Modern Flames INSERT FIRE 3824 Istruzioni originali

INSERT FIRE 3824

SAFETY INFORMATION AND OPERATIONS MANUAL

Read these instructions completely before beginning installation. Failure to follow them

could cause a heater malfunction resulting in serious injury and/or property damage.

WARNING: All electric heaters have hot and arcing or sparking parts inside. Do not use it

in areas where gasoline, paint or flammable liquids are or are stored.

This fireplace meets the construction and safety standards of H.U.D. for application in

manufactured homes when installed according to these instructions.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

USER INSTRUCTIONS USER INSTRUCTIONS

TABLE OF CONTENTS

Important Instructions .................................. 2

Power Data.................................................. 3

Product Dimensions .................................... 4

Box Contents............................................... 4

Unpacking and Testing................................ 5

Locating Fireplace ....................................... 5

WARNING: Improper installation, adjust-

ment, alteration, service or maintenance

can cause injury or property damage. Re-

fer to this manual. For assistance or ad-

ditional information, consult a qualified

installer.

CAUTION: Do not expose the heater to

the elements (such as rain, etc).

Do not place clothing or other flammable

material on or near firebox. Never place

any objects on the fireplace.

Carefully supervise young children when

they are in the room with fireplace.

Fireplace becomes very hot when run-

ning. Keep children and adults away

from hot surfaces to avoid burns or

clothing ignition. Fireplace will remain

hot for a time after shutdown. Allow sur-

faces to cool before touching.

Do not install fireplace directly on carpet

or similar surface which may restrict air

circulation beneath unit.

Installation .................................................. 6

Operation ................................................... 8

Frequently Asked Questions ...................... 9

Troubleshooting ......................................... 9

Cleaning and Maintenance Instructions ..... 10

Wiring Diagram .......................................... 11

IMPORTANT INSTRUCTIONS

CAUTION: In order to avoid over-

heating, do not cover the heater.

When using electrical heaters, basic precau-

tions should always be followed to reduce the

risk of fire, electric shock and injury to

persons, including the following:

1. Read all instructions before installing or

using this heater.

2. This heater is hot when in use. To avoid

burns, do not let bare skin touch hot surfaces.

Keep combustible materials, such as furniture,

pillows, bedding, papers, clothes, and curtains

at least 3 feet (0.9m) from the front of the

heater and keep them away from the sides

and rear.

3. Extreme caution is necessary when any

heater is used by or near children or invalids

and whenever the heater is left operating and

unattended.

4. Do not operate any heater after it

malfunctions. Disconnect power at service

panel and have heater inspected by a

reputable electrician before using.

5. Do not use outdoors.

6. To disconnect heater, turn controls to off

and turn off power to heater circuit at main

disconnect panel.

7. Do not insert or allow foreign objects to

enter any ventilation or exhaust opening as

this may cause an electric shock or fire, or

damage the heater.

8. To prevent a possible fire, do not block air

intakes or exhaust in any manner.

9. A heater has hot and arcing or sparking

parts inside. Do not use it in areas where

gasoline, paint or flammable vapors or liquids

are used or stored.

10.Use this heater only as described in this

manual. Any other use not recommended by

the manufacturer may cause fire, electric

shock or injury to persons.

11. This heater includes a visual alarm to warn

that parts of the heater are getting excessively

hot. If the alarm illuminates, immediately turn

POWER DATA

Insert Fire 3824

Volts/HZ Amps AC 120V/60Hz 15 Amps

Heater AC 120V/60Hz 750W/1500W

Lamps LED 12V

Rotor motor AC 120V/60Hz 4W CCW 15/18 r/min

Shipping Size 40” x 26” x 12”

USER INSTRUCTIONS

the heater off and inspect for any objects on

or adjacent to the heater that may have

blocked the airflow or otherwise caused high

temperatures to have occurred. DO NOT

OPERATE THE HEATER WITH THE ALARM

ILLUMINATING.

12.Do not operate any heater with a damaged

cord or plug or after the heater malfunctions,

has been dropped or damaged in any manner.

