Motrona TouchMATRIX AX350 Manuale utente

Operating Manual

motrona GmbH, Zeppelinstraße 16, DE - 78244 Gottmadingen, Tel. +49 (0) 7731 9332-0, Fax +49 (0) 7731 9332-30, [email protected], www.motrona.com

touchMATRIX® Indicator AX350

Process indicator with two 16 bit analog inputs, touch screen and graphic display

Product Features:

Operating modes for visualization of input 1, input 2 or combinations of inputs (1+2, 1-2, 1x2, 1:2)

Two universal 16 bit analog inputs for -10 … +10 V / 0 … 10 V / 0 … 20 mA / 4 … 20 mA

High accuracy reference output 10 V for potentiometers > 1 kOhm

Bright and high-contrast display with event-dependent color variations

Emulation of a 7-segment display inclusively icons and units

Intuitive and easy parameterization by plain text and touchscreen

24 V auxiliary output for encoder supply

Totalization for each input

Linearization with 24 control points for each input

Numerous features, e. g. tara, averaging filter, sampling time for each input

3.78 x 1.89 inch norm panel housing and IP65 protection

Available Options:

AX350: Basic unit with 2 analog inputs (16 Bit), 3 control inputs

Option AC: Power supply 115…230 VAC

Option AO: 16 bit analog output, 4 control outputs, serial RS232 interface

Option AR: 16 bit analog output, 4 control outputs, serial RS485 interface

Option CO: 4 control outputs, serial RS232 interface

Option CR: 4 control outputs, serial RS485 interface

Option RL: 2relay outputs

Option IO: IO-Link Device V1.1

Options can be combined

Ax350_04a_oi_e.doc / May-18 Seite 2 / 54

Version:

Description

AX350_01a_oi/cn/Jan-17

First Version

AX350_02a_oi/cn/Feb-17

Second Version

AX350_02b_oi/cn/March-17

minor changes and fixes

AX350_02c_oi/cn/Jul-17

minor changes and fixes

AX350_3a_oi/cn/Okt-17

Expansion of the scale units

AX350_4a_oi/sn/April-18

Extension with IO-link

Legal notices:

All contents included in this manual are protected by the terms of use and copyrights of motrona

GmbH. Any reproduction, modification, usage or publication in other electronic and printed media as

well as in the internet requires prior written authorization by motrona GmbH.

Ax350_04a_oi_e.doc / May-18 Seite 3 / 54

Table of Contents

1. Safety Instructions and Responsibility................................................................................ 4

1.1 General Safety Instructions..........................................................................................................4

1.2 Use according to the intended purpose.......................................................................................4

1.3 Installation....................................................................................................................................5

1.4 Cleaning, Maintenance and Service Notes .................................................................................5

2Introduction........................................................................................................................ 6

2.1 Operation mode............................................................................................................................6

2.2 Function diagram..........................................................................................................................7

3Electrical Connections........................................................................................................ 8

3.1 DC Power Supply..........................................................................................................................8

3.2 Auxiliary Voltage Output ..............................................................................................................8

3.3 Analog Input .................................................................................................................................9

3.4 Reference-output..........................................................................................................................9

3.5 Control Inputs .............................................................................................................................10

3.6 Analog Output (Option AO/AR) ..................................................................................................10

3.7 Serial interface (Option AO/AR/CO/CR) ....................................................................................11

3.8 Control-Output (Option AO/AR/CO/CR) .....................................................................................11

3.9 AC Power supply (Option AC).....................................................................................................12

3.10 Relay-Output (Option RL)............................................................................................................12

3.11 IO-Link (Option IO) ......................................................................................................................13

4Display and touch screen ..................................................................................................14

4.1 Screen structure for parametrization.........................................................................................14

4.2 Screen structure in operation.....................................................................................................15

5Parameter / Overview-Menu Structure..............................................................................16

5.1 General Menu.............................................................................................................................18

5.2 IN 1 Properties............................................................................................................................19

5.3 IN 1 Linearization .......................................................................................................................21

5.4 IN 1 Totalization .........................................................................................................................22

5.5 IN 2 Properties............................................................................................................................23

5.6 IN 2 Linearization .......................................................................................................................24

5.7 IN 2 Totalization .........................................................................................................................24

5.8 Linkage Properties......................................................................................................................25

5.9 IO-Link Properties .......................................................................................................................26

5.10 Preselection Values....................................................................................................................27

5.11 Preselection 1 Menu ..................................................................................................................27

