Morso P30 Manuale utente

www.morsoe.com

Morsø P30/31

Instructions for installation and use

Sprog Sprog

CONTENTS

1.0 Installation of your morsø stove .. .. .. .. .. .. .. .. .. .. .. .. .. .. 5

2.0 Stoking technique/ Use of your stove......................13

3.0 Regular maintenance of the stove .. .. .. .. .. .. .. .. .. .. .. .. .27

4.0 Technical data ..............................................38

MORSØ JERNSTØBERI A/S . DK-7900 NYKØBING MORS

E-Mail: [email protected] · Website: www.morsoe.com

Instructions for installation and use

Morsø P30/31

EN 14 785

Sprog Sprog

Page no.

1.0 Installation of your morsø pellet stove 5

1.1 Before installation 5

1.2 Location, assembly and installation 5

1.3 Stove location/ Offsets 6

1.4 The chimney 7

1.5 Chimney sweep 7

1.6 Example of chimney installations 7

2.0 Stoking technique/ Use of your stove 13

2.1 General 13

2.2 Construction of the pellet stove 13

2.3 Timber (white) pellets 14

2.4 Safety equipment 14

2.5 Operating display and Operating keys 16

2.6 Operation and programming your pellet stove 16

2.7 Functions and operation of your stove 22

3.0 Regular maintenance of the stove 27

3.1 Cleaning 27

3.2 Description of alarms 29

3.3 Information and problems 30

3.4 Guarantee conditions 31

3.5 Liability 32

3.6 Spare parts 33

3.7 Electrical diagram 33

4.0 Technical data 34

Congratulations on the purchase af your new Morsø pellet stove!

Morsø, the largest supplier of the Danish market, has produced

wood-burning stoves of the highest quality since 1853. If you just

follow these instructions, we are sure that you will enjoy and

make good use of your new stove for many years.

Test certiﬁcates - must accompany the stove

The Danish Wood Burning Stove Act came into force on 1 January 2008. In connection with the

introduction of the Danish Wood Burning Stove Act there is a requirement for pelleted fuel bur-

ners to be accompanied by a test certiﬁcate issued by an accredited testing institution that has

carried out environmental tests on the stove.

The test certiﬁcate is enclosed with the stove and must be retained by the owner and ac-

company the stove for its lifetime.

The instalation of your Morsø Pellet stove must be approved by a suitable qualiﬁed ﬁtter or lo-

cal building control.

Extra accessories

An extensive range of chimney, ﬂoor plates and accessories is available for your Morsø stove,

to ease the day-to-day operation and maintenance of your Morsø stove.

1.0 Installation of your morsø stove

Before installation

Please direct any queries to your Morsø dealer.

• Prepare the location where the pellet stove is to be installed in accordance with local, na-

tional and European legal requirements.

• Incorrect installation or poor maintenance (not in accordance with that described in this

guidance) can result in injury or damage to persons or objects. Morsø accepts no civil or

criminal liability in such an event.

• The chimney system must be connected before the electrical pellet stove is connected to

the power supply.

• The protection grille fitted inside the pellet hopper must never be removed.

• There must be sufficient ventilation in the room where the pellet stove is to be installed.

• The installation, electrical connection,functional check and maintenance must be carried

out by qualified and authorised persons.

Location, assembly and installation

The location of the pellet stove in a habitable room is critical for heating the room uniformly.

Before deciding where to fit the pellet stove, you should take account of the following:

• Combustion air may not be supplied from a garage or room without ventilation or extrac-

tion, but must be drawn from an open space or from outside.

• Installation of a pellet stove in a bedroom, bathroom or wet room, or in which another

heater without a separate air supply (fireplace, wood-burning stove, etc.) is already instal-

led, is prohibited.

• Installation of a stove surroundings with an explosive atmosphere is prohibited.

• It is beneficial to install the pellet stove in a central location within the room to ensure

maximum circulation of heat.

• The power supply must be provided with an earth connection (if the cable supplied is not

long enough to reach the socket, an extension cable laid on the floor must used).

• The pellet stove must be placed where there Is sufficient air supply for pellet combustion

(approx. 50m3/h of air must be available) in accordance with the installation requirements

and the current provisions of the country concerned.

• The volume of the room may not be below 30 m3.

IMPORTANT!

THE PELLET STOVE MUST BE INSTALLED AND ASSEMBLED BY QUALIFIED PER-

SONS

Sprog Sprog

The room must be:

• prepared so that conditions are appropriate for operation of the pellet stove

• provided with an appropriate flue gas chimney system

• provided with a 230V 50Hz (EN 73-23) power supply

• Provided with permanent ventilation complying with national building regulation for solid

fuel appliances (or a direct air supply from outside to the pellet stove not less than 80 mm

diameter.

• provided with a CE compliant earth connection.

The pellet stove must be connected to a SINGLE exhaust duct (chimney) or a vertical internal or

external duct in accordance with current provisions.

Combustion of timber (white) pellets causes smoke, which can deposit soot if it comes in contact

with walls.

Fitting a grille to the end of the chimney that may lead to poor operation of the stove is strictly

prohibited.

Approved flues and joints with appropriate silicone seals must always be used to ensure the

tightness of the flue.

No more than 3 no. 90° bends may be used to connect the chimney, and they may not be used

more than 2-3 m horizontally.

Stove location/ Clearance

Clearances only apply when the stove is to be placed near ﬂammable materials. Your new st-

ove may be located as stated on the approval sign on the rear of the stove if the walls made of

ﬂammable material.

Distance to furniture

The clearance to ﬂammable material in front of the stove is 700 mm. With regard to positioning

furniture, the clearance to ﬂammable material must be complied with, but you should consider

whether furniture and other items would be dried out so near the stove.

A pellet stove becomes hot when lit. You should therefore take the necessary care, especially

with regard to children coming into contact with the stove.

On the ﬂoor

If the stove is ﬁtted on a combustible ﬂoor, the national and local provisions must be complied

with regard to the size of incombustible hearth required to cover the ﬂoor below the stove. You

should naturally ensure that the sheet can support the weight of the stove and possibly the

steel chimney. (The hearth temperature beneath the P30 and P31 pellet stove does not excede

100°)

The chimney

A modern efﬁcient stove imposes greater requirements on your chimney. Therefore, you

should let the chimney sweep assess the chimney.

The chimney opening must comply with national and local provisions.

Too large a chimney opening leads to too much energy being used to heat the chimney to ob-

tain an acceptable draught. A brick chimney with a large opening must have an insulated lining

of the right diameter. This results in increased draught and better fuel economy.

There are no particular requirements for chimney height, but it must be high enough to obtain

a good draught and avoid smoke nuisance. As a general rule, a satisfactory draught is achieved

if the chimney is 4 metres above the stove and no less than 80 cm above the ridge. If the chim-

ney is on the side of the building, the top of the chimney should never be lower than the ridge

or the highest point on the roof. Morsø recommends a minimum draught in the chimney of 10

pa.

Chimney sweep

As mentioned, it may be wise to consult the local chimney sweep before installing the stove.

In any case, the chimney sweep must be informed when the pellet stove is ﬁtted. If the chim-

ney has not been used for some time, it should be checked for cracks, birds’ nests etc. before

being used again.

Min. clearance to ﬂammable material:

Installation Stove type Distance

Distance B Distance C Distance in front

of stove

Normal

right-angled

Morsø P30/31

uninsulated ﬂues

200 mm. 200 mm. - 700 mm

Corner

installation

Morsø P30/31

uninsulated ﬂues

- - 200 mm.

With regard to heat circulation, cleaning and possible internal cleaning of the stove, the re-

commended distance to walls is 10-15cm.

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:20

Afstand til brændbart

Morsø P30

RSV

24.10.12

30.6

ERROR!:materiale

Date of print: 24-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-06 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg.:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Sprog Sprog

In this case, the chimney must be insulated, as the whole of the chimney is outside the house. A

T-piece with built-in inspection cover must be ﬁtted at the base of the chimney.

Examples of chimney installations:

Chimney installation, Example 1

Cowl

T-piece for condensate

Installing a 90° bend is

not recommended, as

over a short time ash will

hinder smoke ﬂow and

thus create problems for

the draught to the stove.

Chimney installation, Example 2

This type of installation requires an insulated chimney on the external part of the chimney. In-

ternally, both insulated and uninsulated chimneys can be used. Note, however, the spacing to

combustible material. If an insulated chimney is used, it and therefore the stove can be placed

closer to a ﬂammable wall.

A T-piece with built-in inspection cover must be ﬁtted at the base of the chimney.

Cowl

Insulated chimney

T-piece for condensate

Installing a 90° bend is

not recommended, as

over a short time ash will

hinder smoke ﬂow and

thus create problems for

the draught to the stove.

A-A

(1 : 10)

B-B

(1 : 10)

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Montering til skorsten

Morsø P30

RSV

29.10.12

31.0

ERROR!:materiale

Date of print: 30-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-08 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

A-A

(1 : 10)

B-B

(1 : 10)

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Montering til skorsten

Morsø P30

RSV

29.10.12

31.0

ERROR!:materiale

Date of print: 30-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-08 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Sprog Sprog

Installing a 90° bend is

not recommended, as

over a short time ash will

hinder smoke ﬂow and

thus create problems for

the draught to the stove.

Cowl

Non-insulated pipes

Insulated chimney

T-piece for condensate

Chimney installation, Example 3

With this type of installation, there is no need for an insulated chimney inside the house. An

insulated pipe is required for the external section. A T-piece with built-in inspection cover must

be ﬁtted at the base of the chimney inside the building.

H > 4 mt

H > 1,5 mt

Maks. 2-3 m

3-5% slope

insulated chimney

T-piece for condensate

Installing a 90° bend is

not recommended, as

over a short time ash will

hinder smoke ﬂow and

thus create problems for

the draught to the stove.

Chimney installation, Example 4

With this type of installation, there is no need for an insulated chimney inside the house. An

insulated pipe is required for the external section. A T-piece with built-in inspection cover must

be ﬁtted at the base of the chimney inside the house, with another T-piece outside to allow this

stretch to be inspected. Installing a 90° bend as the ﬁrst piece is not recommended, as over a

short time ash will hinder smoke ﬂow and thus create problems for the draught to the stove.

A-A

(1 : 10)

B-B

(1 : 10)

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Montering til skorsten

Morsø P30

RSV

29.10.12

31.0

ERROR!:materiale

Date of print: 30-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-08 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

A-A

(1 : 10)

B-B

(1 : 10)

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Montering til skorsten

Morsø P30

RSV

29.10.12

31.0

ERROR!:materiale

Date of print: 30-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-08 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Sprog Sprog

A-A

(1 : 10)

B-B

(1 : 10)

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Montering til skorsten

Morsø P30

RSV

29.10.12

31.0

ERROR!:materiale

Date of print: 30-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-08 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

This type of installation does not need an insulated chimney, as part of the ﬂue is ﬁtted internally

in the house, and the other part is inside an existing chimney. Remember to only use approved

duct tubes.

A T-piece with built-in inspection cover must be ﬁtted at the base of the chimney. Installing a 90°

bend as the ﬁrst piece is not recommended, as over a short time ash will hinder smoke ﬂow and

thus create problems for the draught to the stove. Note here the use of 2 no. 45° bends to ensure

that ash drops into the T-piece with an inspection cover.

Chimney installation, Example 5

Support plate

Cowl

Installing a 90° bend is

not recommended, as

over a short time ash will

hinder smoke ﬂow and

thus create problems for

the draught to the stove.

