Motorola M68EML08EY Manuale utente

EML08EYUM/D

Version 1.0

May 2, 2002

User’s Manual

M68EML08EY

Emulation Module

User’s Manual

M68EML08EY Emulation Module - Version 1.0 User’s Manual

2MOTOROLA

Important Notice to Users

While every effort has been made to ensure the accuracy of all information in

this document, Motorola assumes no liability to any party for any loss or

damage caused by errors or omissions or by statements of any kind in this

document, its updates, supplements, or special editions, whether such errors are

omissions or statements resulting fromnegligence, accident, or any other cause.

Motorola further assumes no liability arising out of the application or use of any

information, product, or system described herein: nor any liability for incidental

or consequential damages arising from the use of this document. Motorola

disclaims all warranties regarding the information contained herein, whether

expressed, implied, or statutory, including implied warranties of

merchantability or fitness for a particular purpose. Motorola makes no

representation that the interconnection of products in the manner described

herein will not infringe on existing or future patent rights, nor do the

descriptions contained herein imply the granting or license to make, use or sell

equipment constructed in accordance with this description.

Trademarks

This document includes these trademarks:

Motorola and the Motorola logo are registered trademarks

of Motorola, Inc.

Windows is a registered trademark of Microsoft Corporation in the U.S.

and other countries.

Intel is a registered trademark of Intel Corporation.

Motorola, Inc., is an Equal Opportunity / Affirmative Action Employer.

For an electronic copy of this book, visit Motorola’s web site at http://e-www.motorola.com/

User’s Manual M68EML08EY Emulation Module - Version 1.0

MOTOROLA Table of Contents 1

User’s Manual —M68EML08EY Emulation Module

Table of Contents

M68EML08EY Quick Start Guide

1 - Set jumpers W4 and W2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2 - Install the emulation module into your development system . . . . . 7

3 - Connect the emulation module to your target system . . . . . . . . . . . 8

4 - Install the development software. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5 - Copy personality files to your computer . . . . . . . . . . . . . . . . . . . . . 8

6 - Connect MMDS or MMEVS to your computer and apply power . 9

Section 1. General Information

1.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.2 Development Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.2.1 Motorola Modular Development System (MMDS0508). . . . . . . . 11

1.2.2 Motorola Modular Evaluation System (MMEVS0508). . . . . . . . . 12

1.3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.4 EM Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.5 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.6 Target Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Section 2. Preparation and Operation

2.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.2 Configuring Board Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.3 Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.4 Remaining System Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

M68EML08EY Emulation Module - Version 1.0 User’s Manual

2 Table of Contents MOTOROLA

Table of Contents

Section 3. Support Information

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.2 Target Connectors J2 and J3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.3 Logic Analyzer Connectors J1 and J5 . . . . . . . . . . . . . . . . . . . . . . . . 24

3.4 Inverted Clock Connector J4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.5 Analog-to-Digital Converter Reference Voltage Connector E2. . . . . 26

3.6 Board Factory Test Connector J6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.7 Optional crystal circuit using Y1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.8 Clock oscillator Y2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.9 EM Board Socket Connectors P1 and P2 . . . . . . . . . . . . . . . . . . . . . . 27

User’s Manual M68EML08EY Emulation Module - Version 1.0

MOTOROLA List of Figures 3

User’s Manual —M68EML08EY Emulation Module

List of Figures

1-1 M68EML08EY Emulator Module. . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1-2 Target Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3-1 Target Connector (J2) Pin Assignments . . . . . . . . . . . . . . . . . . . . . . 21

3-2 Target Connector (J3) Pin Assignments . . . . . . . . . . . . . . . . . . . . . . 23

3-3 Logic Analyzer Connector J1 Pin Assignments . . . . . . . . . . . . . . . . 24

3-4 Logic Analyzer Connector J5 Pin Assignments . . . . . . . . . . . . . . . . 25

3-5 Connector J4 Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3-6 Connector E2 Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3-7 EM Connector P1 Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . 28

3-8 EM Connector P2 Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . 30

M68EML08EY Emulation Module - Version 1.0 User’s Manual

4 List of Figures MOTOROLA

List of Figures

User’s Manual M68EML08EY Emulation Module - Version 1.0

MOTOROLA List of Tables 5

User’s Manual —M68EML08EY Emulation Module

List of Tables

1-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1-2 EML08EY Target Cable and Head Assemblies . . . . . . . . . . . . . . . . 15

2-1 Configuration Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3-1 Target Connector (J2) Signal Descriptions . . . . . . . . . . . . . . . . . . . . 22

3-2 Target Connector (J3) Signal Descriptions . . . . . . . . . . . . . . . . . . . . 23

3-3 Logic Analyzer Connector J1 Signal Descriptions . . . . . . . . . . . . . . 24

3-4 Logic Analyzer Connector J5 Signal Descriptions . . . . . . . . . . . . . . 25

3-5 Connector J4 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3-6 Connector E2 Signal Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3-7 EM Connector P1 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . 29

3-8 EM Connector P2 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . 31

M68EML08EY Emulation Module - Version 1.0 User’s Manual

6 List of Tables MOTOROLA

List of Tables

User’s Manual M68EML08EY Emulation Module - Version 1.0

MOTOROLA M68EML08EY Quick Start Guide 7

User’s Manual —M68EML08EY Emulation Module

M68EML08EY Quick Start Guide

Make sure that power is disconnected from your M68EML08EY Emulator

Module and from your target system. Then follow these quick-start steps to

make your M68EML08EY ready for use as quickly as possible.

1 - Set jumpers W4 and W2

Jumper header W4 specifies the clock source for the MCU when you enable its

external clock.

•Place the jumper between pins 3 and 4 (factory default) to specify the

debugger-controlled oscillator from the platform board or place the

jumperbetweenpins1and2 tospecify4.9152-MHz oscillatorY2, which

can be replaced with an oscillator of a different value.

Jumperheader W2 specifies the voltagesupplied tothe emulationmoduleMCU

and to signals driven to the target.

•Place the jumper between pins 1 and 2 (factory default) to specify fixed

5.0 volts DC or place the jumper between pins 3 and 4 to specify fixed

3.0 volts DC.

2 - Install the emulation module into your development system

To use the M68EML08EY in an MMDS0508 Motorola Modular Development

System (MMDS) or MMEVS0508 Motorola Modular Evaluation System

(MMEVS):

•Remove the access panel of the MMDS station-module enclosure.

•Insert the M68EML08EY through the access-panel opening.

M68EML08EY Emulation Module - Version 1.0 User’s Manual

8 M68EML08EY Quick Start Guide MOTOROLA

M68EML08EY Quick Start Guide

•Fit together M68EML08EY connectors P1 and P2 (on the bottom of the

board) to connectors P11 and P12, respectively, of the MMDS or

MMEVS (P6 and P7 on some MMEVS boards) control board and snap

the corners of the M68EML08EY onto the plastic standoffs.

3 - Connect the emulation module to your target system

Use the supplied target flex cable, appropriate target head adapter, and surface

mount adapter. Plug the appropriate end of the flex cable plugs into

M68EML08EY connectors J2 and J3.

•If the M68EML08EY is in an MMDS station module, run the flex cable

through the slit in the station-module enclosure, then replace the access

panel.

•Plug the other end of the flex cable into the target head. Solder the

appropriate surface mount adapter to your target if necessary. Then plug

the target head into the surface mount adapter on your target system.

4 - Install the development software

5 - Copy personality files to your computer

The factory ships M68EML08EY MCU personality files on the documentation

CD-ROM.

•If you’re using the CodeWarrior IDE, find the installation directory and

copy the personality files named 00C31Vxx.mem and 00C32Vxx.mem

from the documentation CD-ROMto the ...\prog\reg subdirectory

of the CodeWarrior IDE main directory.

•If you’re using the P&E debugger, copy these files to the installation

directory that contains MMDS08.EXE or MMEVS08.EXE and rename

themfrom 00C31Vxx.mem and 00C32Vxx.mem to 00431Vxx.mem and

00432Vxx.mem respectively.

Indice

Altri manuali Motorola Hardware per computer

Motorola

Motorola DragonBall MC9328MX1 Manuale utente

Motorola

Motorola MC6805R Series Manuale del proprietario

Motorola

Motorola CPU32 Manuale utente

Motorola

Motorola PowerPC MPC750 Manuale utente

Motorola

Motorola PowerPC 603 Manuale utente

Motorola

Motorola PowerQUICC II MPC8280 Series Manuale utente

Motorola

Motorola M68ICS08AB Manuale utente

Motorola

Motorola M68MPB916X1 Manuale utente

Motorola

Motorola CME-12D60 Manuale utente

Motorola

Motorola MC68340 Manuale utente

Motorola

Motorola M68EM05A24 Manuale utente

Motorola

Motorola MC68030 Manuale utente

Motorola

Motorola 68000 Manuale utente

Motorola

Motorola MC68020 Manuale utente

Motorola

Motorola M68MPB16Z1 Manuale utente

Motorola

Motorola M68060 Manuale utente

Motorola

Motorola 68HC12 Manuale utente

Motorola

Motorola MPC8240 Manuale utente

Motorola

Motorola MC68302 Manuale utente

Motorola

Motorola SPX3BUM/D Manuale utente

Motorola

Motorola M6800 EXORciser Manuale utente

Motorola

Motorola ONCE SC140 Istruzioni per l'installazione e il funzionamento

Motorola

Motorola MVME5100 Series Manuale utente

Motorola

Motorola MVME712C Guida

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente