morse 4560M-P Manuale utente
Copyright 2021 - Morse Mfg. Co., Inc. Form PL4560M-P (0616-____) (Updated 17 Mar, 2021) 1
INSTALLATION INSTRUCTIONS
for MORCINCHTM Drum Holder
Position Rim Clamp Assembly (item 1) on drum holder bracket1.
with holes aligned.
Bolt in place using 2 bolts (item 5) and 2 nuts (item 4).2.
ITEM QTY PART # DESCRIPTION
2 1 3616-P HANDWHEEL ASM, 4”, 3540-P 185R
3 1 3510-P THREADED BARREL, RIM CLAMP
4 2 1169-P NUT, 3/8-16 REV HEX LOCK
5 2 82-P HHCS, 3/8-16 X 2-1/4 GR2
6 1 1315-P HHCS, 3/8-16 X 2-3/4 GR2
INSTALLATION INSTRUCTIONS
for Drum Holder with Socket Tube
Slide Rim Clamp Assembly (item 1) down through socket1.
tube, and line up top holes in Rim Clamp Assembly with top
holes of socket tube.
Use bolt (item 6) and nut (item 4) to bolt in place through the2.
top holes of the socket tube and the Rim Clamp Assembly.
The Specialist In Drum Handling Equipment
Kit # 4560M-P
Kit, Rim Clamp Assembly, Spark Resistant
CONTENTS
Page
Parts List and Diagram. . . . . . . . . . . . . . . . . . . 1
Installation Instructions. . . . . . . . . . . . . . . . . . . . 1
Operating Instructions. . . . . . . . . . . . . . . . . . . . 2
Operator’s Manual
for Morse Rim Clamp Assembly Kit
with Spark Resistant Parts
Kit # 4560M-P
Serial number 0616 to ____ (MMYY)
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
The Specialist In Drum Handling Equipment
Operator’s Manual for Morse Rim Clamp Assembly Kit with Spark Resistant Parts
Part # 4560M-P
Serial Number 0616 to ____ (MMYY)
morsedrum.com
Copyright 2021 - Morse Mfg. Co., Inc. Form PL4560M-P (0616-____) (Updated 17 Mar, 2021) 2
Kit # 4560M-P
Kit, Rim Clamp Assembly, Spark Resistant
OPERATING INSTRUCTIONS
TO SECURE DRUM:
Turn hand wheel (item 2) counter clockwise to open top jaw.1.
Position drum holder assembly with bottom jaw of rim clamp2.
directly under top rim of drum.
Turn hand wheel clockwise until top jaw is pressing tightly3.
against top of drum (see Figure 1).
Secure drum with chain and ratchet mechanism. Drum is4.
now ready to be lifted and tilted.
TO RELEASE DRUM:
Lower drum to oor in an upright position.1.
Release chain from ratchet mechanism by applying2.
pressure to ratchet handle in a clockwise direction with one
hand and opening pawl to free ratchet with other hand.
Remove chain link from ratchet.
Open rim clamp by turning hand wheel counter clockwise.3. Figure 1
Plastic drum being lifted with
Rim Clamp Assembly Kit
installed.
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to
the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Altri manuali morse Magazzinaggio
morse
morse 311 Series Manuale utente
morse
morse 400A-96SS Manuale utente
morse
morse 0409 Manuale utente
morse
morse 400A-60-125 Manuale utente
morse
morse 80i Manuale utente
morse
morse Omni-Lift Karrier Manuale utente
morse
morse 0409 Manuale utente
morse
morse 400AM-72-124 Manuale utente
morse
morse 82A-124 Manuale utente
morse
morse 287-2H Manuale utente
morse
morse 1110 Manuale utente
morse
morse 400A-96SS-124 Manuale utente
morse
morse 520M Manuale utente
morse
morse 185R Manuale utente
morse
morse 82A-SS Manuale utente
morse
morse 82A-125 Manuale utente
morse
morse 400A-60-124 Manuale utente
morse
morse 0719 Manuale utente
morse
morse 400A-60-115 Manuale utente
morse
morse 400AM-96-124 Manuale utente
