MSI MS-98E2 Manuale utente

MS-98E2

(v1.x) Industrial Computer Board

Preface MS-98E2

The material in this document is the intellectual property of MICRO-STAR

INTERNATIONAL. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

Revision History

Revision Date

V1.0 2017/03

Technical Support

If a problem arises with your system and no solution can be obtained from

the user’s manual, please contact your place of purchase or local distributor.

Alternatively, please visit the MSI website for technical guide, BIOS updates,

driver updates and other information, or contact our technical sta󰘯 via http://www.

msi.com/support/

iii

Preface MS-98E2

Safety Instructions

￭Always read the safety instructions carefully.

￭Keep this User’s Manual for future reference.

￭Keep this equipment away from humidity.

￭Lay this equipment on a reliable at surface before setting it up.

￭The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

￭Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

￭Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

￭Always Unplug the Power Cord before inserting any add-on card or mod-

ule.

￭All cautions and warnings on the equipment should be noted.

￭Never pour any liquid into the opening that could damage or cause electrical

shock.

￭If any of the following situations arises, get the equipment checked by ser-

vice personnel:

◯The power cord or plug is damaged.

◯Liquid has penetrated into the equipment.

◯The equipment has been exposed to moisture.

◯The equipment does not work well or you can not get it work according

to User’s Manual.

◯The equipment has dropped and damaged.

◯The equipment has obvious sign of breakage.

￭DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM-

AGE THE EQUIPMENT.

Preface MS-98E2

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be

disposed of as unsorted household waste. Please use the

public collection system to return, recycle, or treat them in

compliance with the local regulations.

廢電池請回收

Taiwan:

For better environmental protection, waste batteries should

be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material

and requires special handling when recycled or disposed

of in California.

For further information please visit:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer.

Preface MS-98E2

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device

is in compliance with the essential safety requirements and other

relevant provisions set out in the European Directive.

FCC-B Radio Frequency

Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o󰘯 and on, the user is encouraged

to try to correct the interference by one or more of the measures listed below:

￭Reorient or relocate the receiving antenna.

￭Increase the separation between the equipment and receiver.

￭Connect the equipment into an outlet on a circuit di󰘯erent from that to

which the receiver is connected.

￭Consult the dealer or an experienced radio/television technician for

help.

Notice 1

The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that

may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes e󰘯ect on

August 13, 2005, products of “electrical and electronic equipment”

cannot be discarded as municipal waste anymore and manufacturers of covered

electronic equipment will be obligated to take back such products at the end of

their useful life.

Preface MS-98E2

CONTENTS

Trademarks ................................................................................................... ii

Revision History ............................................................................................ ii

Technical Support.......................................................................................... ii

Safety Instructions.........................................................................................iii

Chemical Substances Information ............................................................... iv

Battery Information....................................................................................... iv

CE Conformity............................................................................................... v

FCC-B Radio Frequency Interference Statement ......................................... v

WEEE Statement .......................................................................................... v

1 Overview.......................................................................................1-1

Motherboard Specications........................................................................1-2

Motherboard Layout...................................................................................1-5

2 Hardware Setup ...........................................................................2-1

CPU (Central Processing Unit) ..................................................................2-4

Memory ......................................................................................................2-6

Power Supply.............................................................................................2-7

Rear Panel I/O ...........................................................................................2-8

Connector................................................................................................. 2-11

Jumper .....................................................................................................2-18

Slot...........................................................................................................2-20

3 BIOS Setup...................................................................................3-1

Entering Setup ...........................................................................................3-2

The Menu Bar ............................................................................................3-4

Main ...........................................................................................................3-5

Advanced ...................................................................................................3-7

Boot..........................................................................................................3-12

Security ....................................................................................................3-13

Chipset.....................................................................................................3-19

Power .......................................................................................................3-21

Save & Exit...............................................................................................3-22

Appendix WDT & GPIO ................................................................... A-1

WDT Sample Code ................................................................................... A-2

GPIO Sample Code .................................................................................. A-3

1-1-1

Thank you for choosing the MS-98E2, an excellent industrial computer

board.

Based on the innovative Intel® C236 / H110 chipset for optimal system

e󰀩ciency, the MS-98E2 accommodates the Intel® Desktop Kaby Lake-S/

Skylake-S processor and supports up to 4 / 2 DDR4 2133MHz / 2400MHz

(7th Gen) U-DIMM slots to provide the maximum of 64 / 32GB memory

capacity.

Designed to withstand harsh industrial conditions, the MS-98E2 is

engineered to provide reliable performance for a wide variety of industrial

applications.

1Overview

1-2

Overview MS-98E2

Motherboard Specications

Processor

■7th/6th Gen Intel® Desktop Kaby Lake-S/Skylake-S Core™ i7/i5/i3/Penti-

um®/Celeron® Series Processor, Max 95W

Chipset

■SKU1: Intel®C236

■SKU2: Intel®H110

Memory

■Dual channel DDR4, up to 2133MHz / 2400MHz (7th Gen)

■SKU1: 4 x U-DIMM slots, up to 64GB, ECC

■SKU2: 2 x U-DIMM slots, up to 32GB, Non ECC

Network

■1 x Intel® I210-AT GbE LAN (Co-lay I211-AT)

■1 x Intel® I219-LM GbE LAN PHY

Storage

■SKU1:C236

-6 x SATA 6Gb/s (RAID 0, 1, 5, 10)

-1 x mSATA

-1 x M.2

■SKU2:H110

-3 x SATA 6Gb/s

-1 x mSATA

Expansion Slot

■SKU1:C236

-1 x PCIe x16 slot

-1 x PCIe x1 slot

-1 x PCIe x8 slot (signal x4)

-1 x PCI slot

-1 x M.2 slot (M Key, PCIe x4, SATA 6Gb/s)

-1 x full-size Mini-PCIe slot (Support PCIe, SATA 6Gb/s, USB2.0)

■SKU2:H110

-1 x PCIe x16 slot

-1 x PCIe x1 slot

-1 x PCIe x8 slot (signal x1)

-1 x PCI slot

-1 x full-size Mini-PCIe slot (SATA 6Gb/s)

1-3

Overview MS-98E2

Internal I/O

■1 x 8-pin power connector

■1 x 24-pin power connector

■3 x System fan connectors

■1 x CPU fan connector

■2 x USB2.0 connectors (4 ports)

■1 x USB3.0 port (2 ports) (SKU1:C236)

■5 x RS-232 COM port connectors (0V/5V/12V)(COM2~COM6)

■1 x RS-232 COM port header (COM7~COM10) (SKU1:C236)

■5 x COM port jumpers

■1 x GPIO header

■1 x Front panel header

■1 x S/PDIF connector

■1 x Amplier header

■1 x TPM header

■1 x LVDS connector (SKU1:C236)

■1 x LVDS inverter connector (SKU1:C236)

■1 x LVDS power jumpers (SKU1:C236)

■1 x PCI power jumper

■1 x Front audio header

■1 x Chassis intrusion header

■1 x Clear CMOS jumper

■1 x AT/ATX select jumper

■1 x ME jumper

■1 x LAN congure jumper

■1 x SMBus connector

■1 x Buzzer header

Rear I/O

■1 x PS/2 mouse/keyboard combo port

■2 x USB2.0 ports

■1 x RS-232/422/485 serial port (0V/5V/12V)

■1 x DisplayPort

■1 x VGA port

■1 x DVI-D port

■2 x RJ45 GbE LAN ports

■4 x USB3.0 ports

■3 x Audio jacks (Line-In, Line-Out, Mic-In)

1-4

Overview MS-98E2

Graphics

■Integrated Intel® HD Graphics

-1 x VGA (Max resolution 1920 x 1200)

-1 x DVI-D (Max resolution 1920 x 1200)

-1 x DisplayPort (Max resolution 3840 x 2160)

-1 x LVDS (18/24 bit, Dual Channel)(SKU1:C236)

■SKU1 C236: Up to 3 independent displays (VGA+DVI-D+DP, VGA+D-

VI-D+LVDS, DVI-D+DP+LVDS)

■SKU2 H110: Up to 2 independent displays (VGA+DVI-D, VGA+DP, DVI-

D+DP)

Audio

■Realtek® ALC887/888S HD Audio Codec

■1 x Amplier header

■1 x Front audio header

■1 x S/PDIF connector

■3 x Audio jacks (Line-In, Line-Out, Mic-In)

Environment

■Operating Temperature: -10 ~ 60oC

■Storage Temperature: -20 ~ 80oC

■Humidity: 5 ~ 95% RH, non-condensing

Form Factor

■Micro-ATX: 244mmx244mm

Certication

■CE, FCC, BSMI, VCCI, RCM

SKU Comparison

SKUs

Features SKU1:C236 SKU2:H110

PCH C236 H110

Memory DDR4, support ECC DDR4, non-ECC

SATA 6 x SATA 6Gb/s 3 x SATA 6Gb/s

M.2 Yes No

Indice

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente