Motion CM-06 Manuale utente
CM-06
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Li-ion battery powered tube motors with
pull and remote operation
MANUAL CM-06
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Motor features
Control options
Support
CM-06
Li-ion battery powered tube motors
with pull and remote operation
Pull Control
Operate with
pull control
Li-ion Battery
Integrated
lithium-ion battery
Remote Control
Operate with a
remote control
USB Rechargeable
Rechargeable with
USB -C cable
App Control
Operate with the
MOTION Blinds app
Bluetooth Control
Operate with the
MOTION Blinds
Bluetooth app
Wireless
Cable free
installation
Connectivity
Compatible with
home and building
automation
Speed Control
Consistent
rolling speed
Bi-directional
Two-way
communication for
real-time response
Support
Video
How to install,
program and operate
rtube.nl/red1613
2
Conforms to
UL Std. 325
Certified to
CSA Std. C22.2#247
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
WARNING
Read the instructions carefully
before assembling and
using the product. Assembly
can be completed by non-
professionals. For indoor use
only.
Young children can strangle
themselves with the loop
of pull cords, chains and
tapes, and cords that operate
window coverings.
To avoid strangulation and
entanglement, keep cords out
of reach of young children.
Cords may ensnare a child’s
neck.
Move beds, cots and furniture
away from window covering
cords.
Do not tie cords together.
Make sure cords do not twist
together and form a loop.
Cleaning
Follow these general rules when cleaning the outside
of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
Do not use aerosol sprays, solvents, alcohol, or
abrasives.
Service & Support
Do not perform repairs yourself. Do not attempt to
open the device or disassemble it. You run the risk of
electric shock and voiding the limited warranty. No
user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the product
appears to be damaged or does not function properly,
go to your local dealer for instructions on how to obtain
warranty service.
Recycle
This marking indicates that this product should not
be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please
use the return and collec-tion systems or contact the
retailer where the product was purchased. They can
take this product for environmental safe recycling.
English
3
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Important Safety instructions
WARNING: To reduce the risk of severe injury or
death, it is important to follow these instructions for
personal safety. Save these instructions.
Read and follow all installation instructions.
This appliance can be used by children aged
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children should not play with
the appliance. Cleaning and user maintenance
should not be performed by children without
supervision.
Do not allow children to play with fixed controls.
Keep remote controls away from children.
Frequently examine the installation for imbalance
and signs of wear or damage to cables and
springs. Do not use if repair or adjustment is
necessary.
This instruction manual is also available on the
website.
The drive must be disconnected from its power
source during cleaning, maintenance and when
replacing parts.
The A-weighted emission sound pressure level of
the drive is equal to or less than 70dB(A).
Indoor and household use only.
Disconnect the drive from the power supply
or switch off the automatic controls when
maintenance, such as window cleaning, is being
carried out in the vicinity.
When operating a biased switch, make sure that
other persons are kept away.
Do not operate when maintenance, such as
window cleaning, is being carried out in the
vicinity.
The tube motor must only be supplied with safety
extra low voltage corresponding to the marking on
the appliance.
Important Installation instructions
WARNING: Important safety instructions. Follow all
instructions, since incorrect installation can lead to
severe injury.
This motor can only be used with soft material for
driven parts.
Hazardous unprotected moving parts of the drive
must be installed higher than 2.5m above the
floor or any other level surface that could provide
access to it.
Install the actuating member of a manual release
at a height less than 1.8m.
The actuating member of a biased switch is to be
located within direct sight of the driven part but
away from moving parts. It is to be installed at a
minimum height of 1.5m and not accessible to
the public.
The mass and the dimension of the driven part
must be compatible with the rated torque and
rated operating time.
Fixed controls have to be clearly visible after
installation.
The driven part must be compatible with the
rated torque 6 N.m and rated operating time
(12 min).
Minimum tube diameter: Ø35mm.
The drive is intended to be installed at a height
of at least 2.5m above the floor or any other
accessible level surface.
All-pole disconnection switches must be
incorporated in the fixed wiring in accordance with
the wiring rules.
The appliance must only be supplied at safety
extra low voltage corresponding to the marking on
the appliance.
Before installing the drive, remove any
unnecessary cords or components and disable
any equipment not needed for powered operation.
4
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
FCC Manual | FCC ID: ZY4CM06
Regulatory Information
1 FCC Information for User
This product does not contain any user
serviceable components and is to be used with
approved antennas only. Any product changes or
modifications will invalidate all applicable regulatory
certifications and approvals.
2 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired
operation.
3 FCC Radio Frequency Interference
statement
This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference, in which case the
user will be required to correct the interference at
their own expense. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna
Increase the distance separating the equipment
and receiver
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV
technician for help
EU Declaration
Hereby, Coulisse declares that the radio
equipment type CM-06 is in compliance whith
directive 2014/53/EU.
The full text of the EU declaration of conformity
is available at the following internet address:
www.my.coulisse.com
English
5
1
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Install your blind
6
2
2
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
English
Download the MOTION Blinds bluetooth app
Download the MOTION Blinds app
Scan the QR code on your blind with the MOTION Blinds Bluetooth app to set your end limits and,
once the end limits have been set, you can control your blinds with your phone. To set the end limits
without your phone, please continue to step 3.
With the MOTION Blinds bridge you can unlock more options, such as voice assistants and the ability
to control your blinds when you are not at home.
App Store
Download the
MOTION Blinds
Bluetooth app
rtube.nl/red1614
App Store
Download the
MOTION Blinds
Wi-Fi app
rtube.nl/red981
Google Play
Download the
MOTION Blinds
Bluetooth app
rtube.nl/red1615
Google Play
Download the
MOTION Blinds
Wi-Fi app
rtube.nl/red982
7
3
4
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Activate the motor by charging it with a USB C cable. A green LED will start flashing.
The motor can be used during charging.To activate the motor without a USB C
cable, see step 18)
Activate the motor
Roller blind
Roman blind
Find the program button on your blind
Venetian blind
8
5.1
5.2
5.3
5
6.1
6.2
6
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Shortly press the program button on the
motor. The blind will start stepping, indicating
that program mode has been activated.
(The blind remains stepping until the program
mode is de-activated.)
Repeat steps 5.1 - 5.3 to remove a blind from
a channel.
Press the pair button on the back of the remote
control to pair the blind to the selected channel.
The blind will shortly stop stepping indicating
that the remote has been paired to the blind.
Select a desired channel for the blind using the
channel selection button on the remote control.
Channel
Selection Pair
Button
Channel
indicator
Pair a remote
English
Up
Down
Pair a remote control that is able to program blinds. In this manual
CM-12 is displayed.
Shortly
press
Shortly press the down button to check if the
blind unrolls the right way. If the blind moves
up the direction of rotation must be changed.
Simultaneously press the up and down button
to change the direction of rotation.
End limits must be programmed to use a blind properly and to prevent it from being damaged.
Proceed to step 11 if end limits are already set.
WARNING: risk of damage.
Stop the blind before reaching
the end positions.
Check direction of rotation
9
8
7
8.1
7.1
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Set bottom position
Down
Up
Center
Press and hold the down button until the
blind reaches the desired bottom position.
WARNING: Risk of damage.
Slowly approach the bottom position.
Simultaneously hold the center and the up
button until the blind stops stepping and
starts stepping again.
The bottom position has been saved.
10
Indice
Lingue:
Altri manuali Motion Motore
Motion
Motion CM-03 Manuale utente
Motion
Motion CM-07 Manuale utente
Motion
Motion CM-09 Manuale utente
Motion
Motion CM-04 Manuale utente
Motion
Motion CM-05 Manuale utente
Motion
Motion CM-36 Manuale utente
Motion
Motion CM-08 Manuale utente
Motion
Motion CM-09MC Manuale utente
Motion
Motion CMD-02 Manuale utente
Motion
Motion CM-40 Manuale utente