Return heater to authorized service facility for

examination, electrical or mechanical

adjustment, or repair.

13.This heater is not intended for use in

bathrooms, laundry areas and similar indoor

locations. Never locate heater where it may

fall into a bathtub or other water container.

14.Do not run cord under carpeting. Do not

cover cord with throw rugs, runners, or the

like. Arrange cord away from traffic area and

where it will not be tripped over.

15.Avoid the use of an extension cord

because the extension cord may overheat and

cause a risk of fire. However, if you have to

use an extension cord, the cord shall be No.

12 AWG minimum size and rated not less

than 1500 watts.

16.SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS

BOX CONTENTS

USER INSTRUCTIONS INSTALLATION

1 Fire Unit

1 Remote

PRODUCT DIMENSIONS

Insert Fire 3824—Front View

29” W x 19” H x 10 1/2” D

29” 10 1/2”

19”

Optional trim

INSTALLATION

UNPACKING AND TESTING

This heater is for use on 120 volts. The cord

has a plug as shown at A. An adapter as

shown at C is available for connecting three-

blade grounding-type plugs to two-slot recep-

tacles. The green grounding lug extending

from the adapter must be connected to a per-

manent ground such as a properly grounded

outlet box. The adapter should not be used if

a three-slot grounded receptacle is available.

CAUTION: The unit's power supply cord

must be connected to a properly

grounded and protected 120-volt outlet.

Always use ground fault protection

where required by the electrical code.

Never use an extension cord with this

product.

WARNING: Do not operate the unit if it is

damaged or has malfunctioned. If you

suspect the unit is damaged, return the

unit to an authorized service facility for

examination, electrical or mechanical ad-

justment or repair.

LOCATING FIREPLACE

CAUTION: Do not locate in a moist room such as a bathroom or laundry room.

CAUTION: Wear gloves and safety glasses for protection during installation and mainte-

nance.

This fire is designed to fit into existing fireplaces as an insert to replace a wood or gas burning fire.

This fire can also be used in cabinets or recessed wall openings.

Grounding Pin

Metal Screw

INSTALLATION INSTALLATION

INSTALLATION

WARNING - RISK OF FIRE!

The power cord must not be pinched or

against a sharp edge. Secure cord to

avoid tripping or snagging to reduce the

risk of fire, electric shock or personal in-

jury.

Do not run cord under carpeting. Do not

cover cord with throw rugs, runners or

the like. Arrange cord away from traffic

areas and where it will not be tripped

over.

WARNING - RISK OF FIRE!

To prevent a possible fire, do not block

air intake or exhaust in any manner. Do

not use on soft surfaces where openings

may become blocked.

WARNING - RISK OF FIRE!

Do not blow or place insulation against

the firebox.

Installing fireplace

Select a suitable location that is not suscep-

tible to moisture and is a safe distance from

drapes, furniture and high traffic areas. A

qualified electrician should add an electrical

outlet per local building codes. The included

power cord is 73 1/2 inches long, the outlet

should be installed within 70 inches of the rear

right corner of the fireplace.

Note: Follow all national and local electrical

codes.

WARNING: If the fireplace has a gas line

present, a plumber or fireplace technician

should cap the gas supply according to

local building codes.

WARNING: Avoid the use of an extension

cord because the extension cord may

overheat and cause a risk of fire. However,

if you have to use an extension cord, the

cord shall be No. 12 AWG minimum size

and rated not less than 1500 watts.

WARNING: If the information in these in-

structions is not followed exactly, a fire

or explosion may result causing property

damage, personal injury or death.

To reduce the risk of fire do not store or

use gasoline or other flammable vapors

in the vicinity of this or any other heater.

1. Make sure the fireplace is clean and

free of debris. Install the fire feature

according to the instructions included

with that feature (the fire features

include log set or contemporary glass

burner.) Plug in the fire unit.

2. Simply slide the fire unit in to your

existing fireplace.

3. Use the adjustable feet to adjust for

the ash bed in some fireplaces.

