MPP Solar PIP-HS Manuale utente

Version: 1.2

User Manual

REMOTE PANEL MANUAL FOR

PIP-HS/MS/MSX INVERTER-CHARGER SERIES

Product Overview

Unpacking and Inspection

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should

have received the following items inside of package:

Remote panel x 1

User manual x 1

RJ45 communication cable x 1

RJ11 cable x 1

RJ45 communication board x 1

RS232/RJ45 cable x 1

Installation

Step 1: Drill two holes in the marked locations with two screws. Place the box on the surface and align the

mounting holes with the two screws. Then, check if the remote panel is firmly secured.

Note: Installation to the wall should be implemented

with the proper screws. Refer chart for recommended

spec of screws.

Step 2: Please check communication port in inverter first. If it is equipped with USB communication port,

please replace USB communication board with bundled RJ 45 communication board by following below steps.

If it’s already with RJ45 communication port, please skip this step.

Ø 5-Ø 9

60.00 mm

Communication port and power input: Power input of remote

panel.

Signal input: Signal input to remote panel.

Communication port: Connection to PC.

Power switch: Main switch of remote panel.

External power input: It’s necessary to have external +5VDC

power source when using inverter without dry contact.

On/Off switch for external power input.

Interface: Remote panel display, operation buttons and

indicators.

USB communication board RJ45 communication board

Step 1: Remove terminal cover.

Step 2: Remove USB

communication board.

Step 3: Put bundled RJ45

communication board in same place.

Step 3: Before wiring connection, please modify jumper setting of JP1 and JP2 in communication board as

below.

1KVA-3KVA inverter

1 3

JP1 1 3

JP1

1 3

JP2

1 3

JP2

Default communication board setting in inverter Modify setting in communication board

when using remote panel

4KVA-5KVA inverter

Default communication board setting in inverter Modify setting in communication board

when using remote panel

Step 4: If the inverter is not bundled with dry contact, please follow below diagram 1 for wiring connection. If

the inverter is bundled with dry contact, please follow below diagram 2 for wiring connection.

Use a RJ45 to RS232 cable bundled with inverter to connect communication port to PC. If the inverter is not

bundled with dry contact, it’s necessary to use an external +5V USB adapter to provide power for remote

panel.

Step 5: Connect remote panel to inverter with a 6-m RJ45 communication cable and a 6-m RJ11 cable (only

available for the inverter with dry contact, connect NC and NO port of dry contact) as below diagrams.

Diagram 1: Wiring diagram for inverter without dry contact

Diagram 2: Wiring diagram for inverter with dry contact

Operation

After main switch() and external power input switch(,only available for inverter without dry contact) are

powered on, users can monitor and control the inverter from a distance with the remote panel. Besides, users

also can monitor and control the inverter with PC software via communication port.

The AC output of the inverter can be powered on/off by remote panel. For the interface operation, please refer

to the inverter manual.

Altri manuali per PIP-HS

Questo manuale è adatto per i seguenti modelli

Altri manuali MPP Solar Invertitore

MPP Solar

MPP Solar LV2424 Manuale utente

MPP Solar

MPP Solar HV V2 6048-T Manuale utente

MPP Solar

MPP Solar 3KW Manuale utente

MPP Solar

MPP Solar PIP3624MAX Manuale utente

MPP Solar

MPP Solar LVX 6048 Manuale utente

MPP Solar

MPP Solar HYBRID LV 6048 Manuale utente

MPP Solar

MPP Solar PIP5048MKX Manuale utente

MPP Solar

MPP Solar 3k hybrid Manuale utente

MPP Solar

MPP Solar PIP3024GEW Manuale utente

MPP Solar

MPP Solar PIP3624MT Manuale utente

MPP Solar

MPP Solar U5648MS Manuale utente

MPP Solar

MPP Solar PIP 1624 Manuale utente

MPP Solar

MPP Solar PIP-MS 1-5KVA Manuale utente

MPP Solar

MPP Solar LV5048 Manuale utente

MPP Solar

MPP Solar 1KVA-5KVA Manuale utente

MPP Solar

MPP Solar PIP-1212MS Manuale utente

MPP Solar

MPP Solar PIP 6048MGX-T Manuale utente

MPP Solar

MPP Solar RS485 Manuale utente

MPP Solar

MPP Solar LV 6548 Manuale utente

MPP Solar

MPP Solar Grid PV-Inverter 10Kw Manuale utente

MPP Solar

MPP Solar PIP-HS Manuale utente

MPP Solar

MPP Solar 6000 Grid PV Manuale utente

MPP Solar

MPP Solar LV 3KVA-24V Manuale utente

MPP Solar

MPP Solar MPI 12KW WP Manuale utente

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente