Moeller PS 416-CPU-x00 Series Manuale utente
Hardware and Engineering
PS 416-CPU-x00
Central Unit
PS 416-POW-4x0
Power Supply Card
PS 416-BGT-4xx
Rack
02/98 AWB 27-1208 GB
3rd edition 02/98
© Moeller GmbH, Bonn
Author: Werner Albrecht
Editor: Thomas Kracht
Translator: Terence Osborn
For Immediate Delivery call KMParts.com at (866) 595-9616
Caution!
Dangerous electrical voltage!
Before commencing the installation
●Disconnect the power supply of the
device.
●Ensure that the device cannot be
accidentally restarted.
●Verify isolation from the supply.
●Earth and short circuit.
●Cover or enclose neighbouring units that
are live.
●Follow the engineering instructions
(AWA) of the device concerned.
●Only suitably qualified personnel may
work on this device/system.
●Before installation and before touching
the device ensure that you are free of
electrostatic charge.
●Connecting cables and signal lines
should be installed so that inductive or
capacitive interference do not impair the
automation functions.
●Install automation devices and related
operating elements in such a way that
they are well protected against
unintentional operation.
●Suitable safety hardware and software
measures should be implemented for
the I/O interface so that a line or wire
breakage on the signal side does not
result in undefined states in the
automation devices.
●Ensure a reliable electrical isolation of
the low voltage for the 24 volt supply.
Only use power supply units complying
with IEC 60 364-4-41 or HD 384.4.41 S2.
●Deviations of the mains voltage from the
rated value must not exceed the
tolerance limits given in the
specifications, otherwise this may cause
malfunction and dangerous operation.
●Emergency stop devices complying with
IEC/EN 60 204-1 must be effective in all
operating modes of the automation
devices. Unlatching the emergency-stop
devices must not cause uncontrolled
operation or restart.
●Devices that are designed for mounting
in housings or control cabinets must only
be operated and controlled after they
have been installed with the housing
closed. Desktop or portable units must
only be operated and controlled in
enclosed housings.
●Measures should be taken to ensure the
proper restart of programs interrupted
after a voltage dip or failure. This should
not cause dangerous operating states
even for a short time. If necessary,
emergency-stop devices should be
implemented.
IBM is a registered trademark of International
Business Machines Corporation.
All other brand and product names are
trademarks or registered trademarks of the
owner concerned.
All rights reserved, including those of the
translation.
No part of this manual may be reproduced in
any form (printed, photocopy, microfilm or
any otherprocess) or processed, duplicated
or distributed by means of electronic
systems without written permission of
Moeller GmbH, Bonn.
Subject to alterations without notice.
For Immediate Delivery call KMParts.com at (866) 595-9616
II
02/98 AWB 27-1208-GB
List of revisions to AWB 27-1208-GB
Edition Page Revision new Rev. n. a.
02/98 PS 416-CPU-200/-300 ҂
For Immediate Delivery call KMParts.com at (866) 595-9616
1
02/98 AWB 27-1208-GB
PS 416 system PS 416-POW-4x0PS 416-BGT-4.. AppendixPS 416-CPU-200/-300/-400
Contents
About the manual 3
PS 416 system 5
PS 416-BGT-4.. racks 21
PS 416-POW-400/410/420
Power supply cards 35
PS 416-CPU-200/-300/-400 Central unit 57
Appendix 129
Index 141
For Immediate Delivery call KMParts.com at (866) 595-9616
2
02/98 AWB 27-1208-GB
For Immediate Delivery call KMParts.com at (866) 595-9616
3
02/98 AWB 27-1208-GB
About This Manual
The rack, power supply card and the central
processing unit form the basis of the PS 416 system.
Their tasks and functions are described in this
manual.
There are various cards which you can integrate in
the modular system, depending on the requirements.
The functions of these cards are described in
separate manuals.
The communication between the stations in a
networked system is carried out via network cards.
These are the PS 416-CPU-300/-400 or the Suconet
K PS 416-NET-400 card if the stations are linked via
Suconet K. These cards manage the access to local
or remote input/output cards. This function is
explained in the “Suconet K Interface”manual
(AWB 27-1210-GB).
The Sucosoft S 40 programming software is used for
programming and configuration and is also
described in a separate documentation.
For Immediate Delivery call KMParts.com at (866) 595-9616
4
02/98 AWB 27-1208-GB
For Immediate Delivery call KMParts.com at (866) 595-9616
5
PS 416 system
02/98 AWB 27-1208-GB
PS 416 System
Contents
1 System Description 7
Setup 7
Hardware/software requirements 7
Components 8
2 Configuration 11
Master 12
Slaves for remote I/O expansion 13
Intelligent slaves 15
3 Engineering 17
Electromagnetic compatibility (EMC) 17
Reaction times 17
Interference immunity 17
For Immediate Delivery call KMParts.com at (866) 595-9616
6
02/98 AWB 27-1208-GB
For Immediate Delivery call KMParts.com at (866) 595-9616
7
02/98 AWB 27-1208-GB
PS 416 system
1 System Description
Setup The PS 416 is a modular programmable controller.
The rack with an internal bus system for signal
transfer and slots for the connections of cards form
the basic unit. Interference-free supply cards supply
the system with a stabilised voltage. A central
processing unit with universal functions manages the
access to local and/or remote input/output cards or
enables an application process to be run separately
in the same rack. Various cards can be used for
detecting digital, analog and counter signals.
Networking and communication are implemented via
standard interfaces or standard bus protocols. The
Moeller Suconet K bus protocol is used as a system
bus for connecting remote inputs/outputs or an
expander rack. The Sucosoft S 40 software package
forms the user interface for user-friendly
programming, testing and commissioning.
Hardware/software
requirements
A P S416 system has the following minimum
requirements:
For Immediate Delivery call KMParts.com at (866) 595-9616
Questo manuale è adatto per i seguenti modelli
15
Indice
Altri manuali Moeller Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
