Mobotix Mx2wire Manuale utente

www.mobotix.com

The HiRes Video Company

HiRes

3 Megapixel

2048 x 1536

Software zoom

Skyline

Format free

Each image format

freely deﬁnable

30 Frames/s

VGA (640 x 480)

F/s Mega

Virtual PTZ

Digital pan, tilt,

zoom

Backlight

Safe using CMOS

without mechanical iris

Internal DVR

Internal via SD card,

external via Network

Win/Lin/Mac

Recording

via Network on PC

up to 1 Terabyte

Microphone & speaker

Audio

bi-directional via IP,

variable framerates

SIP-Client with video

IP Telephony

Alarm notify,

cam remote control

VideoMotion

Multiple windows

precision pixel-based

-22°F ... +140°F

Weatherproof

- 30° ... +60°C, IP65,

no heating necessary

IEEE 802.3af

PoE

Network power

even in winter

Robust

No moving parts

ﬁber glass housing

MxCC/MxEasy

Licence free

Video-Management-

Software

Filmstrip_all.indd 3 14.05.09 08:24

Mx2wire: User Manual

HiRes Video Innovations

The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its

decentralized concept has made high-resolution video systems cost-ecient.





Latest PDF File:

www.mobotix.com > Support > Manuals

Ethernet Network With PoE



Mx2wire turns an existing two-wire cable into amodern

multimedia cable – simply, quickly and cost-eﬀectively

e.g., bell wire

e.g., coaxial cable

e.g., power cable

e.g., cat-7-cable

2



www.mobotix.com • [email protected]

Mx2wire User Manual:



Dear MOBOTIX customer,

Congratulations on your decision to select an innovative quality product ‘Made in Germany’!

The Mx2wire media converter allows you to transform a two-wire cable into a network

cable including PoE power supply in just a few minutes.

Minimal installation eﬀort is required to replace a simple door bell with a modern IP door

station, for instance. Or you can use the existing coaxial cable of an old analog camera

to replace this camera with a modern MOBOTIX HiRes camera with up to a thirty times

higher image resolution.

Please ﬁrst make sure that all components are included as listed on page 18 overview. The

manual then gives you a brief overview of the innovative product concept and presents

you with practical ways to use the Mx2wire media converter. This is followed by all the

information you need to install and operate the device.

If you have any questions, you can contact our support staﬀ at [email protected]

from Monday to Friday, 8 a.m. to 6 p.m. (German time).

We would like to thank you for your trust and wish you all the best with your new MOBOTIX

product!

Your MOBOTIX Team



We have tested the product very carefully and, instead of specifying non-recurrent peak

values, we only provide the important net data rate, which was measured over a long

period of time. However, we can provide



as various physical factors are not within the area of responsibility of MOBOTIX (sources

of interference such as machines or power cables, the condition and quality of the

cables used, etc.). The nominal data rate, connection length and power transmission

can only be individually tested and determined at the place of installation.



Never connect or handle live cables (e.g. 240V power supply) on your own; always

have a trained electrician do the installation.





www.mobotix.com • [email protected]

Information on Mx2wire

operating statuses

and the two status

LEDS (green and

orange) is provided in

Sections 3.2 and 3.3



Mx2wire transfers both data and power according to the PoE standard!

Mx2wire does not require a separate power connection!

Mx2wire uses existing telephone, power or antenna cables and therefore

eliminates the enormous amount of time and eﬀort normally required for

cabling!

Mx2wire turns an existing two-wire cable into a modern multimedia cable—

simply, quickly and cost-eﬀectively!

Mx2wire is a quality product designed and manufactured entirely in Germany!





www.mobotix.com • [email protected]

Mx2wire User Manual:



In many houses television, telephone and other distribution networks based on two-wire

cables are already installed, but no longer used. For example, a previously cable-bound

telephone system may have been replaced by an up-to-date wireless system. Existing,

unused cables can now be quickly connected to Mx2wire and transformed into network

connections throughout an entire building. An old analog camera can also be instantly

exchanged for a digital, high-resolution MOBOTIX network camera without the need for

any recabling and with all the associated beneﬁts.



• Ethernet and PoE data transfer using a two-wire cable

• Simple connection of 10/100 Mbps Ethernet devices

• No need for expensive and time-consuming installation of network cables

• Ideal for connecting PCs, WLAN DSL routers, IP cameras, IP telephones and IP door

stations

• Connected devices are supplied with up to 7 watts via PoE

• Perfect when wireless communication is not possible (due to distance to sender, thick-

ness of walls, etc.)

• Maximum data transfer range of 500 m and data rate of up to 30 Mbps (depending on

distance)

• Simple installation in standard sockets (surface- or ﬂush-mounted)

• Developed, produced and patented by MOBOTIX Germany

• Two LEDs display connection and supply statuses

• Power supplied to Mx2wire over just a standard PoE switch

• Network extension by connecting a Cat7 cable of up to 500 m in length as a two-wire

cable

5



www.mobotix.com • [email protected]



  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  



Download the latest version of this manual and other MOBOTIX manuals as PDF ﬁles

MOBOTIX, Mx2wire, MxControlCenter, MxEasy, ExtIO and CamIO are internationally

protected trademarks of MOBOTIX AG. All other brand names mentioned herein may

be trademarks or registered trademarks of the respective owners.

without notice.

Further Information:

www.mobotix.com

 Mx2wire User Manual:



www.mobotix.com • [email protected]

 

Using the Mx2wire system from MOBOTIX, an Ethernet network with PoE can be established

using existing cables up to 500 m. This means that you can utilize a two-wire cable that

is no longer in use (analog telephone line, antenna cable or bell wire, for instance) to

connect a 10/100 Mbps Ethernet device such as a PC, WLAN, IP camera, IP telephone or

IP door station without having to lay any new cables or implement any other constructional

measures. An (identical) Mx2wire unit is required at both ends of the cable, and it automatically

conﬁgures itself as either the sender or the receiver (MOBOTIX patent).

The signiﬁcant additional beneﬁt of Mx2wire is that, in addition to data, the power to

operate PoE end devices (Power over Ethernet according to the IEEE 802.3af standard, a

MOBOTIX network camera, for example) can also be transferred via the two-wire cable.

Mx2wire is supplied via PoE from the network cable that feeds in. The connected end devices

are supplied with up to 7 watts via PoE. Mx2wire does not therefore require its own power

supply, as the network distributor (switch) typically supplies power over the data cables

(PoE) so that the two Mx2wire units as well as the standard PoE end device are supplied.

Mx2wire is delivered in a standard socket frame in diﬀerent designs, however, it can also

be used with the surface-mounted socket provided.

Note

Mx2wire takes over the cable function for network and PoE, therefore, the cable cannot

be simultaneously used for power, analog telephone or antenna connection anymore.

Possible data rates

and ranges are listed

from page 8

Mx2wire requires a

PoE power supply for

its own operation

Additional network

devices for Mx2wire

and end devices are

not normally required





Mx2wire Mx2wire





PoE



PoE

















www.mobotix.com • [email protected]

 

A two-wire cable is usually a two-wire copper cable whose two wires are twisted together

(twisted pair). A classic two-wire cable is an analog telephone wire with a wire diameter of

0.8 mm, which, in terms of quality (according to the ISO/IEC 11801 standard), corresponds to

a category 1 cable for voice transmission. Mx2wire can also be operated using untwisted

cables that have at least two wires forming a physical connection between the two Mx2wire

units. Please note that the quality, length and diameter of the two-wire cable used all have

an inﬂuence on the transfer of data and the PoE output (see Section 1.2).



• Cable type: RG according to MIL-C-17 (coaxial cable)

• An analog camera can be easily exchanged for an IP camera

• Interference-free thanks to closed systems and cable shielding

• Range (at 10 Mbps): over 500m



• Cable type: JY, A2Y and YR (telephone and low-voltage cable)

• Very good availability in buildings

• Core diameter 0.6 to 0.8mm

• Range (at 10Mbps): over 200m



• Cable type: NY (installation cable)

• Widespread availability of cables

• 

• Wire cross-section max. 1.5mm

• Range (at 10Mbps): over 200m



Never connect or handle live cables (e.g. 240V power supply) on your own; always

have a trained electrician do the installation.



• Cable type: Cat7 (S/FTP, 4x2xAWG 23, 1000 MHz)

• Long range data and power transmission

• Range (at 10 Mbps): over 500 m

Sample performance

data is provided on

the following page

 Mx2wire User Manual:



www.mobotix.com • [email protected]

 

The data rates shown in the tables are net data rates, also referred to as the payload,

which are given in Mbps (1 byte = 8 bits). In contrast to the gross data rates (including the

data load for the operation of the system) that are usually provided when the performance

data of DSL connections is speciﬁed, for instance, the amount of data shown here is the

actual amount of data that is fully available to the end device operated on the Mx2wire

receiver unit. As an example, a MOBOTIX network camera only requires a data rate of

approximately 2.5 Mbps.

