MSI GT60 Istruzioni per l'installazione
GT60（MS-16F3）Disassembly Guide
■1、BATTERY PACK
■2、BOTTOM DOOR ASSY
■ 3、HDD MODULE
■ 4、THERMAL-KIT、CPU AND DRAM
■ 5、ODD MODULE
■6、SEPARATE UPPER CASE AND LOWER CASE
■7、LOWER CASE ASSY
■8、UPPER CASE ASSY
■ 9、LCD MODULE ASSY
GT60（MS-16F3）Disassembly Guide
1、BATTERY PACK
1.1：Move the “Unlock’ button base on left picture
shows.
1.2：Release the “Release” button and move the
battery pack base on left picture.
Component P/N Qty
Battery Pack S9N-3496200-M47 1
GT60（MS-16F3）Disassembly Guide
2、BOTTOM DOOR ASSY
2.1：Remove the 5 screws (M2.5*5mm).
Attention: the screw driver touque is: 2.5-3.0 gf-cm
Component P/N Qty
Screw E43-1205003-H29 2
2.2：Remove the 6 screws (M2.5*5mm). Then
remove the Bottom door.
Attention: the screw driver touque is: 2.5-3.0 gf-cm
Component P/N Qty
Bottom door 307-6F1J215-P89 1
Screw E43-1205003-H29 6
GT60（MS-16F3）Disassembly Guide
3、HDD MODULE
3.1: Remove the 2 screws (M2.5*5mm); then
remove the two HDD Module according to the
direction as pic shows.
Attention: the screw driver torque is 2.5-3.0Kgf-cm
Component P/N Qty
Screw E43-1255001-H29 2
3.2: Remove the 4 screws (M3*4mm) that stabilize
the two HDD bracket, then remove the HDD
bracket.
Attention: the screw driver torque is 2.5-3.0Kgf-cm
Component P/N Qty
Screw E43-1304009-G68 4
HDD Bracket 307-6F10112-C22 2
HDD Module S71-2475704-H05 2
GT60（MS-16F3）Disassembly Guide
4、THERMAL-KIT、CPU AND DRAM
4.1: Remove the 1 screw(M2.5*5mm) and FAN
cable, after that remove the Fan.
Attention：the screw driver torque is 2.5-3.0Kgf-cm
Component P/N Qty
Screw E43-1255001-H29 1
FAN E33-0800182-MC2 1
4.2: Remove the 3 screws (M2.5*5mm) and 4
spring screws, after that remove the two Heatsink.
Attention：the screw driver torque is 2.5-3.0Kgf-cm
Component P/N Qty
Screw E43-1255001-H29 3
Heatsink E31-0403231-TA9 1
Heatsink E31-0900332-TA9 1
4.3：Open the CPU Slot with Screw Driver, then
remove CPU Module as below.
Component P/N Qty
CPU G51-N1CPX2V-I06 1
4
7
2
1
5
6
3
GT60（MS-16F3）Disassembly Guide
4、THERMAL-KIT、CPU AND DRAM
4.4 Push the two side shielding of RAM as pic
shows; Then remove the RAM module according
the direction as pic shows.
Component P/N Qty
RAM Module S7C-S469H03-E54 2
4.5：Remove 1 screw (M2.5*5mm); then remove
the VGA card as pic shows.
Attention: the screw driver torque is: 2.5-3.0Kgf-cm
Component P/N Qty
VGACard 607-1W071-05S 1
Screw E43-1255001-H29 1
4.6：Remove 2screws (M2*3mm); then remove the
HDD connector.
Attention: the screw driver torque is: 1.5-2.0Kgf-cm
Component P/N Qty
HDD connector 607-16F3A-01S 1
Screw E43-1203003-H29 2
GT60（MS-16F3）Disassembly Guide
5、ODD MODULE
5.1：Remove the ODD Module according to the
direction as pic shows.
5.2：Remove ODD Bezel as below.
Component P/N Qty
ODD Bezel 307-6F1F213-P89 1
5.3：Remove 2pcs (M2*3mm) Screws; Then remove
ODD Bracket as below.
Attention：the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Screw E43-1203003-H29 2
ODD Bracket E2M-6F10512-C22 1
ODD Module S7D-2270038-T87 1
GT60（MS-16F3）Disassembly Guide
6、SEPARATE UPPER CASE AND LOWER CASE
6.1：Before remove K/B, firstly remove the Hinge
Cover. Care the Sensor board FPC below the
cover.
6.2：Remove the Sensor board.
Component P/N Qty
Sensor board 607-16F32-01S 1
Hinge Cover 307-6F3E211-Y31 1
6.3：Remove the LVDS and camera cable as pic
shows.
GT60（MS-16F3）Disassembly Guide
6、SEPARATE UPPER CASE AND LOWER CASE
6.4：Remove 1 screw (M2*3mm); then remove the
two side wireless card antenna as pic shows.
Attention: the screw driver torque is: 1.5-2.0Kgf-cm
Component P/N Qty
WLAN Module G51-N1WL069-X06 1
Screw E43-1203003-H29 1
6.5 ：Remove the 2 screws (M2.5*7mm) that
stabilize the left LCD hinge.
Attention: the screw driver torque is 3.0-3.5Kgf-cm
Component P/N Qty
Screw E43-1257002-G68 2
6.6 ：Remove the 2screws (M2.5*7mm) that
stabilize the right LCD hinge.
Attention: the screw driver torque is 3.0-3.5Kgf-cm
Component P/N Qty
Screw E43-1257002-G68 2
GT60（MS-16F3）Disassembly Guide
6、SEPARATE UPPER CASE AND LOWER CASE
6.7：Remove the Keyboard.
6.8 ：Firstly push connector according to the
direction as pic shows; then remove the cable.
Component P/N Qty
Keyboard S1N-3EUS271-SA0 1
6.9：Remove the Touchpad cable.
Altri manuali per GT60
1
Indice
Altri manuali MSI Computer portatile
MSI
MSI Gaming GS66 Manuale utente
MSI
MSI PR310 Manuale utente
MSI
MSI GS76 Stealth Manuale utente
MSI
MSI Summit E13 Flip Evo Manuale utente
MSI
MSI Megabook S310 Manuale utente
MSI
MSI E7405 Manuale utente
MSI
MSI B12VEK-052IT Manuale utente
MSI
MSI FX400 Manuale utente
MSI
MSI MS-1034 Manuale utente
MSI
MSI Gaming GL73 Manuale utente
