Monoprice 11501 Manuale utente
3
DEVICE DRIVER INSTALLATION
You must install the device driver for your Mac to recognize the Docking
Station and utilize all of its features. This section illustrates the steps needed
to install the drivers to a Mac running OS X 10.7.x (Lion). Installation to other
OS X versions is very similar.
IMPORTANT NOTE!! DO NOT connect the Docking Station to your Mac until
instructed to do so. The device driver cannot be properly installed if the
Docking Station is connected.
Step 1
Insert the Driver CD into the CD-ROM drive and run the LAN95xx.pkg
to start installing the LAN drivers.
Step 2
Click “Continue”to proceed.
4
Step 3
Click “Continue”to proceed.
Step 4
Click “Agree”to proceed.
5
Step5
Click “Continue”to proceed.
Step 6
Click “Install”to proceed.
6
Step 7
Type in your password and click “OK”.
Step8
Installation is proceeding….
7
Step 9
Installation of the LAN drivers is complete.Click “Close”.
Step 10
Open the dmg file on the disc to reveal two installation packages.
Double click the pkg file that matches your OS X version (ML=Mountain
Lion, SL=Snow Leopard).
8
Step 11
Click “Continue”to proceed.
Step 12
Click “Continue”to proceed.
9
Step 13
Click “Install”to proceed.
Step 14
Type in your password and click “OK”.
10
Step 15
Click “Continue Installation”.
Step 16
Installation is proceeding…This will take a few minutes.
Altri manuali per 11501
1
Indice
Altri manuali Monoprice Stazione di attracco
Monoprice
Monoprice MP-022FM Manuale utente
Monoprice
Monoprice Thunderbolt 3 Manuale utente
Monoprice
Monoprice 5146 Manuale utente
Monoprice
Monoprice Thenderbolt 3 Dual DisplayPort Manuale utente
Monoprice
Monoprice 44834 Manuale utente
Monoprice
Monoprice 44735 Manuale utente
Monoprice
Monoprice 11501 Manuale utente
Monoprice
Monoprice 29434 Manuale utente
Monoprice
Monoprice Thunderbolt 36656 Manuale utente
