Monster MINI ORB Manuale utente

MODEL MLB7-1043

V2.0 1020

Operation Manual

INDOOR/OUTDOOR

RECHARGEABLE

MULTI-COLOR LED MINI ORB

with IR Remote Control

Features

What’s Included

Introduction

• Water-resistant LED Mini Orb is great for both indoor

and outdoor and use

• Integrated rechargeable battery provides over 4hrs of

light (time varies by lighting color/mode)

• Sleek, stylish design accents any décor

• Multi-color and dimmable LED lighting effects with

Flashing and Fading color-changing modes

• Remote control works up to 26ft/8m away

• Charge from any USB power source (not included)

This Indoor/Outdoor Rechargeable Multi-Color LED Mini

Orb is portable, easy to use, and is ideal for adding

controllable ambient lighting to any space indoors or out.

• Indoor/Outdoor Rechargeable Multi-Color LED Mini Orb

• IR Remote Control with battery

• USB Charging Cable

• User Manual x1 pc

Safety

Instructions

Please read and understand all instructions before using

this product. If damage is caused by failure to follow the

instructions, this warranty is null and void.

• Keep these instructions.

• Do not drop, puncture, or disassemble this product.

• For water-resistance, keep the silicon USB cover tightly

sealed.

• Avoid long exposure to direct sunlight, which may cause

damage.

• Do not expose this product to open flames.

• Do not use the product in a strong magnetic field.

• Use a clean, soft cloth to clean. Do not use any corrosive

cleaners/oils to clean.

• Do not attempt to repair the device or open the unit as this

will void the warranty.

Get Started/

Charging

The LED Mini Orb has a built-in rechargeable battery that can be

charged using the included micro USB to USB Type-A cable and

any 5v USB power source (not included).

For best results, charge before use.

NOTE: Under normal operation, the Orb will provide over 4.5hrs

of light. Solid colors, lower brightness, and fewer adjustments

can extend the battery life considerably.

Open the USB cover and insert the charging cable

While charging, the LED will glow Red

When charging is complete, the LED will turn OFF

To keep water-resistant, keep the USB cover closed

securely when not charging

Folding Handle/Hanging Loop

The LED Mini Orb features a fold-out ring on the bottom that

can be used to carry or hang the product, allowing you to use

it in more ways and more locations.

• Do not hang the Mini Orb by the USB charging cable.

• Fold away the handle/hanging loop when not in use.

• Do not drop this product.

Specifications

• LED Mini Orb Input (USB): 5V 0.5A

• Battery Life: 4.5hrs

• Charge Time: 2.5hrs

• Standby Time: 400hrs

• USB Charging Cable Length: 3ft

• Remote Control: 3V

(1 x 3V battery, type CR2025)

MODEL MLB7-1043

V2.0 1020

Operation Manual

①

②

③

④

⑤

⑥

⑦

⑧

Controls, at a Glance

OFF

COLOR SELECTORS

WHITE

FADE

FLASH

RESET

DIMMER BUTTONS

Turn the product on

Turn the product off

Change the color to match your mood

Change the color to white

Fade color-changing mode

Flash color-changing mode

Reset to default settings

Adjust the brightness/intensity

⑧

⑤

①

③

④

⑦

IR Remote LED Mini Orb (bottom)

Power/Mode button

hanging loop

USB charging cover/port

②

⑥

Button

Operation

FLASH

FADE

RED

GREEN

BLUE

WHITE

STANDBY

quickly flashes through the color spectrum

smoothly flows through the color spectrum

solid color

LEDs are off, IR sensor remains active

In STANDBY mode the LEDs will be off but the IR sensor will

remain active so that the Mini Orb can respond to the IR remote.

If the Mini Orb is turned OFF it must first be reactivated

manually before the remote will work.

Note: If left in Standby Mode for an extended period of time,

the battery may become depleted and you may need to

charge the device.

Standby Mode

Turn on the LED Mini Orb by pressing the Power/Mode

button on the bottom of the device (it will turn on into the

last used lighting mode)

Continuously pressing the Mode button will cycle through

the following lighting modes:

At any time, press and hold the Power/Mode button to turn

OFF the LED Mini Orb

IR Remote

Operation

Changing the remote control battery:

Note: The Mini Orb can only respond to the remote control if

it is ON or in STANDBY mode.

The battery for the remote control has already been installed.

Remove the battery pull tab to operate.

Turn on the LED Light by pushing the ON button on the

remote control

Select the desired color of the desired effect by pushing

the corresponding button on the remote control

Set the desired brightness using the buttons to

increase/decrease the intensity of color

Push the OFF button to turn off the LED Light

The battery compartment is located on the narrow side of

the remote control

Remove the empty battery and insert a 3V battery, type

CR2025, with the positive terminal pointing upwards

Place the battery compartment back in the remote control

so it locks in place

The illustrated products and speciﬁcations may dier slightly from those supplied.

The M Monster logo is a registered trademark of Monster, Inc. or its subsidiaries in the

U.S. and other countries and are used under license. All other brand names are

trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc.

is aliated with the respective owners of their trademarks. Licensed and

Manufactured by Jem Accessories, Inc. South Plainﬁeld, NJ 07080. Made in China.

Customer

Service

1 Year Limited Warranty

[email protected]

866-246-2008

Warning

FCC Statement

FCC Radio Frequency Exposure Statement

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s warranty or authority

to operate the equipment.

In the event this product becomes defective,

please do not return this product to your retailer.

This device complies with Part 15 of the FCC Rules. Operation is

subject to following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure

requirements. The device can be used in fixed or mobile condition.

The minimum separation distance is 20cm.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Monster Luce esterna

Monster

Monster MLB7-1046-RGB Manuale utente

Manuali Luce esterna popolari di altre marche

Sealey

Sealey LED37 Manuale utente

nordlux

nordlux VEJERS Guida utente

SImx

SImx ELITE LED LHTC637 Manuale utente

GEV

GEV CAROLINE 10833 Manuale utente

NEBO

NEBO NEB-LSP-0020 Manuale utente

WE-EF

WE-EF PFL540 LED Manuale utente

Lindby

Lindby 9949029 Manuale utente

HEPER

HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento

HEPER

HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento

Maretti

Maretti VIBE S 14.6080.04.A Manuale utente

BEGA

BEGA 84 253 Manuale

HEPER

HEPER MINIMO Istruzioni per l'installazione e il funzionamento

LIGMAN

LIGMAN BAMBOO 3 Manuale utente

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuale utente

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuale utente

urban ambiance

urban ambiance UQL1273 Manuale utente

TotalPond

TotalPond 52238 Manuale utente

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuale utente