INSTALLATION

4. If desired, use the optional trim to trim

your new fire place.

5. To install the optional trim, remove

the 4 screws on the right and left side

that hold on the glass face. Index the

elongated screw holes on the metal

trim over the screw holes for the glass

face. Replace the screws.

OPERATION MAINTENANCE

OPERATION

On the lower right corner of the right side of the fire unit, near the power cord, is the main power

switch. Switch this on to begin using the fireplace. Directly below the flame, on the right hand side

are 3 control switches.

To begin operation touch the Power button. The flame image and fire feature will be on at full bright-

ness and the heater will be off.

The Power and Heat buttons on the

remote function in the same manner as

the buttons on the main unit. The arrow

buttons on the remote control the

brightness of the flame image and fire

feature. Pressing the up arrow will

increase the brightness of the flame

image and fire feature; pressing the

down arrow will decrease the

brightness of the flame image and fire

feature.

Pressing the Heat button will start the

heater and fan at low speed. The low

heat indicator will light. Pressing the

Heat button again will turn the heater

on high. The high heat indicator will be

lit. Pressing the Heat button once more

will turn off the heater. The indicator

lights will turn off.

Low Heat High Heat

Pressing the Flame button will cycle the brightness of the flame image and fire feature.

MAINTENANCE

FREQUENTLY ASKED QUESTIONS

Q. How do you program the remote control?

A. The remote comes pre-programmed. No programming is necessary.

Q. What distance can the remote be used from the fireplace?

A. Optimal distance for the remote control is within 10 yards.

Q. Can you turn on the fireplace via the control buttons and off via the remote (or vise versa)?

A. Yes.

Q. Low long will the LED lights last?

A. LED Lamps have a life span of up to 20 years.

Q. Can the fireplace be installed outside?

A. No. Please review the entire safety chapter before installing this fireplace.

Q. Does the fireplace need to be on a dedicated 15 amp circuit?

A. Yes.

Q. How often do the batteries in the remote need to be replaced?

A. Annually, possibly more with heavy use.

Q. Is there a remote receiver in the fireplace that requires batteries?

A. No, only the actual remote requires batteries. The rest of the fireplace runs entirely off of the

main power supply.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

A. Wiring is loose

A. Disconnect unit from power

source and inspect for loose

connections

Heater does not provide

heat when on B. Thermal snap disc has been

tripped

B. Turn unit off and unplug unit for 5

minutes. Plug back in and turn unit

on. If plug cannot be reached, reset

breaker and turn unit back on

C. Heater core is defective C. Replace Heater Core

Can operate fireplace

functions with mechanical

controls but not remote

control

A. Low Batteries A. Replace batteries in remote

control with - 2 AA batteries

B. Not aiming control correctly

B. Aim remote control to the upper

right of the viewing area where

sensor is located

C. Remote control defective C. Replace remote control

D. Remote Sensor is defective D. Replace remote sensor inside

fireplace

MAINTENANCE MAINTENANCE

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

Nothing comes on

A. Fireplace is not plugged in to an

electrical outlet A. Check plug

B. Breaker tripped or outlet has no

power

B. Reset breaker, test outlet for

power

C. Power Switch is not in the “On”

position (bottom right)

C. Turn main power switch to the

“On” position (solid white line is

flush with the fireplace)

D. Safety turnover switch is open D. Make sure that the fire unit is

installed plumb.

E. Defective component

E. Qualified service technician

needs to replace motherboard,

transformer or LCD touch control

Fireplace turns off and

will not turn back on

A. Fireplace has overheated and

safety disc has snapped or circuit

breaker has tripped

A. Turn off major power switch and

waiting 5 minutes to turn it back on

or reset circuit breaker

Flame is not visible when

unit is turned on

A. Wiring is loose

A. Disconnect unit from power

source and inspect for loose

connections

B. Motherboard is defective B. Replace motherboard

Fireplace lights up but

there is no flame image

A. Wiring for motor is loose

A. Disconnect unit from power

source and inspect for loose

connections from motor

B. Motor is defective B. Replace motor

A. Fireplace spindle/ rod is

contacting to metal

A. Apply lithium grease or any

standard grease to contacts with rod

and metal

Fireplace is squeaking

when flame image is on

B. Motor is defective B. Replace motor

CLEANING AND MAINTENANCE INSTRUCTIONS

There is very little maintenance involved with your electric fireplace. Please follow the few points be-

low:

