Morphy Richards 403040 Manuale utente
FP403040 MUK Rev 2
Please read and keep these instructions for future use
Table Blender
* Register online for your 2 year guarantee. See back of this instruction book for details. (UK and reland customers only)
www.facebook.com/morphyrichardsuk
@loveyourmorphy
www.morphyrichards.co.uk/blog
For competitions, product hints and tips
and more join us at
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 1
2
n addition, we offer the following safety advice.
ocation
•Do not use outdoors or in a bathroom.
•Always locate your appliance away from the edge of the
worktop.
•Do not place the jug used with the appliance on a highly
polished wooden surface as damage may occur to the
surface.
Mains cable
•Do not let the mains cable hang over the edge of the
worktop where a child could reach it.
•Do not let the lead run across an open space e.g.
between a low socket and a table.
•Do not let the cable run across a cooker or other hot area
which might damage the cable.
•The mains cable should reach from the socket to the
base unit without straining the connections.
•The power cord cannot be replaced. Contact Morphy
Richards for advice.
Other safety considerations
•Do not use the appliance for anything other than its
intended purpose.
•The use of attachments or tools not recommended or
sold by Morphy Richards may cause fire, electric shock
or injury.
•WARN NG: Misuse of appliance could cause personal
injury.
Product specific safety
•MPORTANT: Allow hot liquids to cool before adding to
the blender, always ensure the lid is fitted correctly.
•Be careful if hot liquid is poured into the blender as it can
be ejected out of the appliance due to sudden steaming.
•Do not use the appliance if the plastic jug or lid is
damaged or has visible cracks.
Electrical requirements
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity supply
which must be A.C. (Alternating Current).
Should the fuse in the mains plug require changing,
a 5amp BS1362 fuse must be fitted.
WARNING: This appliance must be earthed.
The use of any electrical appliance requires the following common sense safety rules.
Please read these instructions carefully before using the product.
•This appliance can be used by persons with reduced physical,
sensory or mental capabilities, or lack of experience and
knowledge, if they have been given supervision or instruction
concerning the use of the appliance in a safe way and understand
the hazards involved.
•This appliance shall not be used by children.
•Children shall not play with the appliance.
•Keep appliance and cord out of the reach of children.
•CAUT ON: Ensure that the blender is switched off before
removing it from the stand or approaching parts that move in use.
•Do not blend for longer than the time periods recommended in
the ‘Operating chart’ on page 7.
•Avoid touching moving parts. Keep hands, hair and
clothing, and utensils away from the blender blades
during operation, to prevent personal injury and/or
damage to the appliance.
•Always disconnect the blender from the supply if it is left
unattended and before assembling, disassembling or cleaning.
•Care shall be taken when handling the sharp cutting blades,
emptying the jug and during cleaning.
•For care & cleaning refer to page 10.
Health And Safety
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 2
3
Health And Safety ......................................................... 2
Introduction .................................................................. 3
Total Control ................................................................. 4
Product Overview ........................................................ 5
Before First Use ........................................................... 6
Using Your Table Blender - Manual Control ............... 6
Using Your Table Blender - Preset Programs ............ 8
Top Tips ....................................................................... 10
Care And Cleaning ....................................................... 10
Operating Chart ........................................................... 11
Recipes ......................................................................... 12
Contact Us ................................................................... 22
Notes ............................................................................ 22
Guarantee ..................................................................... 24
Contents
Thank you for your recent purchase of this Morphy Richards
Total Control Table Blender
Remember to visit www.morphyrichards.co.uk to register your
product’s two year guarantee.
Introduction
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 3
4
ntroducing the Total Control Table Blender is a versatile fusion of practical design
and smart response technology, designed to give users the power to create with
confidence.
Thanks to Smart Response Technology, this intelligent table blender delivers
exactly the right amount of power for a variety of food preparation tasks.
The 4 preset programs give unparalleled assistance for dips, smoothies, soups,
sauces and ice, completely removing the guesswork from blending.
5 speeds and a pulse function help maintain total control throughout. And the
extra-large 1.5 litre capacity allows users to make plenty of delicious drinks,
soups and sauces.
The table blender’s easy store plug is a tidy storage solution.
Total Control Table Blender gives users the power to create with confidence.
