Monoprice Dark Matter 42772 Manuale utente

34" Ultrawide Gaming Monitor

P/N 42772, 43246

User's Manual

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra

attention to these safety warnings and guidelines. Please keep this manual

in a safe place for future reference.

•This device is intended for indoor use only.

•Do not expose this device to water or moisture of any kind. Do not

place drinks or other containers with moisture on or near the

device. If moisture does get in or on the device, immediately

remove it from its power source and allow it to fully dry before

reapplying power.

•Do not touch the device, the power cord, or any other connected

cables with wet hands.

•Do not expose this device to excessive vibration, extreme force,

shock, or fluctuations in temperature or humidity.

•Do not expose this device to excessively high temperatures. Do not

place it in, on, or near a heat source, such as a fireplace, stove,

radiator, etc. Do not leave it in direct sunlight.

•Do not place or install this device in an area where it can be

exposed to excessive amounts of dust, humidity, oil, smoke, or

combustible vapors.

•Do not block the ventilation holes in the monitor's casing. Do not

place the monitor in a confined space with inadequate ventilation.

Periodically check the ventilation holes to ensure they do not

become clogged with dust, debris, or nearby items.

•This device uses a grounded power cord and requires a ground

connection for safe operation. Ensure that the power source has a

proper ground connection. Do not modify the plug or use a

"cheater" plug to bypass the ground connection.

•Unplug this device from the power source when not in use.

•Take care to prevent damage to the power cord. Do not allow it to

become crimped, pinched, walked on, or become tangled with

other cords. Ensure that the power cord does not present a

tripping hazard.

•Never unplug the unit by pulling on the power cord. Always grasp

the connector head or adapter body.

•Clean using a soft, dry cloth only. Do not use chemical cleaners,

solvents, or detergents. For stubborn deposits, moisten the cloth

with warm water.

•This monitor has no user serviceable parts. Do not open the case or

otherwise attempt to modify this monitor.

•Do not leave a single image on the display for a long period of

time. Doing so could cause "burn-in" of the image. It is

recommended to use a variable desktop background and to use a

screen saver to prevent "burn-in". Alternatively, ensure that the

monitor is powered off for at least 2 hours out of every 12.

•Keep the original foam packaging material for use when installing

or removing the included stand.

FEATURES

•2x HDMI® 2.0, and 2x DisplayPort® 1.4a video inputs

•3440 x 1440p @ 144Hz maximum video resolution

•21:9 aspect ratio

•Quantum LCD display

•4ms response time (MPRT 1ms)

•3000:1 contrast ratio

•Up to 400 cd/m² brightness

•178° horizontal and vertical viewing angles

•Supports Adaptive Sync technology

•Supports Picture-in-Picture (PiP) and Picture-by-Picture (PbP)

display modes

•75 x 75 VESA® mounting pattern

SYSTEM REQUIREMENTS

Operating System: Windows® 7/8/10 64-bit or higher

Processor (CPU): Intel® Core™ i5 or AMD Phenom™ II X3 or higher

Graphics Card: NVIDIA® GeForce® GTX950 or AMD Radeon™ R9 380 or

higher

Memory: 6GB RAM

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that

your ordering, purchasing, and delivery experience is second to none. If you

have any problem with your order, please give us an opportunity to make it

right. You can contact a Monoprice Customer Service representative

through the Live Chat link on our website www.monoprice.com or via email

at support@monoprice.com. Check the website for support times and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the

items listed below. If anything is missing or damaged, please contact

Monoprice Customer Service for a replacement.

1x 34" Ultrawide Gaming Monitor

1x DisplayPort® Cable

1x Stand Stem

1x Stand Base

3x M5x11 Screws

4x Wall Mount Screws

1x AC Power Cable

1x User's Manual

PRODUCT OVERVIEW

Controls

1. MENU: If the OSD menu is not displayed, press the MENU button to

access the OSD menu. If the OSD menu is displayed, press the

MENU button to enter a submenu. If editing a value, press the

MENU button to save the edited value.

2. DOWN: If the OSD menu is displayed, press the DOWN button to

move the menu highlight down. If editing a value in the OSD menu,

press the DOWN button to decrease the value.

3. UP: If the OSD menu is displayed, press the UP button to move the

menu highlight up. If editing a value in the OSD menu, press the UP

button to increase the value. If the OSD menu is not displayed,

press the UP button to toggle the FPS gaming crosshairs in the

middle of the screen on or off and to cycle through the four

different crosshair styles.

4. EXIT: If a submenu in the OSD menu is displayed, press the EXIT

button to go back to the previous menu level. If the top level of

the OSD menu is displayed, press the EXIT button to close the OSD

menu. If editing a value in the OSD menu, press the EXIT button to

cancel any changes made and exit editing.

5. POWER: Press the POWER button to turn the monitor on or off.

6. LED INDICATOR: If the LED INDICATOR is solid blue, the monitor is

powered on and is operating normally. The LED INDICATOR flashes

blue when there is no video source, no horizontal or vertical signal

is detected, or the voltage is low. If it flashes blue, ensure that your

computer is on, that it isn't in sleep mode, and that all video cables

are fully inserted and/or properly connected.

Connections

7. AC POWER SOCKET: IEC 60320 C14 panel connector for connecting

the included AC Power Cable.

8. AUDIO: 3.5mm audio output for connecting headphones, powered

speakers, etc.

9. DISPLAYPORT: Two DisplayPort® 1.4a video inputs.

10. HDMI: Two HDMI® 2.0 video inputs.

INSTALLING THE STAND

Perform the following steps to assemble the stand and attach it to the

monitor.

1. Remove the foam packaging from the box, then place it face down

on a table or other flat surface.

2. Remove all accessories from the packaging and set them aside.

3. Remove the back half of the foam packaging to reveal the back of

the monitor.

4. Attach the Stand Base to the Stand Stem using one of the included

M5x11 Screws.

5. Press the button on the Adapter Plate, then remove it from the

back of the monitor.

6. Attach the Adapter Plate to the Stand Assembly using two of the

included M5x11 Screws.

7. Reattach the Adapter Plate to the back of the monitor.

8. Remove the monitor from the foam packaging and stand it on a

flat surface.

9. Reassemble the foam packaging and place it back in the box. Keep

the box and foam packaging in a safe place for future use.

REMOVING THE STAND

Perform the following steps to remove the installed stand.

1. Remove the foam packaging from the box, then place the front

half face down on a flat surface.

2. Place the monitor with the attached stand face down in the front

half of the foam packaging.

3. Press the button on the Adapter Plate, then remove the Adapter

Plate and Stand Assembly from the monitor.

INSTALLING A MOUNT

Perform the following steps to attach the monitor to a wall or desk mount.

1. If the stand has been installed on the monitor, perform the steps in

the

REMOVING THE STAND

section above. Otherwise, press the

button on the Adapter Plate, then remove it from the back of the

monitor.

2. Screw the 4 included Wall Mount Screws into the VESA® mount

holes on the back of the monitor.

3. Attach the monitor to an assembled wall mount or desk mount

(available separately) using the hardware that was included with

the mount.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Monoprice Monitor

Monoprice

Monoprice 24657 Manuale utente

Monoprice

Monoprice Crystal Pro 44029 Manuale utente

Monoprice

Monoprice 30602 Manuale utente

Monoprice

Monoprice 37924 Manuale utente

Monoprice

Monoprice 31005 Manuale utente

Monoprice

Monoprice Dark Matter H3C2R-HQ Manuale utente

Monoprice

Monoprice 10707 Manuale utente

Monoprice

Monoprice 43020 Manuale utente

Monoprice

Monoprice 38576 Manuale utente

Monoprice

Monoprice 10734 Manuale utente

Monoprice

Monoprice DARK MATTER 45548 Manuale utente

Monoprice

Monoprice 30618 Manuale utente

Monoprice

Monoprice 10509 Manuale utente

Monoprice

Monoprice 34in CrystalPro Curved 1000R VA Panel Manuale utente

Monoprice

Monoprice 12520 Manuale utente

Monoprice

Monoprice 15481 Manuale utente

Monoprice

Monoprice 34711 Manuale utente

Monoprice

Monoprice Zero-G 31004 Manuale utente

Monoprice

Monoprice 18545 Manuale utente

Monoprice

Monoprice 24659 Manuale utente

Monoprice

Monoprice 12077 Manuale utente

Monoprice

Monoprice 13809 Manuale utente

Monoprice

Monoprice 12178 Manuale utente

Monoprice

Monoprice 33822 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione