Motorola MBP89SN Manuale utente
USER’S GUIDE
Comfort Cloud
track you baby’s breathing and heart rate
The features described in this user’s guide are subject to modifications
without prior notice.
Model: MBP89SN
Welcome...
to your new Motorola MBP89SN Comfort
Cloud!
Thank you for purchasing your new Motorola MBP89SN, the
lounger with smart sleep monitor. You can pair your compatible
smart device to the Comfort Cloud and monitor your little one
while they dream.
Using Hubble’s innovative sleep tracking software, the Comfort
Cloud helps parents establish healthy sleep routines and
schedules, by tracking heart and breathing rates.
View live sleep status to know when your baby is asleep or
awake. Get alerted when breathing rate leaves present zones
for more than 20 seconds. Learn sleep patterns, track historical
trends and receive sleep reports. Ensure your baby is getting the
right amount of sleep, according to recommended standards.
Please keep your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to
provide a copy of your dated sales receipt to confirm warranty
status. Registration is not required for warranty coverage.
For product-related questions, please contact:
Live Chat: motorolastore.support/en
Email: support@motorolastore.com
On the Web: www.motorolastore.com/support
This User’s Guide has all the information you need to make the
most out of your product. Please read the Safety Instructions on
page 7 before you install the unit.
Inside the Box
•Baby Lounger
• Smart Sleep Sensor
•Washable Cover
• Micro USB/USB cable
• Quick Start Guide
Overview of the Smart Sleep Sensor
WARNING:
The product s ntended for your general knowledge only and
s not a substtute for professonal medcal advce or treatment
for specfc medcal condtons. You should not use ths product
to dagnose or treat a health problem or dsease wthout
consultng wth a qualfed healthcare provder. Please consult
your healthcare provder wth any questons or concerns you
may have regardng your condton.
Do not allow your nfant to lay face down on ths product. Do
not allow any part of ths product (or any fabrc) to cover your
nfant’s nose or mouth. Use wth proper adult supervson only.
To prevent strangulaton or entanglement, only use ncluded
cover wth baby lounger.
1. Buzzer
2. Charging Socket
3. LED indicator
4. Power Button
5. Sensor Body
6. Sensor Belt
4Table of contents
Table of contents
1. Important Safety Information ......................................................5
2. Setting up your Comfort Cloud ...................................................7
2.1 Charging the Smart Sleep Sensor......................................................7
2.2 Power On your Smart Sleep Sensor..................................................7
3. Installation of Smart Sleep Sensor..............................................8
4. Installation of Washable Cover ....................................................9
5. Minimum System Requirement ...................................................9
6. Connect Comfort Cloud to your Android™ Devices /
iPhone®/ iPad® ................................................................................10
7. Overview Of Hubble App ........................................................... 13
8. Disposal of the Device (environment)
........................................... 14
9. General Information...................................................................... 15
10. Troubleshooting ........................................................................... 20
11. Technical Specifications ..............................................................23
5
ENGLISH
Important Safety Information
1. Important Safety Information
To obtain optimal user experience, please read this manual carefully
prior to use.
• The product is intended for your general knowledge only and is
not a substitute for professional medical advice or treatment for
specific medical conditions.
• You should not use this product to diagnose or treat a health
problem or disease without consulting with a qualified healthcare
provider.
• Please consult your healthcare provider with any questions or
concerns you may have regarding your condition.
• Do not allow your infant to lay face down on this product.
•Do not allow any part of this product (or any fabric) to cover your
infant's nose or mouth.
• Use with proper adult supervision only.
• To prevent strangulation or entanglement, only use included
cover with baby lounger.
• The smart sleep strip shall only be used with the designated baby
lounger.
• Do not over bend, fold the product. The built-in sleep sensor may
be damaged.
• Keep the product away from high-temperature equipment (eg.
electrical blanket).
•Do not put the product into water, it will damage the sleep sensor
•The device must not be used close to any source of vibration (e.g.
Fans, pets etc.) as the vibrations could affect the judgement of
the device.
• If the device will not be intended for a long period of them,
power off and lay flat when store.
• Do not dispose of batteries by fire. When placed in a fire, the
battery is likely to explode.
6Important Safety Information
• Do not store the device under extreme temperature (below
-20°C/- 4°F or over 55°C/131°F) or extreme humidity conditions
(below 15% RH or over 90% RH). Failure to store device under
proper conditions may cause inaccurate readings.
•Do not use if the device is damaged. Continued use of a damaged
unit may cause injury, inaccurate results or serious hazard.
• Do not disassemble, repair or change any parts of the unit.
• All materials intended to contact with patients have passed the
ISO 10993-5 and ISO 10993-10 standards test, whereby they
are non-toxic and non-allergenic, and do not produce irritation
reactions. However, the state of current scientific knowledge and
technology being incomplete, other potential allergic reactions
may not yet be known. Should you have an allergic reaction to
the materials, please stop treatment immediately and consult
your physician.
• Store the product in a dry, clean place. Do not expose the
product to chemical solvents, lint, dust, direct sunshine or high
temperature.
• Do not maintain or service the device while it is in use.
• Should you experience any problems with this device (e.g. set-up,
maintenance or use), please contact Motorola customer service
or your local retailer.
• The sleep strip shall only be used with designated baby lounger.
• Should any unexpected operations or events occur, please report
them to the manufacturer.
• It is not recommended for the parent to sleep in bed next to the
lounger, as the sleep strip is very sensitive and will pick up the
heartbeat and breathing rate of the parent.
• Do not put any quilt or blanket or any other toppers on the
lounger to make sure the data accuracy.
•This sleep strip is recommended for infant in the age from 0 - 8
months old.
7
ENGLISH
Setting up your Comfort Cloud
2. Setting up your Comfort Cloud
2.1 Charging the Smart Sleep Sensor
• Recommended to charge at least 1 hour before initial use.
• When battery low power, the LED indicator flashes Red slowly
and buzzer Beeps alert for every 15 seconds till the device is
being charged.
2.2 Power On your Smart Sleep Sensor
• Power On - Press and hold the power button at the side of Smart
Sleep Sensor, LED indicator flashes Green for 3 seconds and goes
off.
• Power Off - Press and hold the power button at the side of Smart
Sleep Sensor, LED indicator flashes Red for 3 seconds and goes
off.
8Installation of Smart Sleep Sensor
3. Installation of Smart Sleep Sensor
Completely install Smart Sleep Sensor into the Baby Lounger side
pocket.
Note:
The Smart Sleep Sensor is built in with high sensitivity force sensor,
please insert it to the side pocket of Baby Lounger gently. Folding is
not permitted. Do not put the Smart Sleep Sensor into water.
9
ENGLISH
Installation of Washable Cover
4. Installation of Washable Cover
The Comfort Cloud comes with a removeable and washable cover,
install the Baby Lounger into cover before use and fix the cover
firmly with velcro at bottom of Baby Lounger.
5. Minimum System Requirement
Smartphones/Tablets Minimum System Requirements:
• iOS® 8.0 or above
• Android™ 4.3 or above
• Bluetooth 4.0 or above
For more information, please visit: https://hubbleconnected.com/
requirements.
10 Connect Comfort Cloud to your Android™ Devices / iPhone®/ iPad®
6. Connect Comfort Cloud to your
Android™ Devices / iPhone®/ iPad®
Download the “Hubble for Motorola Monitor” app
• Go to the Google Play™ Store to search for Hubble for Motorola
Monitor app.
• Download the Hubble for Motorola Monitor app (or scan the QR
code below) and install it on your Android™ device.
• Go to the App Store to search for Hubble for Motorola Monitor.
• Download the Hubble for Motorola Monitor app and install it on
your iPhone®/iPad®.
• Run the “Hubble for Motorola Monitor” app on your Android™
device/ iPhone®/iPad®
• Tap SIGNUP and follow the in-app instructions to create your
account. By signing up, you agree to our Terms & Conditions.
Note:
If you already have a Hubble App account, tap LOGIN, enter your
account information and proceed to the next steps.
Launch the set-up wizard and follow the steps to create a user
profile and add the Comfort Cloud.
Make sure that the Hubble app is active and that Bluetooth on your
mobile device is activated when pairing is in progress.
Altri manuali per MBP89SN
2
Indice
