Motic AE2000 Ergo Manuale utente
1
We are constantly endeavouring to improve our instruments and to adapt them to the requirements of
modern research techniques and testing methods. This involves modification to the mechanical
structure and optical design of our instruments.
Therefore, all descriptions and illustrations in this instruction manual, including all specifications are
subject to change without notice.
2
Content
I. Nomenclature 4
1. Application 4
2. Nomenclature 4
3. Technical data 7
II. Setting-up the Instrument 8
1. Working Environment 8
2. Input voltage and power 8
III. Assembling the Microscope Input Voltage 10
1. Installing the bulb 10
1.1 Halogen bulb 12
1.2 LED module 12
2. Filter Holder 13
3. Mounting the Condenser 13
4. Installing the Objectives 14
5. Mechanical Stage 14
6. Mounting the Eyepieces 15
IV. Microscopic Procedure 16
1. Interpupillary Distance Adjustment 16
2. Diopter Adjustment 16
3. Coarse and fine focusing 17
4. Coarse focus torque adjustment 17
5. Change the illumination between Halogen and LED 18
6. Brightfield Microscopy 19
7. Phase-Contrast Microscopy 19
8. Filter selection 21
9. Auto power off function 21
V. Photomicrographic Procedure (Model AE2000 trinocular) 23
1. Brightfield photomicrography 23
3
VI. Troubleshooting Table 24
1. Optical and Operating Problems 24
2. Electrical 25
VII. Care and Maintenance 25
1. Lenses and Filters 25
2. Cleaning of Painted or Plastic Components 25
3. When Not in Use 26
4. Warning lable 26
4
I. Nomenclature
1. Application
AE2000 incorporates the Color Corrected Infinity Optical System (CCIS) that offers superior image
quality for the transmitted and reflected illumination in the application of Living organism and tissue
observation, Petri dish observation, Live cell in culture observation.
2. Nomenclature
Model AE2000
5
Model AE2000
6
Model AE2000 TRI
Model AE2000 Ergo
7
3. Technical data
Technical data AE2000 AE2000 TRI AE2000 Ergo
Optical system Color-corrected infinity optics
Total Magnification 40X - 400X
Eyepiece tubes
360° rotatable Siedentopf with upper and lower position: upper position
offers approx. 40 mm extra viewing height
Interpupillary distance: 48 mm to 75 mm
Binocular 45° incline Trinocular 45°incline Ergo incline: 45°± 15°
Eyepiece N-WF 10X(ø20), wide field, high eye point
Nosepiece 4x, inclined backwards
Stage Fixed, Dimensions (width x depth): 200 x 239mm
Stage height 192mm
Object guide Verniers with numerical and alphabetic scale
X direction: numerical scale, readable from right to left
Y direction: alphabetic scale
Objectives
Plan-Achromat 4x, N.A. 0.1, W.D. 12.6mm
Plan-Achromat 10x, N.A. 0.25, W.D. 16.8mm
LWD Plan-Achromat 20x, N.A. 0.3, W.D. 4.7mm
LWD Plan-Achromat 40x, N.A. 0.5, W.D. 3mm
Plan-Achromat PH 4x Ph0, N.A. 0.1, W.D. 12.6mm
Plan-Achromat PH 10x Ph1, N.A. 0.25, W.D. 4.1mm
LWD Plan-Achromat PH 20x Ph2, N.A. 0.3, W.D. 4.7mm
LWD Plan-Achromat PH 40x Ph2, N.A. 0.5, W.D. 3mm
Condenser N.A. 0.3, W.D. 72mm
N.A. 0.4, W.D. 53mm
N.A. 0.5, W.D. 28mm
Coarse drive 42mm/rev.
Fine drive 0.2mm/rev.
Transmitted
illumination 6V/30W Halogen
3W LED
Dimension: W x D x H 217.5 x 556 x 497mm
8
II. Setting-up the Instrument
1. Working Environment
The location should be free from dust, moisture, chemical vapours and from mechanical vibrations.
Don't locate the instrument in bright or direct ambient light, in front of a lamp, or a will-lit bright wall. Best
image will be achieved without significant ambient light.
Environmental specification:
yIndoor use
yAltitude: Max 2000m
yAmbient temperature: 15°C~ 40°C;
yMaximum relative humidity: 75% for temperature up to 31°C decreasing linearly to 50% relative
humidity at 40°C
ySupply voltage fluctuations: Not to exceed ±10% of the normal voltage
yPollution degree: 2 ( in according with IEC60664)
yInstallation/Overvoltage category: 2 (in according with IEC60664)
yAir Pressure of 75kPa to 106 kPa
2. Input voltage and power
Automatic voltage selection works with electrical outlets worldwide. It is advised to always use a power
cord that is rated for the voltage used in your area and that has been approved to meet local safety
standards. Using the wrong power cord could cause fire or equipment damage.
In order to prevent electric fluctuation to the instrument electrics, always turn the power switch on the
instrument off before connecting the power cord.
This equipment must be used with UL60950-1 Listed power supply (E246759), MFR: LI TONG
ELECTRONICS CO., LTD. Model: LTE50E.S2.3.
yInput Voltage: 12VDC
yInput Power: 48W
yPower adaptor input rating: 100-240Vac, 47-63Hz, 1A
9
Attention: The plug of power adaptor is the "disconnect device" for whole unit. To save energy and
environmental priciple, we recommend you to pull out the plug if you will not use the device in long time.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Motic Microscopio
Motic
Motic BA410 Series Manuale utente
Motic
Motic SFC-11 Series Manuale utente
Motic
Motic SMZ Series Manuale utente
Motic
Motic SFC-3 Series Manuale utente
Motic
Motic Moticam Manuale utente
Motic
Motic BA210 series Manuale utente
Motic
Motic BA310 Pol Manuale utente
Motic
Motic SFC-100 Series Manuale utente
Motic
Motic SILVER150 Series Manuale utente
Motic
Motic SMZ168 Series Manuale utente
Motic
Motic 18 LED Series Manuale utente
Motic
Motic SWIFTLINE MAE-31R Manuale utente
Motic
Motic BA210 series Manuale utente
Motic
Motic B1-212 Manuale utente
Motic
Motic SILVER100 Series Manuale utente
Motic
Motic M3600 Series Manuale utente
Motic
Motic AE2000 BIN Manuale utente
Motic
Motic PM-1805 Manuale utente
Motic
Motic SILVER30 Series Manuale utente
Motic
Motic K Series Manuale utente
