Momentum Niro Manuale utente
QUICK START GUIDE
Niro
Download the Momentum App from the
Apple App Store or Google Play.
Connect your mobile device Wi-Fi to the
network you want your camera to be
paired to.
Important: Make sure the app you
download matches the same logo as
shown above.
Step 1: Download the app
Sign up for a new account.
Once you’ve finished entering your
information,you will receive an email
verification link.
Click on the email link toactivate your
account.
Return to the app and sign in.
Step 2: Create an Account
Connect the Micro-USB cable to the
back of the camera and the power
adapter.
Plug in the power adapter to an outlet.
Micro-USB
Power Port
Step 3: Plug in Niro
IMPORTANT: Make sure yourmobile device
is connected to the Wi-Fi network.
From the Momentum app,select Pair
Device.
Selectthe Garage Door Controller from
the list of devices.
Go to your mobile device’s Wi-Fi settings.
Connectto the ‘MOGA-001’ Wi-Fi
network.
Step 4: Pair Niro
Go back to the Momentum App.
Your Wi-Fi network will autoload,so you
will justneed to enter your network
password.
(If your Wi-Fi network did not show up,
that means your mobiledevice was not
connected to it prior to pairing. See ‘Step 1’
for details.)
Step 5: Connect to Wi-Fi Network
It’s recommended to have Niro
mounted hanging upside down from
the bottom of your garage opener.
You may use the provided sticker and
metal plate to attach the device.
Step 6: Mount Niro
Method 1
Method
2
Unplug your garage opener.
Locate your garage wall remote console.
You should see some wires that come
outof it that lead all the way to
terminals on the back of your garage
opener.
Note:If you’re stillunsure which terminals to
connect the wires to, please refer to your
garage door opener’s instruction manual to
verify.
Step 7: Connect Wires to GDO
Note: Your ports may look different from this image.
Connect Niro’s wires into the same wire
ports as your garage wall remote
console. This may require loosening the
tabs or screws depending on your garage
opener model.
Twist the two wires together into each
terminal for a better connection,
however make sure the wall console
wires go into their original terminals.
Step 7: (continued)
Press tabs to
release
Insertthe other end of the wires intothe
1st and 2nd terminals on the back of the
Niro device. You may need to use a tool
to push down on the buttons to release
and insert the wires.
Note: Both wiresare neutral,so it doesn’t
matter which color wire goes into whichof the
two ports. However, make sure the open wire
ends are not touching each other.
Step 8: Connect Wires to Niro
Altri manuali per Niro
1
Indice
Altri manuali Momentum Controllori
