Morphy Richards IB70535 Manuale utente

Steam cleaner with attachments

Please read and keep these instructions

www.morphyrichards.com

getting the best from your

new steam cleaner...

•Quick start

1Fill the tank up to a maximum of 1.0 litre of water (using warm

water will reduce heat-up time). Screw cap on and tighten fully.

2Attach the required accessories.

3Connect to the power supply.

4Press the on/off button to start heat-up. When orange light

turns off, the steam is ready.

5Press the trigger on the handle to release the steam.

6Aim the steam safely: Note at the start water may be ejected.

Hold over a sink or bucket until excess water has cleared.

• Descale

Descale regularly, do not wait for a problem to occur. In very

hard water areas we recommend using distilled water. See

page 10 for descaling instructions.

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 1

Important safety

instructions

The use of any electrical appliance

requires the following common sense safety

rules.

Primarily there is danger of injury or

death and secondly the danger of damage

to the appliance. These are indicated in the

text by the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance!

In addition we offer the following safety

advice.

Location

•Do not use or keep this product outside

when it is raining.

•Do not store the appliance near hot

ovens or heating appliances.

Children

•Children do not understand the dangers

associated with operating electrical

appliances. Never allow children to use

this appliance.

Personal safety

•The plug must be removed from the wall

socket before cleaning, filling the boiler

or maintaining the appliance.

•To protect against fire, electric shock

and personal injury do not immerse cord,

plug or cleaner in water or other liquid.

•Do not discharge the steam towards

people. Danger of scalding.

•Never touch the plug or cable with wet

hands.

•Never modify the cleaner in any way.

•When using the machine always keep it

horizontal.

•Steam must not be directed towards

equipment containing electrical

components, such as the interior of

ovens.

Other safety considerations

•Do not use any chemical detergents,

perfumes, alcohol etc in the water.

•Repairs to electrical appliances are only

to be undertaken by trained personnel.

Unprofessional repairs can be dangerous

for users.

•Use only genuine Morphy Richards spare

parts and accessories.

•If the electrical cable becomes damaged

the complete cable assembly must be

replaced. Do not attempt this task

yourself, contact Morphy Richards using

the replacement parts number on the

front of this leaflet.

•The appliance must never be left running

when unsupervised.

•This steam cleaner is intended for

domestic use only. Misuse or use for

commercial or any other purpose will

render the guarantee invalid.

Electrical requirements

Check that the voltage on the rating

plate of your unit corresponds with your

house electricity which must be A.C.

(alternating current).

If the socket outlets in your home are

not suitable for the plug supplied with this

appliance the plug should be removed and

the appropriate one fitted.

WARNING: The plug removed from

the mains lead, if severed, must be

destroyed as a plug with a bared

flexible cord is hazardous if engaged

into a live socket outlet.

WARNING: This appliance must be

earthed.

Should the fuse in the 13 amp plug

require changing a 13 amp BS1362 fuse

must be fitted.

When using this appliance outdoors it

should be additionally protected by a RCCB

(Residual Current Circuit Breaker).

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 2

Illustration

Features

⁄Filler cap

¤On/off switch

‹Tool storage cart

›Wheel

ﬁTube park (see page 9)

ﬂCarrying handle

‡Hose

·Hose handle

‚Trigger lock button

„Power light

‰Steam ready light

ÂSteam trigger

⁄

‹

ﬁ

ﬂ

‡

‚

‰

„

Accessories you should have

ÊExtension tubes

ÁFloor nozzle

ËWindow squeegee attachment

ÈUpholstery nozzle

ÍJet nozzle

ÎAngled nozzle

ÏSmall & large brush

(plastic brush)

ÌSmall & large brush

(brass brush)

ÓCotton towel

›

Ô Measuring jug

Elbow attachment (shown

attached to floor nozzle)

ÒCloth cap for upholstery

nozzle

ÚFunnel

ÛJet nozzle adaptor

ÙSteam adjust knob

ıHose inlet

Most accessories are in the

storage cart beneath the

main body.



70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 3

Accessory assembly

ÈË

Please refer to the assembly

sequence to assemble your steam

cleaner.

Fitting the hose

1Pull the flap down at the front of the

cleaner, line up the locating keyway on

the plug with the socket and push the

hose connector firmly and fully into the

cleaner socket.

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 4

Operation

Please remember that the steam cleaner

operates by emitting steam at an increased

temperature of 130˚C. Never use it on

objects or surfaces which cannot resist this

temperature, delicate materials, dralon,

plastic, natural fur etc. Where any doubt

exists check carefully on a part of the

material where minor marks will not matter.

WARNING: Always switch off,

unplug and release all steam using the

steam trigger before opening and

removing the filler cap.

Storage cart removal

The cleaner may be used with or without

the storage cart.

1Press the button at the rear of the

cleaner and lift to remove the boiler from

the cart.

Filling the boiler

Ensure steamer is unplugged from the

socket before filling or re-filling.

1Unscrew the filler cap ⁄by

pressing down and turning anti-

clockwise.

2Fill the boiler with a maximum of 1.0

litres of water by using the jug

provided and funnel. Warm water

may be used which will reduce heat

up time. Do not use any detergent.

3Refit the filler cap and fully tighten

by pressing down and turning

clockwise.

WARNING: The filler cap must never

be opened during use.

WARNING: The use of any other

fluids can be dangerous and can lead

to damage of the heating element.

IMPORTANT: The water tank should be

emptied after use. Allow to cool before

emptying. Leave the water tank to dry out

before replacing the cap.

Re-filling the boiler

WARNING: Always switch off,

unplug and release all steam using the

steam trigger before opening and

removing the filler cap.

1Before opening the filler cap to refill the

tank, release the steam pressure by

pressing the steam trigger Âon the

handle. Press until all the steam has

been expelled from the tank, leave the

cleaner to cool down for a few minutes.

2Follow ‘filling boiler instructions’ to refill.

WARNING: Use warm water to

reduce the risk of spitting.

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 5

On/off switch

1When the water tank has been filled,

'see filling the boiler,' insert the plug into

the power socket.

2Switch the cleaner on by pressing the

on/off switch to 'on'. The power indicator

light (red) and the steam ready light

(orange) will illuminate.

Steam ready display

1The steam ready light (orange) will

illuminate when switched on. It will take

approximately 7 minutes to reach

temperature.

2When the correct temperature has been

reached the steam ready light (orange)

will go out. The steam cleaner is now

ready to use.

Note: The steam ready light will go on

and off during use. This is to keep the

steam at the correct temperature.

WARNING: To avoid injury, the

cleaner should be switched off during

breaks or pauses of work. For extra

safety apply the trigger safety lock.

If you leave the working area,

please switch the cleaner off and

unplug.

Steam adjust

The knob at the front of the cleaner

controls the steam output. Turn the knob

fully anti-clockwise for the maximum

amount of steam. Turn the knob clockwise

for decreasing amounts of steam.

Steam Trigger

WARNING: At the start water may

be ejected. Aim the steam safely. Start

by releasing the steam into a bucket

or sink.

The cleaner is now ready for use when

the orange steam ready light goes out.

1Ensure the safety lock is off. Push the

lock from the left side to lock the trigger

and push from the right to release the

lock.

2When you press the steam trigger, steam

will be emitted from the nozzle. Direct

the steam handle at a cloth first until the

steam is emitted evenly.

3Keep the steam trigger pressed and

direct the steam at the surface to be

cleaned, removing the dirt by moving the

steam jet backwards and forwards over

the area.

4To stop the steam jet, release the steam

trigger.

WARNING: Do not hold the steam

jet concentrated in one place for too

long.

•To control the steam temperature and

the cleaning power move the handle

closer to or further away from the

surface to be cleaned.

Lock

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 6

Attaching tubes &

handle

WARNING: Unplug the unit and

allow to cool before fitting or changing

attachments as they become hot

during use.

Attach the desired accessory to the

hose handle ·, extension tubes can be

attached to the handle for extra reach.

1Push the extension tubes Êonto the

connection nozzle as far as it will go until

you hear a click.

Some tasks may be easier with only

one, tube fitted or non at all.

2To connect the desired accessory

directly to the steam handle, slide the

handle into the accessory head or tube

until it locks in place.

