Monster ARYOND A24 V1.1 Manuale utente
USER MANUAL
KULLANIM KILAVUZU
MANUAL DE USUARIO
MANUEL DE L’UTILISATEUR
MANUALE UTENTE
BENUTZERHANDBUCH
24 Flat Fast IPS Gaming Monitor
A24 V1.1
EN
02
lmportant Safety Precautions
• Please read all the instructions carefully before using this product.
• BE SURE TO unplug the power cord when cleaning LCD. Never clean it with liquid
detergent or spraying detergent, but wipe it with wet soft cloth. lf it is stili not clean,
please use special detergent for LCD.
• DO NOT use accessories not authorized by the manufacturer, other wise they may
incur danger.
• When disconnecting the power cord of display or power adapter, always remember
to hold the plug instead of puling the wire to unplug the power cord.
• Keep the display away from water sources such as bath tub, washbasin, sink or
washing machine.DO NOT place the display on wet oor or near a swimming pool,
or press LCD surface with ngers or hard objects.
• The grooves and openings on the back and bottom of the shell are for ventilation
purpose and also for guaranteeing the re!iability of the elements and preventing
them from overheating; in order to prevent the vents from blocking; DO NOT place
the display on bed, sofa, carpet or other similar surfaces; DO NOT place the display
near to or on heat radiator or heater; DO NOT put the display into embedded device,
unless it is provided with adequate ventilating equipment.
• Only the type of power source indicated on the nameplate applies to this display.
lf you have any questions on the type of power source you use, please consult the
dealer of the display or loca[ administration of power supply.
• Since there is high voltage or other risks when the shell is opened or moved, please
DO NOT repair the display by yourself, but request qualied maintenance sta to
carry out.
• in one of the following cases, please unplug the display or the power adapter and
ask qualied maintenance sta for help:
a. The power cord or the plug is impaired or worn.
b. The display fal Is o or the shell is damaged.
c. The display is obviously abnormal.
• Please place the display in a cool, dry and well ventilated place.
• Store the display in temperature range of -10°C~60°C, beyond which the display
may be damaged permanently.
EN
03
Product Description
lnstallation and Connection
Please check the following items in the packing case before installation:
• One LCD display (including the base)
• One HDMI cord, one power cord, one AC adaptor
• One user manual, one warranty card.
lf any of above items is missing, please contact with the dealer.
Attention: Accessories shall be subject to the real conguration.
Please keep ali packing materials well for product transport in the future.
• This machine should be installed adjacent ta an easily pluggable
AC power socket.
• Far the sake of safety, we suggest that suitable wall-mounted bracket ar
base be used.
• in order ta prevent injury, this machine shall be placed on a stable
and level surface ar xed on a rm wall.
• Far wall-mounting, please ask a professional to do so. lmproper
installation may cause instability of this machine.
• DO NOT place this machine in places with mechanical vibration.
• DO NOT place this machine in places where insects are accessible.
• DO NOT install this machine directly opposite ta air-conditioner,
otherwise its inner panel may bedewed and cause failure.
• DO NOT place this machine in places with strong electromagnetic eld,
otherwise it may be interfered by the electromagnetic wave and get
damaged.
Packing list
Display installation
EN
04
Mounted on wall Mounted on base
Wall Wall
Block Ventilation Block Ventilation
Connect the signal line tooutput
interfaces signal of DP/HDMI signals
of PC, and then connect the other end
of the signal line tothe corresponding
signal in put port of the display.
This machine supports earphone and
external speaker audio output.
Signal line connection
Audio output
• Please reserve some placeas indicated in the gure around the display.
• Never cover the vents or insert any object into the shell.
• D0 NOT place this machine in conned space such as book case or
embedded closet, unless such space is well ventilated.
Ventilation
DC HDMI2HDMI1 DP1 DP2 EARPHONE
EN
05
Operation of Display
The OSD control buttons are shown as the gure. Models of the same product series
are only dierent in button position and panel pattern, please refer to the practical
model.
