ModWright Instruments Ambrose A30 Manuale utente
1
Ambrose A30
Tube Mono Block Amplifiers
Owner’s Manual
Manufactured by ModWright Instruments, Inc.
21919 399th St., Amboy, WA 98601
USA
www.modwright.com
2
PLEASE READ FIRST:
General amplifier operation:
Safe Operation:
oBefore turning the amplifiers on, be sure that speaker cables are connected to the
amp and to the speakers. The output transformers expect a load (speaker). If the
amps are turned on without a load, the amps could be damaged.
Startup:
oTo power unit up, simply depress the black button on the front top face of the
amp. When you do this, the unit will turn on and the MWI logo in the face will
light up with an incandescent glow and the tubes will warm and light up also.
oIf unit does not power up at this point, check to be sure that power plug is firmly
seated and power cord is connected to mains voltage indicated on back panel of
amplifier. US/Canada 120V, HK 220V, Europe and other countries 220V-240V.
oIf the unit still does not power up, check the fuse on the rear of the amp. It is
rated for 4A slow-blow (120V), 2A slow-blow (240V).
Fuses:
oThere is one fuse per amp, installed in an external, serviceable fuse block. We do
not recommend changing the stock fuse or stock fuse value. Doing so will void the
factory warranty.
3
General Operation:
Note: It is always recommended that you power the amplifier on last, when powering
up your audio system. When powering your audio system down, it is always
recommended to power the amplifier off first.
Operation:
oConnect the Left RCA cable from the preamp to the amplifier serving the Left
speaker and the Right RCA cable from preamp to the amplifier serving the Right
speaker.
oConnect (+) and (-) Left and (+) and (-) Right speaker cables from binding posts
on back of Left and Right amplifiers to Left and Right speakers.
Tube Bias:
oTube bias if fixed and requires no adjustment. When replacing power tubes, tubes
should be replaced as a matched septet (6), or in matched sets of three per amp.
4
Specifications:
Power Ratings:
o32W @ 6 ohms (Stereo) @ .1% THD.
Technical Specification:
oBandwidth: 20Hz - 20Khz
oGain: 22dB
oInput Impedance: 100K
Weight and Dimensions:
oDimensions: 9"W x 17"D x 10"H
oShipped Weight: 55lb (47lb net weight)
Tube Complement:
oInput: (1)12AT7 tube per mono block amplifier.
oPower: (3) EL34 tubes (matched set) per mono block amplifier.
5
Care and Cleaning:
Wood Finish:
oThe Wood portion of the enclosure is hand crafted, oiled and polished to the
highest standard. Absolutely no detergent, cleaner or wax should be used to clean
the wood surface. Only use pure lemon oil, such as Formby’s, applied in small
amounts with a soft cloth. For regular cleaning, simple buffing of the wood finish
with a dry soft cloth will suffice.
Caution: Avoid contact of lemon oil with metal.
Transformer Cover Painted Metal Finish:
oA high quality, prismatic powder coat finish is used to ‘paint’ the transformer
covers. The finish scratches easily and as a result, we polish it prior to shipping
with a protecting coating of wax. To clean, simply wipe gently with a clean, soft
cloth. You may also apply ‘Nu Finish’ to further protect the finish. This is what
is used at the factory prior to shipping.
Anodized Aluminum Top and Bottom Plate Finish:
oThese surfaces are bead blasted, anodized billet aluminum. To clean, simply wipe
with a cloth, damp with a cleaner such as Windex. Take care to only clean the
Aluminum finish this way. Do no spray cleaner directly on the aluminum.
Thank you for purchasing a ModWright Ambrose amplifier. Each
piece is handcrafted in the U.S.A. with heirloom quality materials and
craftsmanship.
6
WARRANTY:
ModWright agrees to warranty product for a period of 5 years from date of purchase from
a factory authorized ModWright Instruments Dealer.
Warranty covers parts and labor for repairs due to equipment failure not related to
customer abuse and/or neglect. Customer is responsible for shipping costs to and from
ModWright Instruments or authorized service center.
There are no user-serviceable parts inside the amplifier and evidence that someone other
than a ModWright Instruments Factory Authorized service professional has opened the
product enclosure or in any way tampered with the internal workings of the unit,
including replacement of stock fuses, will void factory warranty.
Warranty is non-transferable to second party.
7
Contact Information:
If you have any questions about ModWright Instruments products or ModWright
modifications or products, please do not hesitate to contact us via phone, e-mail or
conventional mail.
PH: 360-247-6688
ADDRESS:
ModWright Instruments, Inc.
21919 NE 399th St.
Amboy, WA 98601
United States of America
Thank you for purchasing a ModWright Instruments product.
Dan Wright,
President, Owner
ModWright Instruments, Inc.
Indice
Altri manuali ModWright Instruments Amplificatore
ModWright Instruments
ModWright Instruments KWH 225i Manuale utente
ModWright Instruments
ModWright Instruments PH 9.0 Manuale utente
ModWright Instruments
ModWright Instruments KWA 100 Manuale utente
ModWright Instruments
ModWright Instruments KWI 200 Manuale utente
ModWright Instruments
ModWright Instruments KWA 150SE Manuale utente
ModWright Instruments
ModWright Instruments LS 100 Manuale utente
ModWright Instruments
ModWright Instruments Ambrose One Manuale utente
ModWright Instruments
ModWright Instruments LS 300 Manuale utente