T-piece for condensate

45° bend

2.0 Stoking technique/ Use of your stove

2.2 Construction of the pellet stove.

The drawing above shows the internal parts of a pellet stove. After ﬁlling the hopper (7), timber

pellets are transferred by the auger (1) to the burn pot (3). Ignition is initiated by the ignition

tube (2), which heats the air.

2.1 General

The pellet stove must be installed in a dry environment. As it is controlled by an electronic prin-

ted circuit board, combustion is completely automatic and controlled.

The printed circuit board regulates the lighting phases, 5 power steps, extinguishing and thus

guarantee safe function.

The majority of the ash created during combustion of the pellets drops into the ash drawer via

the burn pot used for combustion.

In any event, check the burn pot daily, as not all pellets are of a high standard and can therefore

leave remnants that can be difﬁcult to remove.

The glass is provided with a special self-cleaner. A slight greyish patina is, however, unavoidably

formed on the glass after some hours’ operation.

1. Pellet auger

2. Ignition tube

3. Burn pot

4. Exhaust ﬂue

5. Heat-resisting steel heat exchanger

6. Pellet hopper

7. Smoke deﬂector

8. Flue gas outlet

A-A

(1 : 10)

B-B

(1 : 10)

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Montering til skorsten

Morsø P30

RSV

29.10.12

31.0

ERROR!:materiale

Date of print: 30-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-08 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

A-A

(1 : 10)

B-B

(1 : 10)

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Montering til skorsten

Morsø P30

RSV

29.10.12

31.0

ERROR!:materiale

Date of print: 30-10-2012

U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm

P30-08 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

8 4

Sprog Sprog

2.3 White pellets

Timber (white) pellets are made of sawdust and woodchips. The material may not contain sub-

stances such as glue, varnish or synthetic substances. The timber is subjected to high pres-

sure during fabrication and extruded through a holed die. The high pressure heats the sawdust

and activates the timber’s natural binders. The pellets thus retain their shape without added

binders. The caloriﬁc value of the pellets varies with the type of timber and can exceed that of

natural timber by one and a half to two times. The cylindrical timber pellets have a diameter of

6 mm and a variable length between 10 and 30 mm.

The density of the pellets is approx. 650 kg/m3

Due to their low moisture content (8-10 %), they have a high energy content.

Timber pellets must in all cases be transported and stored dry. On contact with moisture, they

swell and become unusable.

The most important European quality certiﬁcations for timber (white) pellets are DIN 51 735

and Ö-norm M7135. They guarantee that the following is complied with:

Length 10 mm.

Diameter 6 mm.

Speciﬁc gravity 650 kg/m3

Caloriﬁc value 4.9 Kwh/kg

Residual moisture content 6-10%

Ash content below 1.5 %

2.4 Safety equipment

The pellet stove is provided with the most modern safety systems, such that in the event of a fault

in one of individual parts or in the flue, the stove or habitable room cannot come to harm. In all

cases, the pellet feed will immediately stop if a problem arises and extinguishing is activated.

The associated alarm will be shown on the display. Further details are given in the chapter about

alarms.

Open never the lid when the pellet stove Is operating. FIRE HAZARD!!!

The pellet stove may not be used with the lid open or with damaged glass. FIRE HAZARD!!! When

the pellet stove is working, the surfaces, glass, handle and pipes become very hot. Therefore,

you should only touch these parts when lit using appropriate protective wear.

Do not light the pellet stove without first having completed the daily inspection, as described in

chapter on MAINTENANCE these instructions.

Never dry clothing on the stove. Any clothes horses and the like be kept at an appropriate di-

stance. FIRE HAZARD!!!

Comply carefully with the maintenance program.

Do not switch off not the pellet stove by cutting off the power supply. Always use P3.

Do not clean the stove before it and the ash have entirely cooled down.

The pellet stove must only be supplied with quality pellets with a diameter of 6 mm, as speci-

ﬁed in the respective chapter.