Floor nozzle

The floor nozzle is used for the cleaning

of large, washable walls and floor areas.

The floor nozzle can be used with or

without the cloth cover.

•Sensitive surfaces, wood, linoleum etc.

should be used with the cloth.

1Fit the elbow attachment to the floor

nozzle Áand twist 1/2a turn.

2Fit the floor nozzle to the extension tube

or handle.

3To fit the cloth Óto the floor nozzle pull

the cloth under the clips on both sides.

Extra cloths can be ordered by using our

helpline. Alternatively any strong,

uncoloured cotton cloths may be used.

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 7

•The cleaning power of the cloth can be

optimised by turning and changing the

cleaning cloth regularly.

•To clean very dirty areas, move the

cleaning nozzle over the surface more

slowly in order to increase the cleaning

action of the steam.

WARNING: The cleaner is not

suitable for cleaning unsealed wooden

floors, laminates, soft plastics or

wooden furniture. If in doubt check

with the flooring manufacturer.

Accessory adaptor

1Push the jet nozzle adaptor as far as it

will go onto the connection nozzle until

you hear it click into place.

2The jet nozzle adaptor can be removed

again by pressing the accessory

connection button to release it.

Jet nozzle

1Push the jet nozzle directly onto the jet

nozzle adaptor and turn in a clockwise

direction to lock into place.

2It can be used with various fittings,

angled nozzle small and large brush

attachments, depending on the task.

•The jet nozzle can be used with various

fittings for cleaning inaccessible areas

such as corners, joints, blinds, radiators

and toilets as well as various surfaces

such as stainless steel, windows,

mirrors, enamelled surfaces and also for

stain removal.

Brush attachment

1Choose the desired brush attachment for

the task.

2Fit the brush attachment onto the jet

nozzle by pushing on.

3Pull to remove.

IMPORTANT: Do not use the brass brush

on grouting or delicate surfaces. Always

test a hidden area before using steam on

any surface.

Upholstery attachment

1Fit the rectangular upholstery steam

nozzle to the jet nozzle adaptor by

pushing on and turning clockwise to

lock.

2This nozzle can be used with or without

the cotton cover.

3Turn anti-clockwise and pull to remove.

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 8

•This nozzle is ideal for cleaning

cushions, carpets and car seats.

IMPORTANT: Always test on a hidden

area before you start. Steam cleaning may

not be suitable for certain fabrics such as

dralon due to the high temperature of the

steam.

Window attachment

1Locate the window squeegee onto the

two tabs at the bottom of the upholstery

nozzle. Then push the top of the

squeegee until the clip goes over the top

of the upholstery nozzle.

•This attachment is ideal for cleaning

windows, mirrors, ceramic tiles and other

non porous smooth surfaces.

•Apply the steam evenly to the glass

surface from a distance of 10-15 cm.

Then switch the steam off and wipe the

moisture off the glass from top to bottom

using the rubber squeegee. Wipe the

rubber squeegee and the lower edge of

the window. Dry after every strip.

WARNING: Glass surfaces can be

shattered by the sudden application of

excessive heat. Warm glass surfaces

first from a distance of 20-25 cm.

Continue at a distance of 10-15 cm.

Tube park

•During use the tubes and nozzle can be

stored in the park position for short

breaks whilst cleaning. (Only with the

cart fitted).

Tool storage

•The accessories for your steam cleaner

can be neatly stored in the cart beneath

the main body of the cleaner. Press the

button at the rear of the cleaner and lift

the main body off to access the tools.

•When returning steam cleaner to the cart

put hose inlet end ıin first then with a

firm downward motion push till the

button at the back of cart goes in then

out, a click will be heard.

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 9

After use

1Switch the cleaner off and unplug from

the socket. Wait until the cleaner has

cooled down completely.

2Release any steam pressure by pressing

the steam trigger on the handle

3Apply the steam safety lock.

4Remove the filler cap.

5Empty the water tank. Allow the inside of

the water tank to dry out before

replacing filler cap.

Rinse water tank

To clean the water tank fill it with clean

water and shake vigorously. This will release

any limescale deposits that have collected

on the bottom of the tank. Pour the water

out by holding upside down.

