Morso 553 Manuale utente

morsø

PANTHER

GAS STOVE

MODEL No. 553

OWNER’S GUIDE

This appliance meets the requirements of the European Gas Directive

This guide is intended to help you care for your morsØgas stove.

It gives sufficient details to enable your gas stove to be operated and maintained

Please read carefully before using your gas stove and keep for future reference

Please keep your Owner Guide in a safe place together with the Installation Instructions

Manufactured by Morsø Jernstøberi A/S, Furvej 6, 7900 Nykøbing Mors, Denmark

Distributed by Wonderfire, Wood Lane, Erdington, Birmingham B24 9QP, England

600B477/01

As supplied, this appliance is for use with natural gas (G20)

When converted using conversion kit no. 555311 this appliance is for use with propane gas (G31)

This appliance is for use in the United Kingdom (GB) and the Republic of Ireland (IE) only.

Thank you for choosing morsø.

All morsø appliances are designed to meet the most stringent quality, performance and safety requirements to provide our customers with

many years’ trouble-free service.

Your owner guide aims to improve your understanding and appreciation of your gas fire by providing simple and informative instructions to

ensure that you benefit from the excellent performance and features it has to offer.

If you require further assistance or any advice about gas in general, our service department will be pleased to help.

In the United Kingdom please telephone 0345-626341.

In the Republic of Ireland please telephone 353 183 75114

CUSTOMER CARE

SAFETY

IF YOU SMELL GAS

DON’T SMOKE

EXTINGUISH ALL NAKED FLAMES

DON’T TURN ELECTRICAL SWITCHES ON OR OFF

TURN OFF THE GAS SUPPLY AT THE METER

OPEN DOORS AND WINDOWS TO GET RID OF THE GAS

IMMEDIATELY CALL THE GAS EMERGENCY SERVICE -SEE YOUR LOCAL TELEPHONE DIRECTORY

1. As with any gas appliance, this fire must be

installed by a competent person. In the United

Kingdom, installation must be in accordance with

the latest edition of the Gas Safety (installation &

use) Regulations.

In the Republic of Ireland, installation must be in

accordance with all national and local regulations

in force.

2. If the fire is intended to be installed to a chimney

which was previously used for solid fuel, please

note that the chimney must be swept prior to

installation.

3. On no account must the fire stand on carpets or

other combustible materials. The fire must stand

on a non-combustible hearth surface. The hearth

material must be at least 600mm wide x 500mm

deep x 12mm thick.

4. Clearances to combustible and non-combustible

surfaces must be at least those shown in figure 1.

Please bear this in mind if altering the room.

5. Never put any paper or other material on the fire.

Never add any extra coals above the number stated

in these instructions. This could cause a safety

hazard.

6. The cast iron top, front, rear and sides of this stove

are considered to be working surfaces and so will

become very hot when in use. Always take care

when using this appliance. A suitable guard which

complies with BS 6539 or 6778 should be used for

the protection of young children, the elderly and

the infirm. Such a guard is also recommended for

the protection of pet animals.

7. Always switch the stove off and allow to cool before

handling. Note that this appliance retains heat for

some time after it has been switched off.

8. Never place clothing, towels or any other fabrics on

or over the fire.

9. This appliance is fitted with a device which will

automatically shut off the supply of gas to the fire

if, for any reason, the flames go out. If this device

does operate or if the fire is turned off accidentally

or intentionally, always wait three minutes before

attempting to relight.

10. This stove must never be used with the windows

open or with either glass panel damaged or

removed. The windows should always be secured

with the locking screw (See “Cleaning your stove”).

If either window is damaged or will not close

securely the fire must be turned off and not used

until the window is changed or corrected by a

competent service engineer.

11. If the house is left unoccupied for a long period we

recommend that the stove is turned fully off.

Please note

When operating your fire for the first time, some vapours may

be given off which may cause a slight odour and could possibly

set off any smoke alarms in the immediate vicinity. These

vapours are quite normal with new appliances. They are totally

harmless and will disappear after a few hours use.

