Monark Scooter 662 Manuale utente

EN
MANUAL
kickbikes


Congratulations on your new kickbike! �������� 5
Assembly / Adjustment ����������������������������������� 6
Assembly ��������������������������������������������������������������� 6
Handlebar adjustment�������������������������������������������� 6
Assembly instruction kickbike 634 ��������������� 7
Assembly instruction kickbike 662 ��������������� 8
Assembly instruction kickbike 672 ��������������� 9
Safety precautions ���������������������������������������� 10
Screws and nuts �������������������������������������������������� 10
Brakes������������������������������������������������������������������ 10
Front fork and Frame ������������������������������������������� 10
Wheels ����������������������������������������������������������������� 10
Handlebar ������������������������������������������������������������ 10
Steering head bearing������������������������������������������ 10
Any questions? ��������������������������������������������������� 10
User instructions ������������������������������������������� 10
To think of ������������������������������������������������������������ 10
Braking technique ������������������������������������������������ 10
Maintenance �������������������������������������������������� 11
General care advice��������������������������������������������� 11
Steering head bearing������������������������������������������ 11
V-brake����������������������������������������������������������������� 11
Spare parts model 634 ���������������������������������� 12
Spare parts model 662 ���������������������������������� 13
Spare parts model 672 ���������������������������������� 14
Notes �������������������������������������������������������������� 15
2017 MONARK EXERCISE AB, Vansbro, Sweden
Contents
Important
Read the manual carefully before using the cycle and
save it for future use.

Monark Kickbikes
4
The year was 1910.
It was then the first Kroon bike was manufactured.
The location was Vansbro in Dalarna.
Today, Monark has taken over production of Kroon transport bikes and
specialized bikes.
Design, development and manufacturing are still in Vansbro in an ultra-
modern factory, in which, the Monark world leader ergometer bikes also are
produced. It is a genuine craftmanship, quality thinking and proud traditions
that characterize the classical cycle
Monark bike is a good hard worker, a workhorse that can withstand hard
and tough and ensures long life.
Monark's bike is a unique product that is available in a variety of designs.
Everything from the good old errand-boy's model, scooters, flatbed bikes,
handicap bikes, tandem bikes to the famous post man's bike.
The Monark bike is an affordable, reliable and smart transportation for those
who are in need of simple, fast and efficient deliveries.

Monark Kickbikes
5
Congratulations on your new kickbike!
You have purchased a quality product that we are confident that
you will get great pleasure from.
Even quality products require maintenance and must be checked
and adjusted periodically. If you do that, you get more joy out of your
kickbike for a long time and, above all, safety in order.
This manual gives you a set of general guidelines for setting,
adjustment and maintenance. Before using your kickbike, please read
this manual.
This manual is not model specific, so we ask you to refer to the text
related to your kickbike.
If you are unsure, ask your dealer and / or let they maintain your
kickbike. Under all circumstances we recommend that you let your
dealer maintain and repair all vital parts of the kickbike.

Monark Kickbikes
6
Fig: Handlebar adjustment
Assembly / Adjustment
Assembly
Assemble your kickbike according to the installation
instructions for your specific model, see pages 7-9.
The handlebar stem must be recessed
so that the height position mark is not
visible.
Stem
(expander bolt)
Handlebar adjustment
Handlebar assembled on a traditional stem is raised
and lowered by loosening the expander bolt on the
stem and unscrew it about 5 mm. Tap the expander
bolt using a plastic mallet to loosen the expander cone.
The handlebar can now be set to the desired position.
Tighten the expander bolt when the handlebar is in
place. See Fig: Handlebar adjustment.
Note! It is important that the MAX / STOP mark on
the stem is not exceeded. In addition to the security
risk, the frame can be damaged.
Max / stop mark
stem

Monark Kickbikes
7
NOTE!
Tightening torque 24 Nm for all screws.
Assembly instruction kickbike 634

4 x M8x16
1 2
4
4 x M8
3
1 x M8x45 1 x M8 1 x M8
Monark Kickbikes
8
Assembly instruction kickbike 662

2 x M8x50
2 x M8
4 x M8
24 Nm
OK!
Monark Kickbikes
9
Assembly instruction kickbike 672

Monark Kickbikes
10
Safety precautions
Check your kickbike regularly, partly to make any
necessary adjustments, and partly to familiarize
yourself with the bike.
Screws and nuts
All screws and nuts must be re-tightened at regular
intervals. Pay particular attention to wheel nuts.
Brakes
Check the brakes before each use.
Front fork and Frame
Check that the front fork and frame are not deformed.
At the first sign of damage, contact immediately a
professional for check.
Wheels
Spin the wheels and make sure they are not warped
or otherwise damaged. Check that the front wheel is
securely attached. Lift up the front of the bike and
hit the top of the tyre with your hand. If there is any
movement, check attachment. Feel for play in the
bearings by rocking the wheels back and forth.
Handlebar
Ensure that the handlebars and handlebar stem are
securely tightened. Replace worn grips and make sure
that they are securely attached to the handlebars and
cannot be rotated. The handlebar stem must not be
positioned so that the "MAX" mark is visible!
Steering head bearing
The lock nut must be tightened and the steering-head
bearing must not have any play. The handlebars must
move freely.
Any questions?
Contact a professional if you have any questions about
the above points or if in doubt about the function of
any of the parts.
Braking technique
1. Adapt your speed and distance in relation to other
vehicles, so that you are able to brake to a standstill
safely, even in variable conditions.
2. Remember that the largest proportion of the
braking effect comes from the front brake. Cross-
braking using only the front brake can result in that
the rear wheel are lifting and you can risk losing
control of the kickbike and you can fall.
3. A loaded kickbike takes longer time to brake! If
you pack full of goods on the kickbike, remember
to start braking earlier than normal and to dispense
braking performance carefully, so that you always
have control of the kickbike with the load. Also
remember that the steering response and balance are
affected with loads on the kickbike.
Find out the maximum load for your kickbike and
never overload your kickbike!
4. If any of the following occurs, stop immediately
using your kickbike and consult a professional for
check and repair.
• If any unusual noises are heard when the brakes
are in use.
• If the braking effect is unusually strong.
• If the braking effect is unusually weak.
User instructions
To think of
We recommend that you keep both hands on the
handlebars while using your kickbike. This is for that
kickbikes can have a tendency to become wobbly if
you only have one hand on the handlebars.
Questo manuale è adatto per i seguenti modelli
2
Indice

