Descaling

In order to prolong the life of your

cleaner you should descale the steam tank

at least every 6 months.

1Switch the cleaner off, unplug and allow

to cool.

2Empty any water out of the tank.

3Mix the descaler in the measuring jug

using warm water. We recommend using

50gm of citric acid crystals per 1 litre of

water. Citric acid crystals are available

from most pharmacies.

4Pour 1 litre of the descaler solution into

the tank.

5Fit the cap and tighten fully.

6Using the handle, move the steam

cleaner about to swill the solution around

the tank.

7Leave for 30 minutes.

8Empty the solution carefully.

9Rinse the tank with clean warm water,

then empty.

10Wipe the outside of the cleaner with a

damp cloth to remove all traces of

descaler solution.

WARNING: Do not switch on the

heater with the descaling solution

inside.

70535 Rev 1 steam cleaner 7/3/05 10:11 AM Page 10

Indice

Altri manuali Morphy Richards Pulitore a vapore

Morphy Richards

Morphy Richards 70460 GRIMEBUSTER INSTANT STEAM CLEANER Manuale utente

Morphy Richards

Morphy Richards IB70505 Manuale utente

Morphy Richards

Morphy Richards IB70452 Manuale utente

Morphy Richards

Morphy Richards IBGRIMEBSTR Manuale utente

Morphy Richards

Morphy Richards 70455 Manuale utente

Morphy Richards

Morphy Richards Upright and Handheld Steam Cleaner Manuale utente

Morphy Richards

Morphy Richards 720512 Manuale utente

Morphy Richards

Morphy Richards Supersteam Manuale utente

Morphy Richards

Morphy Richards Multi Floors Manuale utente

Morphy Richards

Morphy Richards VC720024M Manuale utente

Morphy Richards

Morphy Richards VC720507MUK Manuale utente

Morphy Richards

Morphy Richards ESSENTIALS PRECISE STEAM CLEANER - REV 1 Manuale utente

Morphy Richards

Morphy Richards Essentials Compact Steam Cleaner Manuale utente

Morphy Richards

Morphy Richards VC720025MUK Manuale utente

Morphy Richards

Morphy Richards Garment Steam Brush Manuale utente

Morphy Richards

Morphy Richards Luna VC720506MUK Manuale utente

Morphy Richards

Morphy Richards IB70450-1 Manuale utente

Morphy Richards

Morphy Richards Power SteamPro Pulsonic VC720504MUK Manuale utente

Morphy Richards

Morphy Richards IB70540 Manuale utente

Morphy Richards

Morphy Richards 70495 Manuale utente

Morphy Richards

Morphy Richards power steamPro clean+steem Manuale utente

Morphy Richards

Morphy Richards IB70445 Manuale utente

Morphy Richards

Morphy Richards VC720520MUK Manuale utente

Morphy Richards

Morphy Richards 47507 Manuale utente

Manuali Pulitore a vapore popolari di altre marche

Oreck

Oreck STEAM-IT STEAM100LRH Manuale utente

Beautural

Beautural YPZ-146 Manuale utente

MPM

MPM MZP-02 Manuale utente

Electrolux

Electrolux Refine 500 Manuale utente

Kärcher

Kärcher SC 3 Premium Manuale utente

Shark

Shark PRO Steam & Spray Istruzioni operative e di manutenzione

Jula

Jula 802-337 Manuale utente

Haan

Haan Floor Sanitizer MS-30 Manuale utente

Black & Decker

Black & Decker HSM13E1 Manuale utente

HOFFEN

HOFFEN GS-1231 Manuale utente

POLTI

POLTI VAPORETTO SYSTEME PRO Manuale utente

eta

eta AQUASIM PRO Manuale utente

Maxwell

Maxwell MW-3715 G Manuale utente

VAPamore

VAPamore Primo MR-100 Manuale

Bestron

Bestron AZQ016 Manuale utente

Nilfisk-ALTO

Nilfisk-ALTO Steamtec 312 Manuale utente

Tempo di saldi

Tempo di saldi SPINSCRUBBER Manuale utente

DOMENA

DOMENA HYGIAFLOR Manuale utente