• Table A changing the combination associated with channel 1 (◄)
This function allows you to change the combination associated with channel 1 (◄):
1 • Press the "0" key and hold it down while pressing and releasing “◄”;
2 • Release the “0” and “◄” keys;
3 • Type in the current (original) combination and press “◄” (Original - 11, or the code that was
being used);
4 • Type in the new combination (up to 8 digits ) pressing “◄”;
5 • Type in the new combination again and press “◄” (the keyboard will emit one long beep
confirming the operation's sucess. If it emits several beeps, repeat the operation).
• Table B changing the combination associated with channel 2 (►)
This function allows you to change the combination associated with channel 2 (►):
1 • Press the "0" key and hold it down while pressing and releasing “►”;
2 • Release the “0” e "►" keys;
3 • Type in the current (original) combination and press “►” (Original - 22, or the code that was
being used);
4 • Type in the new combination (up to 8 digits ) and press “►”;
5 • Type in the new combination again and press “►”(the keyboard will emit one long beep
confirming the operation's sucess. If it emits several beeps, repeat the operation).
Table C normal use for activation of channel 1
1 • Type in the combination associated with channel 1;
2 • Press “◄”.
Table D normal use for activation of channel 2
1 • Type in the combination associated with channel 2;
2 • Press “►”.
To reset the keyboard, it must be sent to our technical services.
The use of the keypad is based on "combinations", i.e.numbers of from 1 to 9 digits that the user
is required to key in by means of the keys. Once the combination has been entered the user then
presses confirm key ◄or►, to transmit the activation command to, respectively:
• receiver channel 1 if the user presses ◄
• receiver channel 2 if the user presses ►
The command will be transmitted only when a valid combination has been entered:if an incorrect
combination has been entered the selector will emit an error, warning signal when the confirm
key is pressed .The combination entered must be exact, if, for example ,the correct combination
is 0422, the following attempts will be interpreted as errors: 422, 10422, 04222. Therefore, if the
user inadvertently presses the wrong key when entering a combination, combination key ◄ or ►
should be pressed immediately to generate the error tone , after which the correct combination
can be entered starting from the beginning again.
While entering the combination no more than 6 seconds can be allowed to elapse between
keystrokes,after which interval the combination must be re-entered starting from the beginning.
The units are factory programmed with a standard combination to activate channel one and a
standard combination for channel two.
The factory set combinations are as follows:
• When the unit is used for the first time this combination is 11 ◄
• When the unit is used for the first time this combination is 22 ►
CHANGING A COMBINATION
NORMAL USE
RESET THE UNIT TO FACTORY SETTINGS
METHOD OF USE If combinations are set without entering any number, the security system is
effectively overridden and the command can be transmitted simply by pressing
◄or ► without having to first enter a combination.
If the two combinations you have entered are identical, once you have entered the
combination you can press either“◄” or “►”.
