MobileView PENTA Manuale utente
PENTA Installation Manual
UM-TR-1210
PENTA Installation Manual
© 2018 MobileView. All rights reserved. All trademarks are the
property of their respective owners.
Microsoft, Internet Explorer, and Windows are registered trademarks
of Microsoft Corporation in the United States and/or other countries.
Apple, iPad, iPhone, and iTunes are registered trademarks of Apple
Inc. Android is a trademark of Google, Inc. Other trade names used
in this document may be trademarks or registered trademarks of the
manufacturers or vendors of the respective products.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications.
You are cautioned that any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
http://www.mobileviewvideo.com
Contact Technical Support: Monday–Friday 6 am –7 pm EST
Phone: 1.844.899.7366
MobileView PENTA Installation Manual i
Content
Chapter 1 Introduction 1
About this manual 2
Product overview 2
Chapter 2 Camera installation 7
System layout 8
Camera cable guidelines 9
Installing camera assemblies 10
Chapter 3 DVR installation 19
Installation overview 20
Locating the DVR 20
Mounting the DVR 21
Wiring 22
Chapter 4 DVR configuration 41
Connecting to the DVR 43
Remote desktop connection 44
Local resources 45
Date and time settings 46
Committing DVR changes 47
System configuration 48
Deleting files after setup 64
Chapter 5 Optional hardware installation 67
Installing the accelerometer 68
Configuring the accelerometer 69
Installing an impact sensor 73
Installing a panic button 74
Installing a microphone 76
Installing a GPS unit 78
Chapter 6 Testing 79
MobileView PENTA testing 80
MobileView PENTA testing 80
Video manager program 85
Chapter 7 Troubleshooting and support 87
Troubleshooting 88
ii MobileView PENTA Installation Manual
Contacting us 89
Online resources 90
Appendix A Checklists and worksheets 91
DVR installation checklist 92
DVR viewer configuration checklist 94
Vehicle layout 97
Appendix B Templates and dimensions 101
Camera mounting plate template 102
DVR base plate 103
DVR assembly dimensions 104
Index 105
MobileView PENTA Installation Manual iii
MobileView PENTA Installation Manual 1
Chapter 1
Introduction
Summary
This chapter provides an overview of MobileView PENTA, including minimum
hardware and software requirements, and the steps you need to perform before
installing, configuring, and using MobileView PENTA.
Content
About this manual 2
Product overview 2
Retrieving and viewing images 4
Product contents 4
System requirements 5
Other requirements 5
References and related documents 6
Chapter 1: Introduction
2 MobileView PENTA Installation Manual
About this manual
The MobileView PENTA Installation Manual includes an overview of the product
and detailed instructions explaining:
•How to wire the MobileView system
•How to configure and commission the system
•How to test the system
There is also information describing how to contact technical support if you have
questions or concerns. To use this document effectively, you should have a basic
knowledge of the following:
•CCTV systems and components
•Electrical wiring
•Windows XP operating system
•TCP/IP networking
•Windows Remote Desktop protocol and file sharing
Read these instructions and all related documentation before installing or
operating this product. The most current versions of this and related
documentation are available from technical support. Refer to “Contacting us” on
page 89 for instructions on contacting technical support.
Note: A qualified service person, complying with all applicable codes, should
perform all required hardware installation.
Product overview
The MobileView PENTA digital video recording system (DVR) has two models
that support up to sixteen cameras, multichannel audio, and optional equipment
such as an impact sensor, status/tag indicator, GPS, and wireless networking
devices.
A MobileView system consists of software applications and the required
equipment. The system may also include the accessories shown in Figure 1 on
page 3.
Chapter 1: Introduction
MobileView PENTA Installation Manual 3
Figure 1: Typical MobileView PENTA system layout
1. Aluminum housing
2. Camera
3. Up to 16 cameras per DVR
4. RG179 Siamese coaxial
cable
5. GPS antenna
6. DVR assembly
7. Wireless bridge
8. Wireless antenna
9. Wireless antenna cable
10. Microphones
11. Ethernet cable
12. Panic button
13. Accelerometer
14. Impact sensor
The central component of the MobileView system is a high-quality DVR, which
records images from eight or sixteen cameras (monochrome or color) depending
on model, dual-channel audio and other information such as the time, date, and
vehicle number. You can adjust image storage capacity by changing your
recording speed, selected resolution, and drive size.
The DVR begins capturing video within 90 seconds of receiving the vehicle’s
ignition signal. It continues to capture data while that signal is present and for a
programmable shutdown delay period after the vehicle ignition signal expires.
Surveillance and event-based video data is stored on a mobile-rated, removable
hard disk drive caddy. When available storage capacity is full, the DVR
automatically overwrites the oldest data with new data in a FIFO (first-in, first-out)
fashion.
Note: Most MobileView products are not supplied with mounting hardware.
Exceptions are noted in the appropriate sections of the manual.
The MobileView solution uses Video Manager software for the review of
surveillance and event-based video stored on the DVR. Video Manager is also
Chapter 1: Introduction
4 MobileView PENTA Installation Manual
used to configure MobileView operating parameters. The Fleet Manager
application adds remote management tools to automate video download, device
health checking, e-mail notifications, and more.
Retrieving and viewing images
The DVR stores the captured digital images as monochrome or color files, which
you can download to a computer using the MobileView Video Manager software.
The DVR connects to a viewing station through a wired or wireless Ethernet
connection. The viewing station is generally a laptop or desktop PC running the
Windows XP (or Vista) Professional operating system. When you are connected
to the viewing station, you can view or observe live video and log data stored on
the DVR. You can also transfer recorded data to long-term storage media such
as DAT tapes or recordable CDs.
Note: An Ethernet crossover cable is required to connect the DVR to the viewing
station via a wired Ethernet connection.
Product contents
The MobileView PENTA system consists of a digital video recorder (DVR)
assembly that includes:
•DVR main assembly
•Removable HDD caddy and key
•Removable wiring backbox
•Mounting plate
A MobileView system can contain one or more of these accessories:
•Camera (16 maximum)
•Panic button
•Impact sensor
•Microphones
•Accelerometer
•GPS antenna
•Wireless bridge
•LCD display monitor
Inspect the package and contents for visible damage. If any components are
damaged or missing, do not use the unit. Contact the supplier immediately. If you
need to return the unit, you must ship it in the original box.
Indice
Altri manuali MobileView Registratore digitale
