MR TAPCON 250 Manuale del proprietario
Voltage Controller
TAPCON® 250
Supplement
2060168/02 EN . Adapter Panel TC250-67_04
© All rights reserved by Maschinenfabrik Reinhausen
Dissemination and reproduction of this document and use and disclosure of its content are strictly prohibited
unless expressly permitted.
Infringements will result in liability for compensation. All rights reserved in the event of the granting of patents,
utility models or designs.
The product may have been altered since this document was published.
We reserve the right to change the technical data, design and scope of supply.
Generally the information provided and agreements made when processing the individual quotations and orders
are binding.
The original operating instructions were written in German.
Table of contents
Maschinenfabrik Reinhausen 2014 32060168/02 EN TAPCON® 250
Table of contents
1Introduction ......................................................................................................................... 4
1.1 Manufacturer ....................................................................................................................................... 4
1.2 Subject to change without notice......................................................................................................... 4
1.3 Completeness...................................................................................................................................... 4
1.4 Supporting documents......................................................................................................................... 4
1.5 Safekeeping......................................................................................................................................... 5
2Safety ................................................................................................................................... 6
2.1 General safety information .................................................................................................................. 6
2.2 Appropriate use ................................................................................................................................... 6
2.3 Inappropriate use................................................................................................................................. 6
2.4 Personnel qualification ........................................................................................................................ 7
2.5 Operator's duty of care ........................................................................................................................ 7
3Product description ............................................................................................................ 8
4Mounting .............................................................................................................................. 9
4.1 Installing the adapter panel ................................................................................................................. 9
4.2 Cable recommendation ....................................................................................................................... 9
4.3 Electromagnetic compatibility ............................................................................................................ 10
4.4 Connecting the adapter panel ........................................................................................................... 10
5Technical data ................................................................................................................... 16
1 Introduction
Maschinenfabrik Reinhausen 20144 2060168/02 ENTAPCON® 250
Introduction
This technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning and monitoring of the product.
It also includes safety instructions and general information about the prod-
uct.
This technical file is intended solely for specially trained and authorized per-
sonnel.
Manufacturer
The product is manufactured by:
Reinhausen Manufacturing Inc.
2549 North 9th Avenue
Humboldt, Tennessee 38343, USA
Tel.: (+1) 731/784-7681
Fax: (+1) 731/784-7682
E-mail: [email protected]
Further information on the product and copies of this technical file are avail-
able from the address listed above or at www.tapcon250.com.
Subject to change without notice
The information contained in this technical file comprises the technical speci-
fications approved at the time of printing. Significant modifications will be in-
cluded in a new edition of the technical file.
The document number and version number of this technical file are shown in
the footer.
Completeness
This technical file is incomplete without the supporting documentation.
Supporting documents
The following documents apply to this product:
▪ Operating instructions
▪ Connection diagrams
Also observe generally valid legislation, standards, guidelines and specifica-
tions on accident prevention and environmental protection in the respective
country of use.
1
1.1
1.2
1.3
1.4
1 Introduction
Maschinenfabrik Reinhausen 2014 52060168/02 EN TAPCON® 250
Safekeeping
This technical file and all supporting documents must be kept ready at hand
and accessible for future use at all times.
1.5
2 Safety
Maschinenfabrik Reinhausen 20146 2060168/02 ENTAPCON® 250
Safety
General safety information
The technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning and monitoring of the product.
▪ Read this technical file through carefully to familiarize yourself with the
product.
▪ Particular attention should be paid to the information given in this chap-
ter.
Appropriate use
The product and associated equipment and special tools supplied with it
comply with the relevant legislation, regulations and standards, particularly
health and safety requirements, applicable at the time of delivery.
If used as intended and in compliance with the specified requirements and
conditions in this technical file as well as the warning notices in this technical
file and attached to the product, then the product does not present any haz-
ards to people, property or the environment. This applies throughout the
product's entire life, from delivery through installation and operation to disas-
sembly and disposal.
The operational quality assurance system ensures a consistently high quality
standard, particularly in regard to the observance of health and safety re-
quirements.
The following is considered appropriate use
▪ The product must be operated in accordance with this technical file and
the agreed delivery conditions and technical data
▪ The equipment and special tools supplied must be used solely for the in-
tended purpose and in accordance with the specifications of this techni-
cal file
Inappropriate use
Use is considered to be inappropriate if the product is used other than as de-
scribed in the Appropriate use section. Please also note the following:
▪ Risk of explosion and fire from highly flammable or explosive gases, va-
pors, or dusts. Do not operate product in areas at risk of explosion.
▪ Unauthorized or inappropriate changes to the product may lead to per-
sonal injury, material damage, and operational faults. Only modify prod-
uct following discussion with Maschinenfabrik Reinhausen GmbH.
2
2.1
2.2
2.3
2 Safety
Maschinenfabrik Reinhausen 2014 72060168/02 EN TAPCON® 250
Personnel qualification
The product is designed solely for use in electrical energy systems and facili-
ties operated by appropriately trained staff. This staff comprises people who
are familiar with the installation, assembly, commissioning and operation of
such products.
Operator's duty of care
To prevent accidents, disruptions and damage as well as unacceptable ad-
verse effects on the environment, those responsible for transport, installa-
tion, operation, maintenance and disposal of the product or parts of the prod-
uct must ensure the following:
▪ All warning and hazard notices are complied with.
▪ Personnel are instructed regularly in all relevant aspects of operational
safety, the operating instructions and particularly the safety instructions
contained therein.
▪ Regulations and operating instructions for safe working as well as the
relevant instructions for staff procedures in the case of accidents and
fires are kept on hand at all times and are displayed in the workplace
where applicable.
▪ The product is only used when in a sound operational condition and
safety equipment in particular is checked regularly for operational relia-
bility.
▪ Only replacement parts, lubricants and auxiliary materials which are au-
thorized by the manufacturer are used.
▪ The specified operating conditions and requirements of the installation
location are complied with.
▪ All necessary devices and personal protective equipment for the specific
activity are made available.
▪ The prescribed maintenance intervals and the relevant regulations are
complied with.
▪ Installation, electrical connection and commissioning of the product may
only be carried out by qualified and trained personnel in accordance
with this technical file.
▪ The operator must ensure appropriate use of the product.
2.4
2.5
3 Product description
Maschinenfabrik Reinhausen 20148 2060168/02 ENTAPCON® 250
Product description
The TC250-67 adapter panel allows installation of the TAPCON® 250 in a
cutout with dimensions of 5-7/8" x 15-1/8" (162 x 419 mm). This makes it
possible to use a TAPCON® 250 to replace existing voltage regulators of the
following types:
▪ Westinghouse SVC
▪ Westinghouse SVR
▪ Beckwith M-0067E
▪ Beckwith M-2067B
All required connections are present on the back of the adapter panel in the
form of a terminal block. The adapter panel contains a replaceable fuse. A
spare fuse can be found in the fuse holder.
WARNING Fire hazard
Risk of fatal injury and damage to the device and system peripherals due to
the use of incorrect fuses.
► Only use fuses of the following type: Article number 312.300, manufac-
tured by LITTLEFUSE, 250 V AC/0.3 A.
3
4 Mounting
Maschinenfabrik Reinhausen 2014 92060168/02 EN TAPCON® 250
Mounting
This chapter describes how to correctly mount and connect the device. Note
the connection diagrams provided.
WARNING Electric shock
Risk of fatal injury due to electrical voltage.
► De-energize the device and system peripherals and lock them to pre-
vent them from being switched back on.
► Do so by short-circuiting the current transformer; do not idle the current
transformer.
NOTICE
Electrostatic discharge
Damage to the device due to electrostatic discharge.
► Take precautionary measures to prevent the build-up of electrostatic
charges on work surfaces and personnel.
Installing the adapter panel
Proceed as follows to assemble the TAPCON® 250 voltage regulator with
the TC250-67 adapter panel:
1. Fasten the voltage regulator on the rear side of the adapter panel using
the 4 screws provided.
2. Insert both plug terminals into connection P2 on the bottom of the volt-
age regulator.
3. Install the adapter panel with voltage regulator into a control cabinet or
appropriate mounting point.
ðThe adapter panel has been installed.
Cable recommendation
Please note the following recommendation from Maschinenfabrik Reinhau-
sen when wiring the device.
Excessive line capacitance can prevent the relay contacts from breaking the
contact current. In control circuits operated with alternating current, take into
account the effect of the line capacitance of long control lines on the func-
tion of the relay contacts.
Conductor cross-section 16...22 AWG (0.33...1.3 mm²)
Fastening Cable shoe (e.g. TYCO/AMP 36150)
Max. permissible torque 9.0 lb·in (1.1 Nm)
Table 1: Cable recommendation
4
4.1
4.2
4 Mounting
Maschinenfabrik Reinhausen 201410 2060168/02 ENTAPCON® 250
Electromagnetic compatibility
The device has been developed in accordance with applicable EMC stan-
dards. The following points must be noted in order to maintain the EMC
standards.
▪ Ground the TAPCON® 250 using the grounding screw on the housing.
▪ Route signal lines in a shielded cable.
▪ Follow the notes in the associated operating instructions regarding the
connection of the TAPCON® 250.
Connecting the adapter panel
WARNING Electric shock
Risk of fatal injury due to connection mistakes
► Ground the device using the grounding screw on the housing.
► Pay attention to the phase difference of the secondary terminals for the
current transformer and voltage transformer.
► Connect the output relays correctly to the motor-drive unit.
4.3
4.4
Altri manuali per TAPCON 250
2
Indice
Altri manuali MR Controllori
MR
MR TAPCON 250 Manuale utente
MR
MR tapcon 230 pro Manuale utente
MR
MR TAPCON 260 Manuale utente
MR
MR TAPCON 230 basic Manuale utente
MR
MR TAPCON 230 Manuale utente
MR
MR TAPCON 260 Manuale utente
MR
MR TAPCON 230 Expert Manuale utente
MR
MR TAPCON 250 Manuale utente
MR
MR TAPCON 230 VC Manuale utente
MR
MR TAPCON Manuale utente
MR
MR TAPCON 230 basic Manuale utente
MR
MR ECOTAP VPD CONTROL PRO Manuale utente
MR
MR TAPCON Manuale utente
MR
MR tapcon 230 pro Manuale utente
MR
MR TAPCON 230 AVT Manuale del proprietario
MR
MR TAPCON 230 Manuale utente
MR
MR tapcon 240 Manuale utente
MR
MR tapcon 240 Manuale utente
MR
MR VACUTAP VM Series Manuale utente
