Motolux 802322012 Manuale di installazione
Australian owned
Australian designed
61 (0)3 9876 0400
www.motolux.com.au
Ordering Information
Australia / New Zealand
Should you need to reset a motor back to Factory Settings you will need to push the button inside the hole in the Head of the
Motor Five Times in quick succession holding the button in on the Fifth Push, you will get a Double Jiggle indicating the
motor has been reset and all Limits and Pairing have been deleted.
Example: Putting 5 blinds all on Channel Six.
1. Start by selecting the channel that you want to pair the motor with on the remote control.
2. Insert Paper Clip in Hole of Motor for approx. 1 second and the motor will give a jiggle, then on the Remote push the Up Button.
3. The motor will jiggle to indicate that it is paired.
1. If the direction is correct there is no action required move to Limit Setting. If the direction is wrong, Push and hold the Stop
Button until you get a Jiggle from the motor then push the Down Button.
2. Test the blind and the direction should be correct.
1. Push and hold the button in the Setting Hole on the remote with a Paper Clip until you get a jiggle – now move the blind to
where you would like the Top Limit to be – now push and hold the button in the Setting Hole on the remote, you will get a jiggle.
2. Move the blind to where you would like the Bottom Limit to be – now push and hold the button in the Setting Hole on the
remote, you will get a jiggle.
3. Very Important: Push and hold the button in the Setting Hole on the remote, you will get a jiggle. This has now recorded the
limits, please test the blind.
The above will need to be done for Each Different Motor on Each Different Channel.
1. On the Remote go to Blind 1 on Channel 1 – Push and Hold the Stop Button until you get a jiggle. Now go to Channel 6 and
push and hold the Up Button you will get a Jiggle. Blind 1 is now added to Channel 6.
2. On the Remote go to Blind 2 on Channel 2 – Push and Hold the Stop Button until you get a jiggle. Now go to Channel 6 and
push and hold the Up Button you will get a jiggle. Blind 2 is now added to Channel 6.
Repeat these steps until you have moved all blinds over to channel 6.
This feature can also be used to transfer motors onto other Remote Controls.
Pairing the Motor to the Remote
Check/Set the Direction
Resetting a Motor Back to Factory
To Add Multiple Blinds to a Group Channel
Limit Setting: TOP LIMIT FIRST
PROGRAMMING INSTRUCTIONS 1/2
Firstly you will need something small enough to put in the both the hole in the head of the motor and in the setting hole on
the remote control, a Paper Clip or Jewelers Screwdriver is perfect.
Install the blind and t the Battery Wand Clips in the desired position making sure the position is not too far from the motor
with enough for both cables to plug together. Install 8x AA Batteries into the Battery Wand and plug the male and female
plug ends together and clip the wand into position, you should hear a beep indicating the motor has powered on. If no Beep is
heard: Find the hole in the head of the motor and insert a paper clip and give the button inside a quick push, you should get a
Beep indicating the motor is now powered on.
25MM DC EXTERNAL BATTERY 1.2NM MOTOR - 802322012 (MT25-1.2-28-12DE)
Motolux is a world-class manufacturer of motorisation products and systems dedicated to window covering markets
worldwide. A designer and manufacturer of a fully integrated range of motorisation solutions, Motolux products are
suitable for commercial or residential use. Our high quality product range is streamlined to simplify the process of
manufacturing, installation and ongoing maintenance of almost any type of motorised window covering product.
REVISION 2 - 2020
Australian owned
Australian designed
61 (0)3 9876 0400
www.motolux.com.au
Ordering Information
Australia / New Zealand
PROGRAMMING INSTRUCTIONS 2/2
The above are simple programming steps but there are more functions this motor can perform.
Motolux battery motors have a low power feature, designed to signicantly extend battery life. Because of this feature,
to use the remote, a slightly longer push of the buttons on the remote is required (approximately 1 second), in order to
wake the motor up and operate the blind as normal.
1. Intermediate Limits: Other than the Top and Bottom Limits this motor can store an additional four Intermediate Limits.
To set Intermediate Limits: After setting the top and bottom limits and exiting the program mode, move the blind to where you
would like an intermediate limit set. Press the button in the setting hole in the back of the remote control until you get a jiggle
now press the button in the setting hole on the back of the remote a second time, you will get a jiggle. An intermediate limit has
now been set.
When operating the blind if you do not want to stop at the intermediate limit: Press the button for the direction that you
would like the blind to move in, once the blind starts moving press the same button a second time and it will skip that limit and
continue onto the furthest limit.
2. Adjusting a Limit after it has been set: Move the blind to the limit that you wish to adjust, press the button in the setting
hole on the back of the remote until you get a jiggle, now move the blind to the new limit position and press the button in
the setting hole on the back of the remote; the blind will jiggle and the limit has been adjusted.
3. To delete an Intermediate Limit or Bottom Limit (Top limit cannot be deleted in this manner): Move to the limit that
you wish to delete, push the button in the setting hole on the back of the remote and keeping the button pushed in, the
blind will jiggle once and then a second time approximately 5 seconds later indicating that the limit has been deleted.
Additional Features
Motolux is a world-class manufacturer of motorisation products and systems dedicated to window covering markets
worldwide. A designer and manufacturer of a fully integrated range of motorisation solutions, Motolux products are
suitable for commercial or residential use. Our high quality product range is streamlined to simplify the process of
manufacturing, installation and ongoing maintenance of almost any type of motorised window covering product.
REVISION 2 - 2020
25MM DC EXTERNAL BATTERY 1.2NM MOTOR - 802322012 (MT25-1.2-28-12DE)
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Motolux Motore