Notes

When long cables are used, voltage drops may make it impossible to supply end devices

with power, so a separate power supply must be provided. In other words, the data

range is generally greater than the maximum power transmission line.

Only a network patch cable with a usual maximum length of should be

connected directly to an Mx2wire unit in order to bridge the path to the next device

(switch, router, PC, PoE injector or IP camera, for example).

No provision is made by MOBOTIX for any further extension of the network, for example,

by connecting a longer network patch cable to Mx2wire.

It is also not possible to link more than two Mx2wire units.



 

  

1 0.44 W – 3.84 W

2 

3 6.49 W – 12.95 W

The tables on the next page contain sample performance data that was obtained by

MOBOTIX under real conditions and using standard benchmark test procedures.

By correctly combining

or twisting additio-

nally available wires

to form two wires or

cables, the maximum

transmission line for

data and power can be

considerably increased

Mx2wire always logs on

as a Class 0 device and

supplies end devices

with up to 7 watts of

power (up to Class 2)





www.mobotix.com • [email protected]





Antenna or Coaxial Cable

Thickness



  

0.6mm

inner conductor

Data: 30Mbps

PoE Class: 2

Data: 25Mbps

PoE Class: 1

Data: 15Mbps

PoE Class: N/A

Telephone Line and Bell Wire

Thickness



  

0.6mm Data: 25Mbps

PoE Class: 2

Data: 20 Mbps

PoE Class: 1

Data: 10 Mbps

PoE Class: N/A

0.8mm Data: 30 Mbps

PoE Class: 2

Data: 25 Mbps

PoE Class: 2

Data: 15 Mbps

PoE Class: 1

Installation Cable

Thickness



  

1.5mm2Data: 20 Mbps

PoE Class: 2

Data: 15 Mbps

PoE Class: 2

Data: 10 Mbps

PoE Class: 2

Network Installation Cable





  

Cat7 Data: 30 Mbps

PoE Class: 2

Data: 20 Mbps

PoE Class: 2

Data: 10 Mbps

PoE Class: 2

Mx2wire can also be used to extend the range of an Ethernet connection that would

otherwise be limited to just 100 m in length (between the PoE switch and end device). 







. In conjunction with Mx2wire, PoE class

2 power can be transmitted over a distance of 500 m at a data rate of approx. 10 Mbps.

Details on the

listed cable types is

provided on page 7

Please also read the

explanations and the

note on page 10

Use 2 wire-end sleeves

to connect to the two

Mx2wire connectors

Open the 4 twisted

wire pairs

Remove isolation from

the ends of all 8 wires

Combine 4x white and

4x colored

 Mx2wire User Manual:



www.mobotix.com • [email protected]

The value for the power transmission capacity of a cable of a particular thickness and

length is given as a PoE class (see table on page 8). This means that the power supply

and full functionality of a PoE end device in the speciﬁed class (1 or 2, depending on the

cable cross-section and length) is guaranteed on the Mx2wire receiver unit. The sender

is the Mx2wire unit that is supplied directly from the PoE switch.

Due to physical constraints, cables exceeding a certain length can still transfer data but

not power. When installations have no PoE-supplied end devices (PCs, for example), the

range of the two-wire cable may increase signiﬁcantly, provided that low data rates are

sucient for the application.



We have tested the product very carefully and, instead of specifying non-recurrent peak

values, we only provide the important net data rate, which was measured over a long

period of time. However, we can provide

as various physical factors are not within the area of responsibility of MOBOTIX (sources

of interference such as machines or power cables, the condition and quality of the

cables used, etc.). The nominal data rate, connection length and power transmission

can only be individually tested and determined at the place of installation.

 

When data and power are sent via the two-wire network cable, a (feeding) Mx2wire unit

functions as the sender while the other unit functions as the (data) receiver. Communication

between the Mx2wire units is possible in both directions, as the ‘sender’ and ‘receiver’

roles always conﬁgure themselves automatically.

Transmitting and

receiving in both

directions

Power can be supplied

from both sides, even

simultaneously







Mx2wire Mx2wire



 

Indice

Altri manuali Mobotix Convertitore multimediale

Mobotix

Mobotix Mx2wire+ Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente