MOTO GUZZI V85 E4 Guida
SERVICE STATION MANUAL
2Q000383
Engine V85 E4
SERVICE STATION
MANUAL
Engine V85 E4
THE VALUE OF SERVICE
As a result of continuous updates and specific technical training programmes for Moto Guzzi products,
onlyMotoGuzziOfficialNetworkmechanicsknowthisvehiclefullyandhavethespecifictoolsnecessary
to carry out maintenance and repair operations correctly.
Thereliabilityofthevehiclealsodependsonitsmechanicalconditions.Checkingthevehiclebeforeriding
it, its regular maintenance and the use of original Moto Guzzi spare parts only are essential factors!
For information on the nearest Official Dealer and/or Service Centre consult our website:
www.motoguzzi.com
Only by requesting Moto Guzzi original spare parts can you be sure of purchasing products that were
developed and tested during the actual vehicle design stage. All Moto Guzzi original spare parts undergo
quality control procedures to guarantee reliability and durability.
Thedescriptionsandimagesinthispublicationaregivenforillustrativepurposesonlyandarenotbinding.
While the basic characteristics as described and illustrated in this booklet remain unchanged, Piaggio &
C.S.p.A. reserves theright, at anytime and withoutbeing required toupdate this publicationbeforehand,
to make any changes to components, parts or accessories, which it considers necessary to improve the
product or which are required for manufacturing or construction reasons.
Notallversions/modelsshowninthispublicationareavailableinallcountries.Theavailabilityofindividual
versions should be checked with the Official Moto Guzzi sales network.
The Moto Guzzi brand is owned by Piaggio & C. S.p.A.
© Copyright 2021 - Piaggio & C. S.p.A. All rights reserved. Reproduction of this publication in whole or
in part is prohibited.
Piaggio & C. S.p.A. Viale Rinaldo Piaggio, 25 - 56025 PONTEDERA (PI), Italy
www.piaggio.com
SERVICE STATION MANUAL
Engine V85 E4
This manual provides the main information to carry out regular maintenance operations on your vehicle.
This manual is intended to Moto Guzzi Dealers and their qualified mechanics; several concepts have
been deliberately omitted as they are considered unnecessary. As it is not possible to include complete
mechanical notions in this manual, users should have basic mechanical knowledge or minimum
knowledge about the procedures involved when repairing vehicle. Without this knowledge, repairing or
checking the vehicle may be inefficient or even dangerous. As the vehicle repair and check procedures
are not described in detail, be extremely cautious so as not to damage components or injure individuals.
In order to optimise customer satisfaction when using our vehicles, Piaggio & C. S.p.a. commits itself
to continually improve its products and the relative documentation. The main technical modifications and
changes in repair procedures are communicated to all Moto Guzzi Sales Outlets and its International
Subsidiaries. These changes will be introduced in the subsequent editions of the manual. In case of
need or further queries on repair and check procedures, consult Moto Guzzi CUSTOMER
DEPARTMENT, which will be prepared to provide any information on the subject and any further
communications on updates and technical changes related to the vehicle.
NOTE Provides key information to make the procedure easier to understand and carry out.
CAUTION Refers to specific procedures to carry out for preventing damages to the vehicle.
WARNING Refers to specific procedures to carry out to prevent injuries to the repairer.
Personal safety Failure to completely observe these instructions will result in serious risk of personal
injury.
Safeguarding the environment Sectionsmarked withthis symbol indicate the correctuse of the vehicle
to prevent damaging the environment.
Vehicle intactness The incomplete or non-observance of these regulations leads to the risk of serious
damage to the vehicle and sometimes even the invalidity of the guarantee
INDEX OF TOPICS
CHARACTERISTICS CHAR
SPECIAL TOOLS S-TOOLS
ENGINE ENG
INDEX OF TOPICS
CHARACTERISTICS CHAR
Tightening Torques
If the following tables do not expressly indicate the tightening torque values, refer to the table with the
generic torque values indicated below.
GENERAL TIGHTENING TORQUES
M4 M5 M6 M8 M10 M12
Metric tightening torque: TE - TEFL - SHC - TBEI
- TCC - TS 3 Nm (2.21
lbf ft) 6 Nm (4.43
lbf ft) 10 Nm
(7.38 lbf ft) 25 Nm
(18.44 lbf
ft)
50 Nm
(36.88lbft) 80 Nm
(59.00lbft)
GENERAL TIGHTENING TORQUES FOR SELF TAPPING SCREWS FOR PLASTIC
2.9 mm 3.9 mm 4.2 mm 5 mm
Tightening torque 2 Nm (1.48 lb ft) 2 Nm (1.48 lb ft) 3 Nm (2.21 lbf ft) 3 Nm (2.21 lbf ft)
CAUTION
THE SCREWS WITH THREAD-LOCK SEALANT (PRE-IMPREGNATED) MUST BE REPLACED
WITH NEW SCREWS AFTER THEY HAVE BEEN LOOSENED.
BEFORE FITTING THE NEW SCREWS, CLEAN THE THREADED HOLES CAREFULLY, MAKING
SURE THAT ALL TRACES OF THE OLD THREAD-LOCK SEALANT HAVE BEEN ELIMINATED.
Engine
CARTERS
Pos. Description Type Quantity Torque Note
1 Oil sump SHC screws M6 2 11-13 Nm (8.11-9.59 lb
ft) -
2 Crankcase half flanged nuts (pre-
tightening) M10 4 22-27 Nm (16.23-19.91
lb ft) -
2 Crankcase half flanged nuts (final
tightening) M10 4 44-49 Nm (32.45-36.14
lb ft) -
Engine V85 E4 Characteristics
CHAR - 7
Pos. Description Type Quantity Torque Note
3 Crankcase half nuts M8 6 22-25 Nm (16.23-18.44
lb ft) -
4 Crankcase half stud bolts M10 4 22-25 Nm (16.23-18.44
lb ft) Pre-applied Loct.;
alternatively Loct.
2510
5 Crankcase half stud bolts M8 4 22-25 Nm (16.23-18.44
lb ft) Loct. 648
6 Crankcase half stud bolts M8 2 22-25 Nm (16.23-18.44
lb ft) Loct. 648
7 Long/short head stud bolts M10 8 9-11 Nm (6.64-8.11 lb
ft) Pre-applied Loct.;
alternatively Loct.
DRI-LOC 211 / 3M
SCOTCH GRIP
2510
8 Central head stud bolts M8 2 9-11 Nm (6.64-8.11 lb
ft) Pre-applied Loct.;
alternatively Loct.
DRI-LOC 211 / 3M
SCOTCH GRIP
2510
9 Oil filter joint M12 1 20-24 Nm (14.75-17.70
lb ft) -
10 Cap M14 1 15-19 Nm (11.06-14.01
lb ft) Pre-applied Loct. -
LOCTITE DRI-
SEAL 506 alterna-
tively LOCTITE
5061 - Regularly
checkthatthe capis
at the same level
with the surface
THROTTLE BODY
Pos. Description Type Quantity Torque Note
1 Intake fittings screws M6x22 6 9-11 Nm (6.64-8.11 lb
ft) -
Characteristics Engine V85 E4
CHAR - 8
HEADS COVERS
Pos. Description Type Quantity Torque Note
1Sparkplugs coverhex socketscrews M5x12 8 6-8 Nm (4.42-5.90 lb ft) -
2 Head covers screws M6 6 9-11 Nm (6.64-8.11 lb
ft) -
3 Rounded head torx screws for spark
plugs cable clamp on head covers M4 4 2.6-3.1 Nm (1.92-2.29
lb ft) -
- Spark plugs - 2 10-12 Nm (7.38-8.85 lb
ft) -
Engine V85 E4 Characteristics
CHAR - 9
HEAD - VALVES
Pos. Description Type Quantity Torque Note
1 Stud bolts for exhaust manifolds M8 4 20-24 Nm (14.75-17.70
lb ft) -
TIMING SYSTEM
Pos. Description Type Quantity Torque Note
1 Tone wheel flanged hex head screw M7x18 1 16-17 Nm (11.80-12.54
lb ft) Pre-applied Loct. -
3M SCOTCH-GRIP
2363 or PRELOK
PRECOTE 80 or
Loct. 2048
2 Timing system sprocket flanged hex
head screws M6 3 9-11 Nm (6.64-8.11 lb
ft) Pre-applied Loct.;
alternatively 3M
SCOTCH-GRIP
2353
3 Chain tensioner screw M6 1 9-11 Nm (6.64-8.11 lb
ft) -
4Camshaft retainer plate torx rounded
head screws M5x12 2 6-7 Nm (4.42-5.16 lb ft) Pre-applied Loct.;
alternatively 3M
SCOTCH-GRIP
2353
5Rocker axles forks hex head flanged
screws M5x12 4 5-6 Nm (3.69-4.42 lb ft) Loct. 243
6FlangedHHscrewsforground plates
on rocker supports M5x12 2 5-6 Nm (3.69-4.42 lb ft) Loct. 243
7 Stud bolt fixing nuts (pre-tightening) M10 8 13-16.6Nm (9.59-12.24
lb ft) Lubricate the
threads and the
supportsurfacewith
MOLYCOTE
GRAPID PLUS
SPRAY grease
7Stud bolt fixing nuts (final tightening) M10 8 87°-93° - 24-34 Nm
(17.70-25.08 lbf ft) Lubricate the
threads and the
supportsurfacewith
MOLYCOTE
GRAPID PLUS
SPRAY grease
Characteristics Engine V85 E4
CHAR - 10
Altri manuali per V85 E4
1
Indice
Altri manuali MOTO GUZZI Motore