The pellet stove will not function with ordinary timber.

The pellet stove must not be used as an incinerator.

Sprog Sprog

2.5 Operating display and operating keys

10:35

20°C P-1

Drift

Clock

Timer

Room temperature

Power step

Operating key 1-2: Raise and lower heating power (e.g. step1 -step2-step5-step1-...)

Operating key 3: On and off

Operating key 4: Temperature lowering

Operating key 5: Temperature increase

Operating key 6: Multi-function key

Operating key 7: Multi-function key

2.6 Operation and programming your pellet stove

The pellet stove is provided with different functions which are accessible in the individual pro-

gramming menus. Some of these are available to the user, others are protected by a password

and only available to technical services staff. The menus are as follows:

• Menu 01 SET CLOCK

• Menu 02 SET TIME

• Menu 03 SELECT LANGUAGE

• Menu 04 SEE SETTINGS

• Menu 05 STOVE STATUS

• Menu 06 OPERATING HOURS

• Menu 07 BANK DATA (password protected)

• Menu 08 RESET TIMER (password protected)

• Menu 09 ADJUST PROGRAMME (password protected)

• Menu 10 SELECT FORMULA (password protected)

Menu 01 SET CLOCK Setting clock

To set the clock, you must do the following:

1. Hold down key 4 for 3 seconds. MENU 01: SET CLOCK appears. Conﬁrm with key 6.

2. The display shows ﬁgures 1-7 and the day of the week or if the timer is deselected OFF

deselected day. Set the current day with keys 4 or 5 or select OFF Deselected day if the

timer is to be inactive, and conﬁrm with key 6.

3. The display shows HOURS CLOCK and the current time: set the hour using keys 4 or 5

and conﬁrm with key 6

4. The display shows MINUTES CLOCK and the current time: set the minutes using keys 4 or

5 and conﬁrm with key 6

5. Press key 3 to return to the main menu

Menu 02 SET TIME Setting timer

The timer can be used to schedule the pellet stove on and off for each day of the week with

up to four independent timings (PROGRAMME 1, PROGRAMME 2, PROGRAMME 3 and PRO-

GRAMME 4)

Example with 2 independent timings:

To access this menu, use the following procedure:

1. Keep key 4 pressed down for 3 seconds. The text MENU 01: SET CLOCK is

shown.

2. Press key 4 once: The display shows Menu 02 SET TIME

3. Press key 6 to allow access: The display shows the desired screen image. The

lines shown on the display each correspond to a programme.

Description of programme lines:

Description Adjustable values

START PROG-1 From OFF to 23:50 in 10 minute steps

STOP PROG-1 From OFF to 23:50 in 10 minute steps

DAY PROG-1 Between On/Off for days 1 to 7 (Monday to Sunday)

POWER PROG-1 From 1 to 5

TEMP ROOM PROG-2 From 7° to MAn (MAn means that the sensors is put out of action)

START PROG-2 From OFF to 23:50 in 10 minute steps

STOP PROG-2 From OFF to 23:50 in 10 minute steps

DAY PROG-2 Between On/Off for days 1 to 7 (Monday to Sunday)

POWER PROG-2 From 1 to 5

TEMP ROOM PROG-2 From 7° to MAn (MAn means that the sensors is put out of acti-

on)

START PROG This parameter shows the time of ignition

STOP PROG This parameter shows the time of extinguishing (must be no less than 60 mi

nutes from start).

DAY PROG This parameter is used to set the days on which the selected programme is

active. To set this parameter the following procedure must be followed: Use

key 5 to set the required day (days are 1, 2, etc.) and use key 4 to select the

value ON OFF: If OFF is selected, the programming selected will not be acti

vated on the day previously selected. If ON is selected, the programming will

be activated on the day selected.

POWER PROG This parameter sets the power step at which the stove will start.

SET TEMP PROG This parameter indicates the required room temperature.