 On a semi-annual basis unplug the machine from it’s power source and wait for the heating ele-

ment to cool, remove the glass face of the fireplace and dust the fire unit with a dry cloth. Be

careful not to brush any wires that may be exposed as you do this.

 To clean the glass face of the fireplace simply use your desired glass cleaner with paper towels.

 To clean the air inlets/outlets, wipe with a soft cloth or the nozzle of a vacuum cleaner

 Dust can easily build up around the heater area under the appliance. Take particular care to

clean this area on a regular basis to prevent buildup.

Indice

Altri manuali Modern Flames Camino da interno

Modern Flames

Modern Flames AL45CLX Istruzioni di installazione e manutenzione

Modern Flames

Modern Flames LFV2-40/15-SH Istruzioni di installazione e manutenzione

Modern Flames

Modern Flames AL 95 Manuale utente

Modern Flames

Modern Flames CEF-50B Manuale utente

Modern Flames

Modern Flames SPS-50B-AU Manuale utente

Modern Flames

Modern Flames OR52-MUTLI Manuale utente

Modern Flames

Modern Flames ORION OR26-TRAD Manuale utente

Modern Flames

Modern Flames SC36-B Istruzioni di installazione e manutenzione

Modern Flames

Modern Flames RS-2621-EU Manuale utente

Modern Flames

Modern Flames WMC LPM Series Manuale utente

Modern Flames

Modern Flames OR30-SLIM-INT Manuale utente

Modern Flames

Modern Flames RS-2621 Manuale utente

Modern Flames

Modern Flames SPECTRUM SLIMLINE SPS-50B-EU Manuale utente

Modern Flames

Modern Flames OR26-TRAD-INT Manuale utente

Modern Flames

Modern Flames Landscape Pro Slim LPS-4414V2 Manuale utente

Modern Flames

Modern Flames LPM-9616/INT Istruzioni operative

Modern Flames

Modern Flames AMBIANCE LINEAR 40 Istruzioni originali

Modern Flames

Modern Flames OR52-SLIM Manuale utente

Modern Flames

Modern Flames Landscape Pro Multi Series Istruzioni operative

Modern Flames

Modern Flames Redstone RS-2621-AU Manuale utente

Modern Flames

Modern Flames Sedona Pro multi Series Istruzioni operative

Modern Flames

Modern Flames HF900CBI Istruzioni di installazione e manutenzione

Modern Flames

Modern Flames LFV100015-SH Istruzioni di installazione e manutenzione

Modern Flames

Modern Flames LANDSCAPE FULLVIEW LFV4015-SH Manuale utente

Manuali Camino da interno popolari di altre marche

Brigantia

Brigantia 35-DVRS31N-2 Manuale del proprietario

Nordpeis

Nordpeis Bergen Manuale utente

Superior

Superior BCT2536TMN Manuale utente

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuale utente

Renaissance

Renaissance RUMFORD 1000 Manuale utente

Lacunza

Lacunza IV-800 Manuale utente

Baxi

Baxi 940 Istruzioni per l’uso

Dru

Dru Maestro 60/2 Tall RCH Manuale utente

Diamond Fireglass

Diamond Fireglass SS-O22 Manuale utente

HearthStone

HearthStone Windsor Bay 8830 Manuale di programmazione

Napoleon

Napoleon ASCENT B42 Manuale utente

Enviro

Enviro E33GI Manuale utente

Smeg

Smeg L30 FABE Istruzioni di montaggio

KEDDY

KEDDY K700 Manuale utente

Godin

Godin 3451 Manuale utente

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuale utente

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuale utente

Desa

Desa CCFPDFT Manuale operativo