including weather
conditions, the highest temperature, the lowest temperature and so
on.
Music control
Enter the music control interface, can play or pause music and
switch the previous song or the next one.
Temperature Measurement
Please wear for 15 minutes each time before measuring the
temperature.
Note: The temperature measurement results vary according to the
ambient temperature, and the data is for reference only.
Sleep mode
The bracelet will automatically monitor your sleeping status in
night; it will detect your sleep status with deep sleep / light sleep /
awake times, calculate your sleep quality; the result can be
checked on APP.
Note: The band will track sleeping status only when you wear it
during your sleep at night. Place the band somewhere will not trig
the sleeping monitor. Sleeping status from 9:00pm to 9:00am will
be recorded.
Please synchronize your band with APP after 9:00am the next day
to upload the data before you check it.
Factory data reset
Long press 10 seconds in the MAC address interface to restore
factory Settings. Select YES to restore factory Settings.
Specifications
Device type
Smart band
Battery
Lithium
polymer
Vibration
motor
Support
Connectivity
Wireless
4.0
Operating
temperature
-10℃~50℃
sensor
Low-power
accelerome
ter
System
requirements
iOS 9.0 above / Android 5.0 above
Notices:
1. Take off your band before having shower or swimming.
2. Please connect the band when synchronizing data.
3. Use the 5V USB charging adapter.
4. Do not expose the band in high moisture or extreme high
temperatures.
Components
•Host
•Wristband
•Charging cable
•Packing box and manual
App language: English, SC, TC, Netherlands, Russian, French,
German, Portuguese, Spanish, Turkish, Japanese, Polish, Arabic,
Malaysia, Thai, Czech, Slovak.
Message Display Language: SC, TC, The European.
DE
Tragweise
Tragen Sie das Fitness-Band idealerweise wie abgebildet knapp
über dem Handgelenk. Bitte wählen Sie das Bandloch
entsprechend Ihrer Handgelenksgröße, und schließen Sie dann
die Armbandschnalle.Der Sensor sollte Kontakt zur Haut haben
und sicher sitzen.
Aufladen des Fitness-Armbands
Bitte stellen Sie sicher, dass das Band vollständig aufgeladen ist,
wenn Sie es zum ersten Mal benutzen. Bitte laden Sie das Band
auf, wenn es sich nicht einschalten lässt. Nach dem Ladevorgang
startet das Band dann automatisch.
Ein- und Ausschalten
1. Im ausgeschalteten Zustand berühren Sie bitte die
Funktionstaste ca. 4 Sekunden lang. Das Gerät vibriert beim
Start.
2. Um das Gerät auszuschalten, drücken Sie die Funktionstaste
ca. 3 Sekunden, um die Abschalt-Schnittstelle aufzurufen, und
berühren Sie sie kurz, um JA auszuwählen; das System wird
ausgeschaltet, wenn innerhalb von 3 Sekunden keine
Bedienung erfolgt.
Bedienung des Bandes
1. Berühren Sie im Einschaltmodus kurz die Funktionstaste, um
die Startseite des Bildschirms mit Datums- und
Zeitinformationen aufzurufen.
2. Auf der Startseite mit Zeit/Datum können Sie durch kurzes
Berühren der Funktionstaste auf weitere Seiten umschalten. Der
Bildschirm schaltet sich aus, wenn innerhalb von 5 Sekunden
keine Bedienung erfolgt.
3. Berühren Sie auf der Herzfrequenz/Blutdruck-Seite die
Funktionstaste lange, um die Messfunktion zu starten. Das
Ergebnis wird 50 Sekunden lang angezeigt, dann wird der
Bildschirm automatisch ausgeschaltet.
Indice
Lingue:
Altri manuali MOB Orologio
