Monoprice Zero-G 31004 Manuale utente

MP Zero-G 27" WQHD 144Hz TN-LED Monitor

with AMD FreeSync™

P/N 31004

User's Manual

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these

safety warnings and guidelines. Please keep this manual in a safe place for future reference.

This device is intended for indoor use only.

Do not expose this device to water or moisture of any kind. Do not place drinks or

other containers with moisture on or near the device. If moisture does get in or on

the device, immediately unplug it from the power outlet and allow it to fully dry

before reapplying power.

Do not touch the device, the power cord, or any other connected cables with wet

hands.

Do not place the monitor on an unstable surface where it could fall and cause either

personal injury or damage to the monitor and/or other equipment.

Do not subject the product to extreme force, shock, or fluctuations in temperature

or humidity.

Do not expose this device to excessively high temperatures. Do not place it in, on,

or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct

sunlight.

This device ventilates excessive heat through the slots and openings in the case. Do

not block or cover these openings. Ensure that the device is in an open area where

it can get sufficient airflow to keep from overheating.

Do not place or install this device in an area where it can be exposed to excessive

amounts of dust, humidity, oil, smoke, or combustible vapors.

Prior to operation, check the unit and power cord for physical damage. Do not use if

physical damage has occurred.

Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

Take care to prevent damage to the power cord. Do not allow it to become

crimped, pinched, walked on, or become tangled with other cords. Ensure that the

power cord does not present a tripping hazard.

Never unplug the unit by pulling on the power cord. Always grasp the connector

head or adapter body.

Ensure that power is turned off and disconnected before making any electrical

connections.

Remove the batteries from the controller if it will go unused for a lengthy period of

time.

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or

detergents. For stubborn deposits, moisten the cloth with warm water.

This monitor has no user serviceable parts. Do not open the case or otherwise

attempt to modify this monitor.

Do not leave a single image on the display for a long period of time. Doing so could

cause "burn-in" of the image. It is recommended to use a variable desktop

background and to use a screen saver to prevent "burn-in". Alternatively, ensure

that the monitor is powered off for at least 2 hours out of every 12.

FEATURES

Three HDMI® and one DisplayPort inputs

2560 x 1440p @ 144Hz maximum video resolution

Fully compliant with the HDMI 2.0 and DisplayPort 1.2 specifications

1ms GTG response time

170° vertical and 160° horizontal viewing angles

500,000:1 dynamic contrast ratio

350 cd/m² brightness

More than 16.7 million colors

Includes IR remote control

Supports AMD FreeSync™ 1.3

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-

6pm PT) or via email at [email protected]

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x 27" Monitor

1x Stand Base

2x Stand Legs

6x Stand Screws

1x High Speed HDMI® Cable

1x AC Power Adapter

1x AC Power Cord

1x IR Remote Control

2x AAA Batteries

1x User's Manual

PRODUCT OVERVIEW

Input Panel

AUDIO OUT: 3.5mm stereo analog audio output.

HDMI 1: HDMI® video input supporting the HDMI 1.4 specification at resolutions up to

2560 x 1440p @ 60Hz.

HDMI 2: HDMI® video input supporting the HDMI 1.4 specification at resolutions up to

2560 x 1440p @ 60Hz.

HDMI 3: HDMI video input supporting the HDMI 2.0 specification at resolutions up to

2560 x 1440p @ 144Hz.

DP 1: DisplayPort video input supporting the DisplayPort 1.3 specification at resolutions

up to 2560 x 1440p @ 144Hz.

DC IN: DC barrel connector for connecting the included AC power adapter.

Front

Rear

Keypad

1. MENU: If the OSD menu is not displayed, press the MENU button to display the OSD

menu. If the OSD menu is displayed, press the MENU button to select the

highlighted function.

2. SELECT: Press the SELECT button to select the video input.

3. V.+: If the OSD menu is not displayed, press the V.+ button to increase the volume

level. If the OSD menu is being displayed, press the V.+ button to move the

highlight to the right.

4. V.-: If the OSD menu is not displayed, press the V.-button to decrease the volume

level. If the OSD menu is being displayed, press the V.-button to move the highlight

to the left.

5. ▲: If the OSD menu is not displayed, press the ▲button to adjust the aspect ratio.