Giving you the power to create with confidence
1.5L Working Capacity
Pre-program settings
Integrated cord storage
Stainless Steel Serrator Blades
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 4
5
Features
(1) Measuring Cup
(2) Lid
(3) Pouring Hole
(4) Spout
(5) Plastic Jug
(6) Blade
(7) Base Unit
(8) Control Dial
(9) Pulse Function
(10) Cable Storage
(11) Preset Dips & Sauces
(12) Preset Smoothies
(13) Preset ce Crushing
(14) Preset Soup & Sauces
(15) Plug Storage (on rear)
(16) On/Off Switch
5
2
4
1
6
15
16
7
8
12 13 1411
9
3
1
2
Rear of the Base Unit
10
Product Overview
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 5
6
4
Plug the Total Control Table Blender into the
mains socket & switch on (16).
3
Place the Lid (2) on the Plastic Jug (5),
pushing down firmly. Place the Measuring
Cup (1) into place twisting clockwise to lock
into place. To avoid spillages ensure the
pouring hole in the Lid (2) is turned away from
the Spout (4).
2
Place the food or cold liquids into the
Plastic Jug (5). Do not exceed more than the
recommended amount (see page 11).
1
Place the Plastic Jug (5) onto the
Base Unit (7).
•Carefully unpack your Table Blender as the
Blending Blades are very sharp.
•Remove any stickers (except for the serial label
on the base of the product).
•Carefully wash the Jug, Lid and Measuring Cup
in hot soapy water. Rinse and dry.
•Wipe over the Base Unit with a damp cloth.
•WARNING: Never immerse the Base Unit in
water or in any other liquid. Always ensure the
electrical connections are kept dry. This may be
wiped with a clean, damp cloth.
Before First Use
Using Your Total Control Table
Blender - Manual Control
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 6
7
8
Remove the Plastic Jug (5) from the
Base Unit (7).
7
Switch off (16) and unplug from the mains
socket before serving.
10
To use the flow control lift Lid (2) and
reposition as required below.
9
To pour, remove the Lid (2) and pour out of the
spout (4) .
1212
Turn to the gridded filter in the Lid (2) to prevent
any large pieces from flowing through
if present.
11
Turn to the large filter in the Lid (2) for a full
flow.
6
To use the Pulse function (9) turn the Control
Dial (8) to P. Do not use for prolonged
periods of time.
5
Turn the Control Dial (8) to 1 to start blending.
ncrease the speed as required.
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 7
8
Using the preset
programs
4
To avoid spillages ensure the pouring hole in
the Lid (2) is turned away from the Spout (4)
see page 7. Plug the Total Control Table
Blender into the mains socket & switch on
(16).
3
Place the Lid (2) on the Plastic Jug (5),
pushing down firmly. Place the Measuring
Cup (1) into place twisting clockwise to lock
into place.
2
Place the food or cold liquids into the Plastic
Jug (5). Do not exceed more than the
recommended amount (see page 11).
1
Place the Plastic Jug (5) onto the
Base Unit (7).
5
6
Select Dips & Sauces button (11) on the
Preset Programs for smooth dips, sauces,
batters and icecream. A blue light will come
on around the button, this light will stay on
until the program is complete. PLEASE NOTE:
The program may pause for several seconds.
Do not remove the Plastic Jug (5) or Lid (2)
until the light has gone off.
Select Smoothies button (12) on the Preset
Programs for delicious healthy smoothies. A
blue light will come on around the button, this
light will stay on until the program is
complete. PLEASE NOTE: The program may
pause for several seconds. Do not remove the
Plastic Jug (5) or Lid (2) until the light has
gone off.
WARNING: DO NOT ADD INGREDIENTS
OR REMOVE THE ID WHI ST THE
PROGRAMME IS RUNNING.
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 8
9
10
Remove the Plastic Jug (5) from the
Base Unit (7).
9
Switch off (16) and unplug from the mains
socket before serving.
12
To use the flow control lift Lid (2) and
reposition as required below.
11
To pour, remove the Lid (2) and pour out of the
Spout (4) .
14
Turn to the gridded filter in the Lid (2) to prevent
any large pieces from flowing through
if present.
13
Turn to the large filter in the Lid (2) for
a full flow.
7
8
Select ce Crushing button (13) on the Preset
Programs for flavoured slushies. A blue light
will come on around the button, this light will
stay on until the program is complete.
PLEASE NOTE: The program may pause for
several seconds. Do not remove the Plastic
Jug (5) or Lid (2) until the light has gone off.
Select Soup & Sauces button (14) on the
Preset Programs for nutritious soups and
sauces. A blue light will come on around the
button, this light will stay on until the program
is complete. PLEASE NOTE: The program may
pause for several seconds. Do not remove the
Plastic Jug (5) or Lid (2) until the light has
gone off.
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 9
10
DO NOT ADD BOI ING WATER/VERY HOT
IQUID TO THE JUG. A OW TO COO FIRST.
•The Measuring Cup (1) can be used to measure
small quantities of liquid.
1Pour the liquid through the Pouring Hole (3)
in the Lid (2).
2Place the Measuring Cup (1) back in the Lid (2),
twisting to lock/unlock. Then proceed with your
blending.
•Follow the procedure in the ‘Using your Total
Control Table Blender section, replacing food with
the ice cubes to be crushed.
•Select ce Crushing Button (13) on the
Preset Programs.
•Note: The maximum capacity for ice crushing at
any one time is 500ml.
Use your Blender for soups, sauces, drinks,
pates, mayonnaise, dressing etc.
•Do not put dry ingredients into the Blender
without addition of other wet ingredients or liquid.
•When blending, pour the liquids in first and then
add the solid food. Begin blending at the lower
speed and increase when needed.
MPORTANT: To ensure the long life of your
blender when using the Manual Speed Settings
never run it for longer than 60 seconds and allow
to cool for 5 minutes. Switch off as soon as you
have reached the desired consistency.
•The machine will not work if the Plastic Jug (5)
is fitted incorrectly.
•Don’t use the Plastic Jug as a storage container.
Keep it empty when not in use.
•Never blend more than 1 litre (13⁄4pints) -
of frothy liquids, such as milk shakes.
•f using a max of 1.5L do not use any higher than
speed 2.
•When blending soup do not fill over the
1 Litre mark.
•Do not overfill the blender. This could cause
damage to the motor. The plug fuse will blow if
the blender is overloaded. Replace the fuse and
do not exceed the maximum recommended
volumes. Refer to the ‘Operating chart’
on page 11.
•Before cleaning and maintenance, switch the
appliance off and unplug it, remove the
Plastic Jug (5) from the Base Unit (7).
•After use, fill the Plastic Jug (5) with 1L (13⁄4pints)
of warm water and run for 30 seconds on the
pulse setting and repeat as necessary. Never use
abrasives or cream cleaners.
•Clean the Base Unit (7) with a damp cloth or
kitchen paper roll.
•There is a facility to wrap your power cable
around the base of the product and fit the plug
into the Plug Storage (15).
•Reassemble the Total Control Table Blender by
carefully placing the Plastic Jug (5) on the Base
Unit (7), ensuring it fits correctly.
•WARNING : Never immerse the Base Unit in
water.
•WARNING: If any liquid is spilt in the top of the
Base Unit, switch off and unplug from the
socket and dry with a cloth.
Crushing Ice
Top Tips Care And Cleaning
Measuring Cup
IMPORTANT
FP403040 REV 2.qxp_La out 1 25/01/2019 11:48 Page 10
Altri manuali per 403040
1
Indice
Altri manuali Morphy Richards Miscelatore
Morphy Richards
Morphy Richards Easyblend Deluxe Manuale utente
Morphy Richards
Morphy Richards Saute & Soup 501014 Manuale utente
Morphy Richards
Morphy Richards Accents 48987 Manuale utente
Morphy Richards
Morphy Richards Accents Serrator Blade Manuale utente
Morphy Richards
Morphy Richards Total Control Manuale utente
Morphy Richards
Morphy Richards BLENDER - MANUAL 3 Manuale utente
Morphy Richards
Morphy Richards soupmaker Manuale utente
Morphy Richards
Morphy Richards Accents 48544 Manuale utente
Morphy Richards
Morphy Richards clarity soupmaker Manuale utente
Morphy Richards
Morphy Richards Total Control Manuale utente
Morphy Richards
Morphy Richards HAND BLENDER 48959 - AUTRE Manuale utente
Morphy Richards
Morphy Richards Duo Magic Manuale utente
Morphy Richards
Morphy Richards Soup Maker Clarity Manuale utente
Morphy Richards
Morphy Richards Total Control Manuale utente
Morphy Richards
Morphy Richards Nutri Fusion Manuale utente
Morphy Richards
Morphy Richards Smooth Manuale utente
Morphy Richards
Morphy Richards Total Control Manuale utente
Morphy Richards
Morphy Richards Soup Maker Compact Manuale utente
Morphy Richards
Morphy Richards Compact Food Processor Manuale utente
Morphy Richards
Morphy Richards Blender Manuale utente