10:35

START

PROG - 1

If this black line the display below the clock symbol is not

on, the timer not is active.

Sprog Sprog

Example of programmed operation with 2 independent timings:

Suppose that we want to turn on the stove at 06:00 and turn it off at 08:30 (PROGRAMME 1) and

the required room temperature is 21°C with a desired power step of 4.

After accessing MENU 02 as in MENU 02 SET TIME, this screen image appears:

Press key 7 in the event of an error to go back one programme line.

Now we must decide on which days the programme just set is to be active.

Suppose that PROGRAMME 1 is to be active on Mondays and Wednesdays but inactive all other

days. The following programming steps are required:

08:30

STOP

PROG - 1

Set the desired the stop time for PROGRAMME 1 using

keys 4 or 5. Press key 6 to conﬁrm and continue to the

next programme line.

ON 1

Monday

PROG - 1

Use key 5 to set the day on which PROGRAMME 1 is to

be active (in this case Monday). Now use key 4 to set the

value ON/OFF, which determines activation or deactiva-

tion of PROGRAMME 1 (in this case ON, i.e. programming

on). In summary, the pellet stove is turned on Monday at

06.00 and turned off at 08.30.

OFF 2

Tuesday

PROG - 1

On Tuesday, the pellet stove is not turned on

ON 3

Wednesday

PROG - 1

On Wednesday, the pellet stove is to be turned on at

06.00 and turned off at 08.30.

OFF 4

Thursday

PROG - 1

On Thursday, the pellet stove is not turned on

OFF 5

Friday

PROG - 1

On Friday, the pellet stove is not turned on

OFF 6

Saturday

PROG - 1

On Saturday, the pellet stove is not turned on

OFF 7

Sunday

PROG - 1

On Sunday, the pellet stove is not turned on

P - 4

POWER

PROG - 1

Set the desired power step for PROGRAMME 1 with the

aid of keys 4 or 5, in this case step 4. Press key 6 to con-

ﬁrm and continue to the next programme line.

Conﬁrm with key 6 to go to the next programme line

Now we must select the power step for PROGRAMME 1.

23°C

SET TAMB

PROG - 1

Select the required temperature for PROGRAMME 1 with

keys 4 or 5 and conﬁrm with 6

Now the required room temperature must be selected, independent of the previously chosen

temperature under manual operation. As soon as this temperature is reached, the stove will go

to MODULE or ECO STOP if climate comfort is activated.

06:00

START

PROG - 1

Set the desired the start time for PROGRAMME 1 using

keys 4 or 5. Press key 6 to conﬁrm and continue to the

next programme line.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Morso Stufa a pellet

Morso

Morso 1630 Manuale utente

Manuali Stufa a pellet popolari di altre marche

SMG

SMG Comfort Bilt HP50GC Manuale utente

Quadra-Fire

Quadra-Fire MTVI-E2-MBK Manuale utente

Quadra-Fire

Quadra-Fire MTV-E2-CSB Manuale utente

Palazzetti

Palazzetti JP Series Guida all'installazione

Travis Industries

Travis Industries Avalon 900 PS Manuale utente

Flame

Flame FP-45 Manuale utente

Astra

Astra P-7 Manuale utente

Heatilator

Heatilator ECO-ADV-PS35 Manuale utente

Cadel

Cadel aquos 24 h2O Manuale utente

vicenza

vicenza V4.5 Manuale utente

MCZ

MCZ VIVO 90 COMFORT AIR 9 M1 Manuale tecnico

Quadra-Fire

Quadra-Fire 1000 Gold Manuale del proprietario

Ferroli

Ferroli GEMMA Manuale utente

pleasant hearth

pleasant hearth PH35PS Series Manuale utente

Breckwell

Breckwell Tradition P24FS Manuale utente

Quadra-Fire

Quadra-Fire CB1200M-MBK Manuale utente

England's Stove Works

England's Stove Works 25-EP Manuale utente

Avalon

Avalon Astoria Manuale utente