5.12 Preselection 2 Menu ..................................................................................................................30

5.13 Preselection 3 Menu ..................................................................................................................31

5.14 Preselection 4 Menu ..................................................................................................................32

5.15 Serial Menu ................................................................................................................................33

5.16 Analog Out Menu .......................................................................................................................35

5.17 Command Menu .........................................................................................................................37

5.18 Display Menu..............................................................................................................................38

6. Appendix...........................................................................................................................41

6.1. Data readout via serial interface ...............................................................................................41

6.2 Display of scale units .................................................................................................................42

6.3 Parameter / serial codes ............................................................................................................43

6.4 Linearization ...............................................................................................................................50

6.5 Dimensions .................................................................................................................................52

6.6 Technical specifications.............................................................................................................53

Ax350_04a_oi_e.doc / May-18 Seite 4 / 54

1. Safety Instructions and Responsibility

1.1 General Safety Instructions

This operation manual is a significant component of the unit and includes important rules and hints

about the installation, function and usage. Non-observance can result in damage and/or impairment of

the functions to the unit or the machine or even in injury to persons using the equipment!

Please read the following instructions carefully before operating the device and observe all safety and

warning instructions! Keep the manual for later use.

A pertinent qualification of the respective staff is a fundamental requirement in order to use these

manual. The unit must be installed, connected and put into operation by a qualified electrician.

Liability exclusion: The manufacturer is not liable for personal injury and/or damage to property and for

consequential damage, due to incorrect handling, installation and operation. Further claims, due to

errors in the operation manual as well as misinterpretations are excluded from liability.

In addition the manufacturer reserves the right to modify the hardware, software or operation manual

at any time and without prior notice. Therefore, there might be minor differences between the unit and

the descriptions in operation manual.

The raiser respectively positioner is exclusively responsible for the safety of the system and equipment

where the unit will be integrated.

During installation or maintenance all general and also all country- and application-specific safety rules

and standards must be observed.

If the device is used in processes, where a failure or faulty operation could damage the system or

injure persons, appropriate precautions to avoid such consequences must be taken.

1.2 Use according to the intended purpose

The unit is intended exclusively for use in industrial machines, constructions and systems. Non-

conforming usage does not correspond to the provisions and lies within the sole responsibility of the

user. The manufacturer is not liable for damages which have arisen through unsuitable and improper

use.

Please note that device may only be installed in proper form and used in a technically perfect condition

(in accordance to the Technical Specifications). The device is not suitable for operation in explosion-

proof areas or areas which are excluded by the EN 61010-1 standard.

Ax350_04a_oi_e.doc / May-18 Seite 5 / 54

1.3 Installation

The device is only allowed to be installed and operated within the permissible temperature range.

Please ensure an adequate ventilation and avoid all direct contact between the device and hot or

aggressive gases and liquids.

Before installation or maintenance, the unit must be disconnected from all voltage-sources. Further it

must be ensured that no danger can arise by touching the disconnected voltage-sources.

Devices which are supplied by AC-voltages must be connected exclusively by switches, respectively

circuit-breakers with the low voltage network. The switch or circuit-breaker must be placed as near as

possible to the device and further indicated as separator.

Incoming as well as outgoing wires and wires for extra low voltages (ELV) must be separated from

dangerous electrical cables (SELV circuits) by using a double resp. increased isolation.

All selected wires and isolations must be conform to the provided voltage- and temperature-ranges.

Further all country- and application-specific standards, which are relevant for structure, form and

quality of the wires, must be ensured. Indications about the permissible wire cross-sections for wiring

are described in the Technical Specifications.

Before first start-up it must be ensured that all connections and wires are firmly seated and secured in

the screw terminals. All (inclusively unused) terminals must be fastened by turning the relevant screws

clockwise up to the stop.

Overvoltages at the connections must be limited to values in accordance to the overvoltage category II.

For placement, wiring, environmental conditions as well as shielding and earthing/grounding of the

supply lines the general standards of industrial automation industry and the specific shielding

instructions of the manufacturer are valid. Please find all respective hints and rules on

www.motrona.com/download.html --> “[General EMC Rules for Wiring, Screening and Earthing]”.

1.4 Cleaning, Maintenance and Service Notes

To clean the front of the unit please use only a slightly damp (not wet!), soft cloth. For the rear no

cleaning is necessary. For an unscheduled, individual cleaning of the rear the maintenance staff or

assembler is self-responsible.

During normal operation no maintenance is necessary. In case of unexpected problems, failures or

malfunctions the device must be shipped for back to the manufacturer for checking, adjustment and

reparation (if necessary). Unauthorized opening and repairing can have negative effects or failures to

the protection-measures of the unit.

Ax350_04a_oi_e.doc / May-18 Seite 6 / 54

2Introduction

This series of display unit is suitable for analog signals (-10 … 10V or 0/4 … 20 mA). It is very

versatile in use, due to the intuitive handling and the extensive range of functions and options.

2.1 Operation mode

All functions are can be configured in the parameter menu.

The device can be set to one of the following operation modes:

SINGLE:

single-channel operation of input 1

DUAL:

two-channel operation of input 1 and 2

IN 1 + IN 2:

two-channel operation of input 1 and 2 in combination with sum

IN1 –IN 2:

two-channel operation of input 1 and 2 in combination with difference.

IN 1 x IN 2:

two-channel operation of input 1 and 2 in combination with multiplication

IN 1 / IN 2:

two-channel operation of input 1 and 2 in combination with division .

Ax350_04a_oi_e.doc / May-18 Seite 7 / 54

2.2 Function diagram

Ax350_04a_oi_e.doc / May-18 Seite 8 / 54

3 Electrical Connections

The terminal screws should be tightened with a slotted screwdriver (blade width 2mm).

3.1 DC Power Supply

The unit accepts DC supply from 18 to 30 V at the terminals 1 and 2. The power consumption depends

on the level of the supply voltage with aprox. 100 mA and the additional current required at the

auxiliary voltage output.

All GND terminals are internally interconnected.

3.2 Auxiliary Voltage Output

Terminal 3 and 4 provide an auxiliary output for supply of sensors and encoders.

The output voltage depends on the power supply.

DC version

AC version

The encoder voltage is approx. 1 V lower than

the power supply voltage at terminal 1 and 2

and should be loaded with max. 250 mA.

The encoder voltage is 24 VDC (± 15%) and

should be loaded with max. 150 mA up to 45

degrees Celsius. At higher temperature the

maximum output current is reduced to 80 mA.

Ax350_04a_oi_e.doc / May-18 Seite 9 / 54

3.3 Analog Input

The reference potential (AGND) for the analog inputs is connected at terminal 5.

The unit provides two 16 bit analog inputs at terminal 6 and 7. The characteristics of the analog inputs

(voltage input or current input ) can be set in the Menu IN 1/IN 2 PROPERTIES.

Important:

Before connecting the sensor the configuration (voltage or current input) must be set!

Wiring of the intrecmental inputs:

Voltage input

Current input

3.4 Reference-output

The unit provides a 10 V reference-output at terminal 8. This output should be loaded with 10 mA

maximum. This reference-output can be used for connecting a potentiometer.

Referenz output with potentiometer:

Ax350_04a_oi_e.doc / May-18 Seite 10 / 54

3.5 Control Inputs

The three control inputs at terminal 10, 11 and 12 have HTL PNP characteristics.

In the COMMAND MENU the programmable functions for the control inputs can be assigned. Available

functions are: reset the display value, display switching, locking the touch screen or release the lock

function of the control or relay outputs.

Wiring of the control inputs:

Unconnected control inputs are always “LOW”.

All inputs are designed to receive impulses from an electronic impulse source.

Notice for mechanical switching contacts:

When exceptionally mechanical contacts are used, please connect an external capacitor between GND

(-) and the corresponding input (+). A capacity of 10 µF will reduce the input frequency to

20 Hz and miscounting due to contact bouncing will be eliminated.

3.6 Analog Output (Option AO/AR)

A 16 bit analog output is available at terminal 13 and 14 / 15.

This output can be configured and scaled in the ANALOG MENU.

The following configuration is possible:

•Voltage output: -10 … +10 V

•Current output: 0 … 20 mA

•Current output: 4 … 20 mA

The analog output is proportional to the the reference source and is referenced to potential AGND.

AGND and GND are internally interconnected.

Important:

A parallel operation with voltage and current output at the analog output is not allowed.

Indice

Altri manuali Motrona Pannello touch

Motrona

Motrona BT700 Manuale utente

Motrona

Motrona CA340 Manuale utente

Motrona

Motrona IX 342 Manuale utente

Motrona

Motrona touchMATRIX IX350 Manuale utente

Motrona

Motrona PB340 Manuale utente

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente

Motrona touchMATRIX AX350 Manuale utente

Manuali Pannello touch popolari di altre marche