Molekule Air Mini+ Manuale utente
Molekule Air Mini+
User Manual
Save for later reading
Try it in the bedroom.
Molekule Air Mini+ will work in any room, but giving it space in a central location,
and on a shelf, stand, or table will help maximize air intake. It’s designed for rooms
under 250 sq. ft. We recommend running it in the bedroom, closer to your bed at
night for a clean, sleep-breathing zone.
Run it 24/7.
Molekule Air Mini+ uses low energy to keep fresh air flowing.
01
Best Practices
Setting Up
02
Twist off shell and
pull out filter.
Unwrap filter and
place on base.
Align logo on shell with
arrow on base. Close shell
and twist to lock.
Unwind cord and
plug in.
Once WiFi light is
pulsing, you’re ready to
pair to the app.
Download the app to
complete setup and set
up device control from
your phone.
Manual Mode
Your device’s five fan speeds correspond to the number of dotted white lights.
Tapping the button cycles through speeds and Auto Protect.
Silent
Low
Medium
High
Boost
Speed Indicators
03
There’s just one button. It’s on top, in the center of the display. Tap it to wake the
device, and cycle through fan speeds and Auto Protect. A long press of 3 seconds
puts it on standby, which deactivates the fan, UV-A lights, and display lights.
Controls & Interface
04
Modes & States
Auto Protect
Your Air Mini+ has a sensor to measure airborne particulate matter levels.
Auto Protect uses these levels to regulate fan speed for optimal air purification.
Press here
Auto Protect
Fan speeds
PECO-Filter status
Particulate matter levels
WiFi status
PECO-Filter Status
The PECO-Filter status indicator helps you track the replacement schedule for your
PECO-Filter.
• Authentication
Each time you plug in your device or lock its shell into place, it checks the
authenticity of the PECO-Filter. A pulsing white light indicates it’s in progress.
A green light indicates it’s confirmed as a certified Molekule PECO-Filter and
will run normally. A red light indicates the PECO-Filter has not been verified
and the device will not start.
• Off
If the PECO-Filter status indicator is off, there’s no need to replace your
PECO-Filter.
• Orange
An orange light indicates your PECO-Filter is nearing recommended
replacement time.
• Red
A red light indicates your PECO-Filter has reached recommended
replacement time. Replace the existing PECO-Filter.
• Flashing red & white
Flashing red-and-white lights indicate your PECO-Filter should be replaced
immediately because it has exceeded its recommended replacement time.
The device will go on standby, the PECO-Filter status indicator will flash red,
and the fan speed lights will pulse white as a reminder to replace.You can
restart Molekule Air Mini+ by tapping the center button on top of your device.
Molekule Air Mini+ will repeatedly go on standby after extended use until the
PECO-Filter is replaced.
WiFi Status
• Upon powering the device (after setup), this indicator will pulse white while it
searches for a connection.
• If it turns green, it has connected successfully.
• A red WiFi status indicator means an issue with your WiFi is prohibiting your
Molekule Air Mini+ from connecting.
• If this indicator is off, there are no issues with your WiFi.
• If it stops pulsing and turns solid white, it’s paired to your phone, but hasn’t
been connected to WiFi.
The sensor in Air Mini+ is designed to detect particles, giving you a window into
the air quality of the room it’s operating in, to help maintain clean air. By using a
light-sensitive detector, the sensor gauges the concentration of particles in the air
in front of it.
Inhaling particles, also known as particulate matter, can be harmful to many
people. But there’s more to air pollution than just particles. While the Air Mini+
particle sensor doesn’t measure other types of pollution like ozone, VOCs, and some
allergens, you can rest assured that the unique PECO technology at the core of your
device is working to destroy them.
What Molekule Air Mini+ Senses in the Air A Window into your Air
05
Inorganic
Gases Microbes Allergens VOCs
Bioaerosols
Particles Organic
Sensor’s range of detection
Particle sensor
Particle Levels
06
Understanding Auto Protect and particle levels
Auto Protect uses the particle sensor to take automatic readings of the air in
front of it and adjusts fan speed for optimal air purification in the room in which
it’s running. Based on the density of particles it detects in that room, the sensor
triggers a colored light to appear on the very center of your device’s display. It’s
important to note that air pollution is more than just particles. While your device
may show a low level of particles in the air, the presence of other pollutants would
remain undetected by the particle sensor.
Molekule’s particle levels
The scale and color levels on your Molekule Air Mini+ measure particle concentration
on a four-tiered scale. Your device sensor is designed only to reflect the presence
of particles in a cross section of your air, not the overall air quality, which would
be based on measurements of many different types of air pollutants. A “Good”
reading on your device may mean a low volume of particles detected in the air, but
air pollution is complex and based on hundreds of factors. As such, the presence
of other pollutants would remain undetected by the device’s particle sensor, which
could affect overall air quality. The recommendations on the following pages are
based solely on the levels of particles detected by the sensor.
Good Moderate Bad Very bad
Your Air Mini+ is detecting a low level of
particles in the room.
We suggest running your device on
Auto Protect or at the lowest fan speed.
Your Air Mini+ is detecting a moderate
level of particles in the room.
We suggest running your device on
Auto Protect or increase fan speed
to continue cleaning the air.
Your Air Mini+ is detecting a high level
of particles in the room.
We suggest running your device on
Auto Protect or increase fan speed
to continue cleaning the air.
Good Moderate Bad
Your Air Mini+ is detecting a very high
level of particles in the room.
We suggest running your device on
Auto Protect or increase fan to the
highest speed to continue cleaning
the air in the room.
Very bad
Particle levels
How do I replace the filter?
07
User Servicing Instructions
With the base on a steady surface,
twist device shell counterclockwise
and lift to open.
Remove new PECO-Filter from
packaging and place onto base with
small hole face down, as indicated
on PECO-Filter.
Lift used PECO-Filter off device
base and discard.
Place device shell back onto base
and twist clockwise to click into
place. Good work.
Altri manuali per Air Mini+
2
Indice
Altri manuali Molekule Purificatore d'aria