This fire is supplied with ceramic “coals” to simulate a real coal

fire. After some use, the firebox walls and coals may change

colour. This is quite normal.

Figure 1

OPERATING YOUR STOVE

The Flame Sensing & Flue Blockage Safety System.

For your safety, this appliance is fitted with a flue blockage safety device that will shut down the appliance in the event of abnormal flue

conditions. This device is NOT a substitute for an independently mounted Carbon Monoxide detector.

The device will also automatically shut off the gas supply to the fire if the pilot flame goes out for any reason. If the device starts to shut

off the gas frequently, get expert advice.

The system incorporates a probe that senses that the heat from the pilot flame is correct. If this probe is cool, the device will prevent any

gas flow unless the control knob is kept depressed at the PILOT/IGN position.

If, for any reason, the flames go out when the fire is hot or if the fire is turned off when

hot, always wait at least three minutes before attempting to relight.

Always make sure that the windows are securely closed before lighting.

To Light The Pilot

uPush in the right control knob (the pilot lighting knob) and, while keeping it

depressed, turn anticlockwise through the ignition position marked and up to

the pilot position marked . The spark should light the pilot. The pilot flame can

be seen by looking through the gap in the left front coal –See figure 3.

uWhen the pilot has lit, keep the right hand control knob depressed for a few

seconds to prevent the flame supervision device from shutting off the gas supply

while its probe warms up, as explained above, then release it.

uIf the pilot does not remain alight turn the knob back to the off position marked •.

Wait a few seconds and repeat the lighting sequence.

To Light the Main Burner

uPartially depress the right control knob and turn to the main burner position marked The main

burner should now light.

uThe left-hand knob is for burner flame adjustment. Turning it anticlockwise should gradually

increase the flame height and heat output. Turning clockwise reduces the flame height and heat

output.

uThe burner flame control does not have to be re-set every time the fire is lit. Once set, it can be left

at that position allowing you to use the right hand control only to ignite the burner at the set flame

height.

To Turn Off the Main Burner Only

uTurn the right hand control knob to the pilot position marked .

To Turn Off the Main Burner and Pilot

uTurn the right hand control knob to the pilot position marked . Push the knob in at this position and turn to the off position

marked •.

CLEANING YOUR STOVE

Turn the stove off and allow it to cool before attempting any cleaning. Note that it will retain heat for some time after it has been

turned off.

Cast Iron Surfaces

Regular dusting with a dry cloth is all that should normally be necessary. Any light stains should be removed with a damp cloth. Make sure

that the stove surfaces are completely dry before lighting.

If the paint needs retouching, allow the stove to cool completely. Brush any areas needing attention with a wire brush (Not enamelled

surfaces). Clean off any loose matter. Touch up with DANWIB aps high temperature stove paint. Apply the paint sparingly. Two light coats

are better than one thick coat.

Opening the Windows

The windows are secured with a locking screw. Remove the screw using the special key supplied with the

stove. See figure 4. Always secure the windows with the locking screw to prevent personal injury or

damage while the stove is in use.

The Glass Windows

Any stains on the glass can be removed with a non-abrasive cleaner such as a ceramic hob cleaner. Never

use abrasive cleaners. Clean the windows carefully in accordance with the instructions supplied with the

cleaner.

Figure 3

Figure 2

Figure 4

Ceramic Fuel Pieces and Firebox Walls

This appliance uses firebox walls and fuel effect pieces containing Refractory Ceramic Fibres (RCF), which

are man-made vitreous silicate fibres. Excessive exposure to this material may cause temporary irritation to

eyes, skin and respiratory tract. Consequently, it makes sense to take care when handling these articles to

ensure that the release of dust is kept to a minimum.

Light coatings of soot will usually be burnt off during the normal operation of the fire. Should any soot

accumulation become excessive, the fuel effect pieces should be removed from the fire for cleaning. The

front and rear base coals are fragile and should be handled

carefully. Cleaning should be carried out in a well ventilated

area or in the open air by gently brushing with the pieces held

away from your face so that you avoid inhaling the dust. We

do not recommend the use of a normal domestic vacuum

cleaner which may blow dust back into the air. We suggest

that you remove the coals in the reverse order to that shown

in the fuel bed refitting instructions.

REFITTING THE CERAMIC WALLS &

FUEL PIECES

1. Place the ceramic walls against the firebox sides. Locate

the back edges of the walls in the tabs at the back

corners of the firebox. See figure 5.

2. Place the ceramic rear base coal in position. The front of

the coal must rest behind the two stops at the rear of the burner and not rest on top of

them. See figure 6.

3. Place the left front coal behind the metal lip

at the front of the burner. See figure 7.

4. Place the right front coal behind the metal

lip at the front of the burner. Its left side

should rest over the projection on the left

front coal. See figures 7 & 8.

5. The double top coals are marked “L” and

“R”. Place the coal marked “L” behind the

front left coal. Place the coal marked “R”

behind the front right coal. Place the single

coal between the two double coals. See

figure 9.

7. Close and secure the windows by refitting the locking screw.

MAINTENANCE & SERVICING

Regular maintenance

In order to achieve and maintain high levels of personal safety and performance efficiency,

it is essential that the flue is kept clear of any form of obstruction.

In the United Kingdom it is the law that a landlord must have any gas appliance, flue and

pipework which is situated in a tenant’s premises checked for safety at least every twelve

months by a competent person (In the U.K., a CORGI registered installer).

We recommend that all gas appliances and their flues, wherever situated, are checked annually.

Servicing

•In the United Kingdom servicing can be carried out either by a Wonderfire Service engineer or a CORGI registered installer.

•If you require your fire to be serviced by a Wonderfire Service engineer please contact the Wonderfire service department on

345 626 341 and quote the following details;

a) -model name and number.

b) -appliance serial no.

•In Republic of Ireland call 353 183 75114 for all enquiries.

•If you wish to replace any of the owner replaceable parts listed below, please contact your dealer or the Wonderfire service department

for your nearest stockist of these parts. When ordering please quote the part number shown below.

Description Part No.

Complete set of ceramic coals 572579

Rear base coal piece 572589

Left front base coal 571019

Right front base coal 571029

Bag of 3 top coal pieces 572599

Complete set of ceramic walls 572609

Ceramic left side wall 572619

Ceramic right side wall 572629

Allen key for window opening 572639

Window securing screw 572649

When fitting replacement parts, follow the instructions contained in this guide.

It is important that only approved parts are used for maximum safety.

Figure 9

Figure 8

Figure 7

Figure 6

Figure 5

Altri manuali per 553

Indice

Manuali Stufa popolari di altre marche

Arada

Arada Cassette Stove Manuale utente

Parmco

Parmco FS 600 Manuale utente

MCZ

MCZ SUITE AIR 10 M2 Manuale utente

HearthStone

HearthStone Stowe DV 8321 Guida alla risoluzione dei problemi

Cattara

Cattara FAMILY Manuale utente

Stanley

Stanley Argon F500 OVAL Manuale utente

Avalon

Avalon B-VENT Manuale utente

Nordpeis

Nordpeis Vega Manuale utente

Exquisit

Exquisit EKC601-5 Manuale operativo

Stanley

Stanley Oisin Oil MK II Manuale del proprietario

Thermocet

Thermocet Brookfield S/CC Manuale utente

HASE

HASE delhi Manuale utente

Vermont Castings

Vermont Castings Intrepid 2 Manuale utente

Italiana Camini

Italiana Camini CLASSICA Guida rapida

Avalon

Avalon Vashon Avanti DVS FS Manuale utente

Spartherm

Spartherm ambiente a1 Manuale utente

Dimplex

Dimplex MCFSTV12AU Manuale utente

Warmlite

Warmlite WL46040 Manuale utente