When the display is working normally, the blue indicator light is on; when it is in the
energy saving state, the indicator light blinks with red color; when the signals are sent
again in the energy saving state, the machine will return to normal work; After the
display is turneci o,the indicator light is o. Asthe display is stili poweredunder the
shutdown state, for the sake of safety, the power cord should be unplugged when the
display is not used.
lnitial state:
Power indicator light
lntroduction to rocker functions
Power indicator light
Rocker
Rocker Up Signal source input
Rocker Down Volume adjustment shortcut key
Rocker Left Game plus shortcut key
Rocker Right Preset shortcut key
Press Rocker Short press to start/display menu, press and hold for
3second to turn o the machine.
EN
06
Enter the function menu:
Move up/Adjust value
Move down/Adjust value
Return to previous menu
Enter/Conrm
Cancel/Press and hold for 3s to turn o the machine
When the video signals of PC exceeds the frequency range of the display,
the horizontal and eld synchronizing signals will be shut down to protect the display.
Then, you have to set the PC output frequency to an acceptable range so as to make
the display work normally.
Safety protection
Basic Troubleshooting
Phenomenon Troubleshooting
Light out/power indicator
light is o
lmage blurring, over-large,
over-small, etc.
lmage over dark
Display over heat
Dark/ light spots when
powering on
lmage distortion,
blinking, shaking
Power o noise
Rocker Up
Rocker Down
Rocker Left
Rocker Right
Press Rocker
Check whether the display and the socket are well connected to power, and whether the
display is in the shutdown mode.
Enter the menu “lmage Setting” and select “Auto lmageAdjust” to automatically
adjust the display. {For VGA models only)
Enter the menu “Brightness and Contrast” to adjust the brightness and contrast of the
display.
Leave at least 5cm of distance for ventilation around the display and do not place articles
on the display.
It is a normal phenomenon caused by display discharging in the process of powering o.
Check computer setting, select the correct resolution and re-adjust the refresh frequency.
This is a normal phenomenon. it is due to the backlight illuminates unevenly at the initial
phase of powering on caused by temperature dierence. The backlight can illuminates
normally after 20 minutes, and then the dark/light spots will be corrected.
EN
07
Technical Specications of Product
Power supply management system
Panel size 23.8’’
Product has been led on China energy label website Yes
Optimal working resolution 1920×1080@144Hz
Blue-light ltering Support
Power input DC 12V = 4.5A
Flicker-free Support
Requirements for working environment
Working altitude
Working temperature and humidity
Warehousing temperature and humidity
5000m
0° C~40°C 20%~85%
-10°C~60°C 10%~90%
Packing size (L * W * T) and weight
Unpacked size {L * W * T) (with base)
Packing size (L * W * T)
Net weight
Gross weight
539.94×206.58×486.47mm
630×175×490mm
4.15Kg
6.00Kg
Mode Power consumption
Normal working 36W
Standby 0.5W
Remarks: All technical specications in this manual and external packages are subject
to change without further netice. in case that there is subtle dierence between this
manual and practical operation, please follow practical operation.
The terms HDMI and HDMI High-Denition Multimedia lnterface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
EN
08
lnstruction of Base lnstallation
• 1. Take out the base support and remove the hand screws;
• 2. Insert the base into the support and rotate it clockwise to place;
• 3. Lock the hand screw removed in step 1 into the base screw hole and tighten it;
• 4. Align the mounting hole of the base with the VESA hole of the machine, and lock
four M4 * 8 screws.
1.
3.
2.
4.
EN
09
Language Settings
Display English
Language
1920x1080
MOVE BACK ENTER
144Hz
144Hz
FPS
FreeSync/G-Sync
Color German
OSD Setup
Gaming Setup Turkish
Audio
Input Spanish
Reset
System Set Français
User Data Italian
Polish
• 1. Press the Multi-Function Power button to open the system menu.
• 2. Move the multi-function power button down to access the “System Set” eld
on the menu. Move the multi-function power button to the right to access the
“Language” eld. Select any language you want.
DE
10
BENUTZERHANDBUCH
24 Flat Fast IPS Gaming Monitor
A24 V1.1
Indice
Lingue:
Altri manuali Monster Monitor