If the OSD menu is displayed, press the ▲button to move the highlight up.

6. ▼: If the OSD menu is not displayed, press the ▼button to cycle through the

crosshair modes. If the OSD menu is displayed, press the ▼button to move the

highlight down.

7. : Press the button to turn the monitor on or to put it in standby mode.

Remote Control

Turns the monitor on or puts it into standby mode.

Selects the video input.

Turns audio muting on or off.

Selects the image aspect ratio.

Up selects the channel.

Down selects the channel. Quick enter for target crosshairs.

Decreases the volume level.

Increases the volume level.

Displays the source.

Enters the OSD menu.

Exits the OSD menu.

Quick enter for low blue mode.

Quick enter for ECO mode.

Quick enter for sleep mode.

INPUT SOURCE MENU

Press the SELECT button on the Keypad to display the Input

Source Menu.

Use the ▲and ▼buttons to move the highlight to the

desired input.

Press the V.-button or wait 3 seconds to select the

highlighted input.

Select the AUTO option allow the monitor to automatically

switch to the active input.

INSTALLING THE STAND

Unless you will be using a wall or desk mount, you will need to install the stand before you

can use the monitor. Perform the following steps to install the stand.

1. Using two of the included Stand Screws, attach the two Stand Legs to the Stand

Base, as shown in the images below.

2. Place the box that the monitor came in on a flat surface, then spread a towel or

blanket on top of the box.

3. Place the monitor face down on the covered box, then attach the Stand Base to the

back of the monitor using the four remaining Stand Screws, as shown in the images

below.

INSTALLATION

1. Ensure that all equipment to be connected is powered off and unplugged from their

power sources.

2. Place the monitor it its intended location.

3. Using the included High Speed HDMI® Cable, plug one end into one of the HDMI

inputs on the monitor, then plug the other end into the HDMI output on your PC.

Note that HDMI 3 supports the HDMI 2.0 specification at up to 144Hz refresh rate,

while HDMI 1 and HDMI 2 support the HDMI 1.4 specification at up to 60Hz refresh

rate.

4. Plug the DC barrel connector on the included AC Power Adapter into the DC IN jack

on the Input Panel.

5. Plug the included AC Power Cord into the C14 connector on the AC Power Adapter,

then plug the other end into a nearby AC power outlet.

OSD MENU MAP

Main Menu

Item

Sub Menu

Item

Option

Function

BRIGHTNESS

0~100

Level can be adjusted from 0 to 100

CONTRAST

0~100

Level can be adjusted from 0 to 100

BLACK LEVEL

0~100

Level can be adjusted from 0 to 100

ECO

STANDARD

Choose the picture mode.

TEXT

GAME

MOVIE

ECO

FPS1

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Monoprice Monitor

Monoprice

Monoprice 24656 Manuale utente

Monoprice

Monoprice 37923 Manuale utente

Monoprice

Monoprice 10489 Manuale utente

Monoprice

Monoprice 18545 Manuale utente

Monoprice

Monoprice Dark Matter 42772 Manuale utente

Monoprice

Monoprice 38577 Manuale utente

Monoprice

Monoprice 16384 Manuale utente

Monoprice

Monoprice 11996 Manuale utente

Monoprice

Monoprice 10707 Manuale utente

Monoprice

Monoprice 24657 Manuale utente

Monoprice

Monoprice 34in CrystalPro Curved 1000R VA Panel Manuale utente

Monoprice

Monoprice 38576 Manuale utente

Monoprice

Monoprice 24659 Manuale utente

Monoprice

Monoprice DARK MATTER 44710 Manuale utente

Monoprice

Monoprice 27771 Manuale utente

Monoprice

Monoprice 12077 Manuale utente

Monoprice

Monoprice 38035 Manuale utente

Monoprice

Monoprice 6960 Manuale di istruzioni

Monoprice

Monoprice 15481 Manuale utente

Monoprice

Monoprice DARK MATTER 45548 Manuale utente

Monoprice

Monoprice 12178 Manuale utente

Monoprice

Monoprice Dark Matter 44632 Manuale utente

Monoprice

Monoprice 43021 Manuale utente

Monoprice

Monoprice 33821 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione