motorini XP50 Manuale utente

XP50 –XP125


Dear user:
Thank you for choosing to buy a Motorini XP
This manual provides the correct operation and maintenance methods for safe riding and
maintaining the efficiency of your scooter.
Please read the owner’s handbook supplied with your Motorini carefully and make sure all routine
maintenance and servicing is carried out by the specialist staff of a Motorini dealer.
Important notice
The scooter is designed to carry one rider and one passenger, do not carry things over the maximum
load capacity of the scooter.
The scooter is only designed to be used on the road.
Pay special attention to the sentences and paragraphs with the following warning symbols.

Index
I.Safe Riding
1. Rules for safe riding
2.Load capacities
II. Components
1.VIN and Engine number
2.Gauges and indicators
III.Operation guide
1.Right hand switch
2.Left hand switch
3.Ignition switch
4.Fuel tank
5.Luggage compartment
6.Centre stand
IV.Riding the vehicle
1.Daily checks
2.Tyre size and pressures
3.Refuelling
4.Starting the engine
5.Stopping the engine
6.Running in
V.Maintenance
1.Engine oil
2.Engine oil level Check
3.Gear oil
4.Spark plug
5.Brake fluid
6.Air filter
7.Battery

I. Safe riding
Warning: When riding the scooter please observe the
following safety rules.
Safe riding rules
1. Before riding please carry out daily checks.
2. Most accidents occur when other road users
cannot see you; make yourself as visible as possible.
For example
Wear visible clothing.
Do not ride in other driver’s blind spots.
1. Speeding is a major cause of accidents, always
obey the speed limit.
2. Always make other road users aware (with
indicators) when you intend to change lanes or
when turning.
3. Be more careful when approaching crossings,
Schools, parked cars etc.
4. Always ride with both hands on the handlebars and
feet firmly on the footboard.
5. Do not leave the scooter unattended with the
engine running.
6. Avoid riding on uneven roads with pot holes as this
may damage the scooter.
Never overload the scooter, and
observe the Max Load capacities.
Rear carrier 5 Kg
Front luggage box 1 Kg
Under seat storage 10Kg

II Components
(1) Head Light
(2) Front Indicator
(3) Rear Brake
(4) Rear View Mirror
(5) Seat
(6) Tail Light
(7) Rear Indicator
(8) Engine
(9) Passenger Foot Rest
(10) Main Stand
(11) Side Stand

1. Scooter VIN and Engine Number
The scooter VIN number is stamped on the frame
behind the access panel.
The engine number is stamped on the left hand
engine case.
Please write down frame and engine number.
(1) (2)
VIN Number________________________________
Engine Number_____________________________
2. Gauges and Indicators.
The function of each indicator light is listed on the
table opposite. (1) (3)
(5) (4)
(2) (2)
1
Speedo
2
Indicator Warning Light
3
Main Beam
4
Fuel Gauge
5
Milometer
Fuel Gauge
The fuel gauge (1) indicates the approximate fuel in
the tank. When the needle points to (F) it indicates
the tank is full.
(2) (1)
When the needle enters the red warning (2) please
refuel.

III Operating Guide
(1) Right Handlebar Switch
(1) Engine Kill Switch
Stops the engine
Starter button (2)
The starter button (2)
Operates the electric starter. For the starter to
operate the ignition switch must be turned to the
(ON)position and the front or rear brake lever must
be pulled to the handlebar.
(2) Left Handlebar Switch
(3)
(1)(2)
Horn button (1)
When the horn button is pushed, the horn will sound.
Direction indicators switch (2)
Move the switch to the right to activate the right-
hand indicators and to the left to activate the left-
hand indicators Push the central button to deactivate
the turn indicators.
Headlight Dip Switch (3)
The headlight dip switch (3).
To select high beam, push the switch (3) to the
forward position.
To select low beam, push the switch (3) to the
backwards position.

(3) Ignition Switch
The ignition switch (1) is located on the inner leg
shield and is a 3 position key-operated switch. By
rotating the key, it is possible to turn the switch to
any of the following positions:
(OFF): the engine cannot be started.
(ON): the engine can be started.
(LOCK): turn the handlebars fully to the left, push the
key down and turn anti-clockwise, the steering is now
locked and the engine may not be started.
(1)
(4) Fuel Tank
The Fuel Tank is behind the seat, the cap (1) is visible
on the XP 50, to gain access to the cap (1) on the XP
125 you will need to lift the seat.
To open the cover of the fuel cap, insert key into the
lock (2) and turn clockwise.
After refuelling always check that the filler cap is cor-
rectly located and closed, push down on the cap until
you hear it click.
(1) (2)

(5) Luggage Compartment
To gain access to the luggage compartment (1)
proceed as follows:
Insert your key into lock (2) and turn clockwise.
To close the seat, proceed as follows:
Do not let the seat fall from the fully open position.
Lower it on to the lock and slightly press it down in
order to engage the seat with the lock.
(1)
(2)
(6) Centre Stand
Push the stand bracket (1) downwards with your foot,
whilst easing the vehicle backwards until it rests
safely on the centre stand.
Do not sit on the vehicle when it is resting on
the centre stand.
Always park on a firm, level surface to prevent the
vehicle from falling.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali motorini Scooter


















